Derek langit derek aula derek 11750mm

Stahl Portalkran Brückenkran Kran 10to 10000Kg 10t 11750mm + Laufschienen

Tahun pembuatan: 1970, Kondisi: bekas, nomor mesin/kendaraan: TH20010142, Demag overhead crane – crane track – hall crane Rated load / lifting capacity max. 10 t – 10,000 kg, span 11,750 mm External dimension with end carriages approx. 12,000 mm Fitted with steel hoist and pendant control Height from top of crane to hook approx. 900 mm End carriage length with buffer approx. 3,500 mm Lifting height (wire rope hoist): 10,000 mm Crane weight approx. 4,000 kg Including 2x 25 m running rails HEB 280, incl. power rail system! Girder lengths per side: Ffodpfxev A Rxkj Adgst 1x approx. 10 m 1x approx. 15 m Column spacing: 10 m / 10+5 m Crane is dismantled and immediately available ex location 75053 Gondelsheim Used condition ----- Also available: pillar jib cranes and wall-mounted jib cranes, Demag KBK and Abus HB systems, as well as models by Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible – please enquire with your postcode Collection preferred

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Ffodpfetyyn Hox Adget Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Ffodovx E Ncspfx Adgjt Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock

Kondisi: bekas, Tahun pembuatan: 1988, X-axis travel 0600 mm y-axis travel 450 mm z-axis travel 450 mm Quill stroke 80 mm Table size 1000 x 400 mm Spindle speeds 20 - 3000 rpm Ffjdpfx Adeu Rt I Ijget Spindle taper SK 40 Feed rate – automatic programming 1 - 4000 mm/min Rapid traverse 6 m/min Control Philips 432 Drive power 12 kW Total power requirement 15 kW CNC control Philips 432, swiveling vertical head, coolant pump, hydraulic tool clamping, automatic central lubrication, machine lamp, chip collecting tray with splash guard enclosure.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. Fjdpfxofg E Hpe Adgsft - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Tahun pembuatan: 1992, Kondisi: sangat baik (bekas), Gebrauchte 700-Tonnen-H-Rahmen-Hydraulikpresse zu verkaufen Hersteller: Müller Presskraft (t): 700 Anzahl der Zylinder: 2 Tischabmessungen (X-Y/mm): 4000×2200 Fodpjhcfzksfx Adgjft Stößelabmessungen (X-Y/mm): 4000×2200 Hub (mm): 1400 Durchgangshöhe bei O.T. (mm): 1920 Zugkissendruck (t): 400 Zugkissenhub (mm): 500

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed, left rotation: max. 10,000 rpm Spindle speed, right rotation: max. 10,000 rpm Distance between uprights: 2,500 mm Ffodpsu Nc Emefx Adgst Spindle-to-table distance (vertical): 1,230 mm Table clamping surface: 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight: approx. 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-axis gantry milling machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, type fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, type rotary table with indexing disc, for 32 tool holders Chip conveyor: 2 hinged belt conveyors, manufacturer DGS, with coolant tank, insertion length 8,500 mm Manufacturer BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil/water cooling unit for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via control panel type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with inspection windows and safety doors) Hydraulic system Work area lighting

Kondisi: bekas, Tahun pembuatan: 2018, kran-sufitowy-demag-udźwig-16-ton-rocznik-2018 Producent DEMAG Cranes & Components GmbH – Niemcy Typ Przemysłowy suwnica pomostowa z napędem – jedno- lub dwudźwigarowa Zastosowanie przemysłowe Ciężkie podnoszenie w hutach, zakładach konstrukcji stalowych, warsztatach ślusarskich, obróbce mechanicznej oraz magazynach logistycznych Główne parametry techniczne: - Udźwig nominalny: 16 ton (16 000 kg) - Rok produkcji: 2018 - Producent: DEMAG – światowy lider rozwiązań dźwigowych - Napęd jazdy po szynach - Wciągnik linowy elektryczny (standard DEMAG, wysokiej wydajności) - Zasilanie: przemysłowe trójfazowe - Sterowanie: kaseta wisząca lub pilot radiowy (w zależności od konfiguracji) - Stan: używany – nowsza konstrukcja, solidna budowa Fodjxb D Nvopfx Adgsft 🧩 Zastosowanie maszyny Suwnica pomostowa DEMAG 16T zaprojektowana jest do ciężkich prac przeładunkowych w wymagających warunkach przemysłowych. Wysoka nośność oraz nowoczesna konstrukcja gwarantują wydajność, bezpieczeństwo i długą żywotność. ⚙️ Cechy / wyróżniki - Średnio-wysoki udźwig (16T) dla ciężkiego przemysłu - Nowszy rocznik (2018), spełniający aktualne normy bezpieczeństwa - Zintegrowane systemy podnoszenia i elektryczne DEMAG - Możliwość integracji z systemami automatyki i sterowania radiowego

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen-Hydraulikpresse Fsdpfx Aohcnxrsdgsft Presskraft: 500 Tonnen Tischabmessungen (x-y/mm): 3000 × 1800 Stößelabmessungen (x-y/mm): 3000 × 1800 Hub (x/mm): 850 Hübe pro Minute: von 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen verfügbar

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material Fjdpfed Iipmox Adgjft 6. Vise opens