Penggiling lubang

STANKO 3k228a

Kondisi: bekas, Tahun pembuatan: 1977, Pressure: 250 t Stroke: 40 - 190 mm Strokes per minute: 40 /min Throat depth: 500 mm Clearance between side frames: 1,050 mm Shut height: 615 mm Table dimensions: 1,380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ffsdsvuuaispfx Abheu Ram area: 1,200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Space requirement (L x W x H): approx. 2.0 x 2.5 x 3.95 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with: motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand operation

Kondisi: bekas, x-travel 1050 mm y-travel 600 mm z-travel 600 mm Ffodpjvnh Umefx Abhou Control: Fanuc Machine weight approx. 7200 kg 8000 rpm Tool holder: 24

Kondisi: baik (bekas), Used radial drill SASS Mod. TRM 2200 Excellent condition, fully operational. Supplied with cubing block. Maximum drilling diameter in solid cast iron 20-22: 100 mm Fedpfx Abeikqz Sehjfu Maximum drilling diameter in solid steel R=60: 80 mm Spindle sleeve diameter (sliding): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor (rpm): 18 to 1,600 Automatic feeds Maximum arm reach (from column edge to spindle axis): 2,230 mm Drilling radius (min – max): 660 to 2,505 mm Head travel on arm: 1,845 mm Vertical arm travel: 1,040 mm Column diameter: 550 mm Column height with motor: 3,720 mm Base plate height: 260 mm Base working surface: 2,490 x 1,230 mm Spindle motor power: 11 HP Weight: 9,000 kg

Kondisi: bekas, en-001 Ffsdowc A Snepfx Abhju

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 1.000 mm, panjang pembubutan: 8.000 mm, panjang total: 10.500 mm, A used lathe from the Italian manufacturer Leopold Pontiggia, model NH 500, is being offered for sale. Technical specifications: Ffjdpfx Abov Epigjhju Swing over bed: 1,000 mm Turning length: 8,000 mm Comprehensive equipment as shown in the photos: - 1 x 3-jaw chuck - 1 x 4-jaw chuck - 1 x steady rest - Various adapters

Kondisi: bekas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Ffsdpfx Asu Uu S Tobheu Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 spm Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on the table Change gears

Kondisi: hampir baru (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 35.000 kg, gaya penekanan: 250 t, jenis arus masuk: tiga fasa, daya: 30 kW (40,79 hp), gaya punching: 250 t, tegangan masuk: 200 V, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Ffsdpeu Dxb Tsfx Abheu Year of Manufacture: approx. 1991 Stroke Length: 170 mm Shut Height Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Power: 3x200V (!!), 30kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dispensing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0–115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2–150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, space requirement approx. 3.0x1.5 m Fodsuy Ifgepfx Abhofu The machine will be equipped with a new Siemens S7 control system including a new operator panel before sale. The dressing spindle for the grinding wheel is electrically operated via a servomotor. The machine will be completely overhauled, with defective parts repaired or replaced. Various options available (coolant system, infeed/outfeed systems, workpiece rulers, etc.).

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2,100 mm, width: 1,400 mm, height: 950 mm, weight: 1.6 t, with documentation. An on-site inspection is possible. Ffedpfx Abeqzkdmsheu

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Ffsdpfjtzdyzjx Abhju