Clamping plate

Stahl 505/510/H50 mm

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. Csdsr A Hcbjpfx Aavori The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 20 h, diameter putar di atas sled silang: 300 mm, panjang pembubutan: 1.350 mm, diameter pembubutan: 510 mm, lubang spindel: 50 mm, kecepatan spindel (maks.): 2.500 rpm, daya motor spindle: 7.500 W, pergeseran cepat sumbu Y: 8 m/menit, pergerakan cepat sumbu Z: 8 m/menit, kecepatan rotasi (min.): 2.500 rpm, jarak gerak quill: 160 mm, diameter quill: 75 mm, gores kuas bulu: 160 mm, diameter ayun di atas peluncur silang: 300 mm, kecepatan pemakanan sumbu X: 2 m/menit, laju pemakanan gandar Y: 2 m/menit, berat benda kerja (maks.): 600 kg, diameter pembubutan di atas carriage atas: 300 mm, berat keseluruhan: 2.700 kg, diameter pemasangan: 40 mm, Perlengkapan: dokumentasi / manual, Style CNC is a company specializing in the manufacture of CNC lathes and milling machines designed for single-piece or small batch production. Crsdpfxow Eum Ao Aavei If you operate a tool shop, prototyping facility, or provide services requiring an exceptionally fast turnaround, Style offers an ideal solution. The intuitive graphical software enables you to create programs directly on the machine’s touchscreen within just a few minutes. Currently, we offer for sale a demo machine with a limited number of dry-run hours. The machine is sold with a full 12-month warranty and includes commissioning and operator training. In Poland, Style CNC has its own dedicated service branch.

Kondisi: bekas, Cup Grinding Machine Manufacturer: Gustav Brueckner Model: FSH 1 Maximum distance: Table to grinding wheel 200 mm Table size: 315 x 135 mm 380 Volt Crjdpfx Aajcv Tb Dsvoi 0.75 kW 1.85 Amps Space required: Depth 650 x Width 600 x Height 1600 mm

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine no.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380 V / 50 Hz Crjdsgyd S Sopfx Aavei Rated current: 35 A Connected load: 7.5 kW The machine has been fully overhauled and is therefore in excellent condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 87.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 600 mm, diameter putar di atas sled silang: 410 mm, kecepatan spindel (min.): 22.000 rpm, tr-001 Codpfsyq Hq Nox Aavsri

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang total: 5.000 mm, lebar total: 1.200 mm, tinggi total: 820 mm, berat keseluruhan: 760 kg, daya: 2,2 kW (2,99 hp), tegangan masuk: 400 V, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, henti darurat, de-001 Cjdpfx Ajwynarsavjri

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya laser: 30 W, jenis pendinginan: udara, lebar total: 60 mm, tinggi total: 1.660 mm, panjang total: 80 mm, berat keseluruhan: 80 kg, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser is essential for permanent marking. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without advanced programming knowledge. The software automatically increments serial and article numbers after prior configuration. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a mount and Windows operating system. Optionally, the LAS 28 laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany Codpeunh Hrofx Aavjri • Fiber laser 30W (optional 20 Watt or 50 Watt) • Wavelength 1064nm • Marking field size 150x150mm (Optional: 200x200) • Optional: Rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance detection • Signal light for operating status display • Marking software EZCAD (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminium profile • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660 mm (L x W x H) • Weight: approx. 80 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, CNC control: Fanuc Series Oi-MF Machine in as-new condition, only 150 spindle hours. - Box guideways - Gear stage - Internal coolant supply - Various tool holders and 1 x machine vice Travels: X-axis travel: 850 mm Y-axis travel: 530 mm Z-axis travel: 530 mm Spindle nose (to table surface): 100–630 mm Spindle axis to column surface: 590 mm Table: Table size: 530 x 950 mm Maximum table load: 800 kg T-slots (width x number x pitch): 18 x (5) x 100 mm Spindle: Spindle speed: 8,000 rpm Spindle taper: BT-40 Spindle power: 7.5 / 11 kW Feed rates: Rapid traverse: 20 / 20 / 20 m/min Cutting feed rate: 1 – 10,000 mm/min Automatic tool changer: Cjdpfxowa Ip Ho Aavori Number of tools: 24 Tool taper: BT-40 MAS Pull stud: P-40T (45°) Max. tool diameter: Ø 80 mm Max. tool diameter (no adjacent tool): Ø 150 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool to tool): 2.5 sec Tool change time (chip to chip): 6 sec Machine dimensions: Footprint: 2,450 x 2,700 mm Machine weight: 6,000 kg Maximum machine height: 2,900 mm Air supply connection: 7 kg/cm²

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 46.510 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 475 mm, berat keseluruhan: 6.650 kg, kecepatan spindel (maks.): 20.000 rpm, jam operasional spindle: 7.658 h, jumlah slot dalam magazin alat: 20, Perlengkapan: konveyor serpihan, Pengendali: Heidenhain TNC 640 Luas meja: 1.100 x 570 mm Beban meja maksimum: 1.000 kg Kecepatan gerakan cepat X / Y / Z: 42 m/menit Konveyor serpihan, Probe pengukuran, Crsdps Afymvofx Aavei Sistem pendingin internal.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Diameter meja: 1000 mm Crsdpfx Aaozqkizovei Diameter kerja maksimum: 1250 mm Modul: 12 Langkah maksimum: 200 mm SEMUA BANTALAN TELAH DIGANTI DENGAN YANG BARU.