Faceplate

Stankoimport 400 mm

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system Lhodeiw Dlkjpfx Aahor - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideally suited for the production of keyways. Upon request, broaching tools and arbors can also be supplied. The machine is powered up and ready for demonstration in our warehouse.

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Lhjdpfsixntwjx Aahor Year of manufacture: 1985 (overhauled) Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile force: 10,000 kg at 3 m/min Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 30 m/min Maximum stroke: 1,200 mm Broaching tool clamping: universal pulling head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table opening: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), Translation: Centre distance: 400–800 mm, Spindle speed: 1000–2700 rpm, Workpiece diameter: 10–300 mm, Grinding wheel diameter: 40–300 mm, Swivel angle: -45 to +45°, Length: 3000 mm, Width: 2500 mm, Height: 2275 mm; equipped with Hoffmann oil mist separator (new filter cartridges), Faudi gravity band filter unit, hydraulic power unit, additional grinding head for grinding worm gears, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, electrical diagrams in paper format. Inspection possible. Lhodpfxsrgahxj Aahsr

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Lhsdpfx Aaogyd T Eshjr Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz

Kondisi: bekas, Tischabmessungen: 1120 x 1250 mm Technische Daten: * Hubhöhe (auf/ab): 1000 mm * Verfahrweg (vor/zurück): 1200 mm * Verfahrweg (links/rechts): 1000 mm Ledpo Dv Nxefx Aahohr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, de325c10-799a-411e-b277-0e4bd7ab981b Lhodjwf Sfvjpfx Aahjr

Kondisi: bekas, Tahun pembuatan: 2007, Control system: Siemens Sinumerik 840 D Weight: 57,000 kg Operating voltage: 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 Designed for hobbing cylindrical and worm gears, as well as all other regularly occurring generatable profiles and shapes on cylindrical workpieces. Gleason’s large gear hobbing machines offer maximum productivity for roughing and finishing of cylindrical gears across various industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear manufacturing, and many more. The drive power range takes future tooling developments into account. Naturally, the hob head drive is backlash-free. These machines are especially well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and comes equipped with the corresponding chip conveyor for both processing methods. The machine is fitted with an internal profile milling head as a motorized milling head. --> Working area and technical data Workpiece nominal diameter: 2,400 mm Maximum hobbable diameter approx.: 2,800 mm Minimum/maximum center distance between cutter and workpiece axis: 100/1,200 mm Maximum axial slide travel (special version): 1,300 mm Maximum clampable cutter (internal milling head): Maximum diameter: 440 mm Maximum cutter width: 90 mm Internal profile milling head swivel range/vertical axis: +/- 15° Cutter arbour taper: HSK-B160 Maximum cutter traverse: 300 mm Table diameter: 2,500 mm Dividing wheel diameter: 2,200 mm Ljdpfjwzyp Iex Aahohr Table bore: Diameter: 800 mm Depth: 875 mm Maximum table load approx.: 40,000 kg Maximum feed and rapid traverse rates: Axial (Z-axis): 4,000 mm/min Radial (X-axis): 3,000 mm/min Tangential (Y-axis): 3,000 mm/min Cutter cooling lubrication unit/Electric centrifugal pump: approx. 150 l/min Chip conveyor discharge height (raised): 1,600 mm Raised main column: 1,300 mm axial slide travel Internal profile milling head as motorized milling head instead of standard motor milling head Maximum hobbing depth in steel with approx. 600 N/mm² tensile strength: approx. 65 mm Stepless cutter speed: 50 – 150 rpm Maximum cutter diameter: 440 mm Minimum cutter root diameter: 310 mm Maximum cutter width: 90 mm Minimum internal diameter at 0° helix angle: 800 mm+ Maximum workpiece height at 0° helix angle: 600 mm Maximum workpiece ring thickness (incl. clamping fixture): 500 mm

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 01093.01-808, Mesin bubut L&Z bekas, merek: VDF BÖHRINGER, tipe: DUE 630, tahun pembuatan: 1986, nomor mesin: 01093.01.-808. Panjang bubut: 3000 mm Diameter bubut: 630 mm. Dilengkapi dengan 2 steady rest, chuck, faceplate, dan dudukan Multifix. Lsdpfexd Df Nex Aahshr

Tahun pembuatan: 1965, Kondisi: bekas, Slot width: 3 - 90 mm Drawing length: 430 mm Working speed: 4 - 12 m/min Ljdpetv Iatofx Aahohr Slot length: 400 mm Return speed: 15 m/min Total power requirement: 5.5 kW Machine weight: approx. 1.4 t Space requirement: approx. 1.3 x 1.7 x 1.5 m Includes various pull broaches and guides

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of Manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine No.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with manual, heavy-duty tool feeder Broaching stroke: 1,500 mm Pulling force: 10,000 kg (100 kN) Mount in pull bridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Workpiece diameter: max. approx. 750 mm (limited by the tool tray of the feeder) Cutting speed: Hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: Hydraulically infinitely variable from 5 m/min to 30 m/min Machine footprint (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant and cutting fluid system • Manually operated tool feed • Broaching slide with pull head mount is guided flat on both sides • Adjustable pull force limitation Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width • Adapter sleeve for pull bridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for the production of keyways with flat broaching tools, as well as for profile broaching. Thanks to the machine bed and robust tool feeder, the machine is well suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is located in our warehouse and can be inspected under power. Currently, the machine has not been technically or visually refurbished, but is ready for immediate use. Pull heads for profile broaching are mostly available upon request, depending on DIN standard, dimension, and stock. Ledpfxor A Hdgo Aahjhr Direct contact details for us as well as further information can be found in the attached PDF document.