Lengan derek

Stapler Center Fritz GmbH Teleskopkran 5000 Kg bei LSP 600 mm

Kondisi: sangat baik (bekas), Perlengkapan: Pelat tipe tersedia, Mobile fuel tank systems for A1-A3 (KC diesel, KA petrol/diesel, as well as collection tanks), - Double-walled construction - Capacities from 250 to 1,000 litres - Partly with IBC approval - 12V / 24V / or 230V pumps available as needed - Automatic filling nozzle - Vertical or horizontal design - Some units with lockable pump covers - Optional flow meter with daily and total counter - All units supplied with new DEKRA inspection Loading and transport can be organised. Only serious and legitimate enquiries will be answered. Please provide: Nodogx E N Ijpfx Abmewp Name, e-mail address, and phone number.

Kondisi: baru, Payload capacity 30,000 kg Length 8,000 mm Width 2,500 mm Height 790 mm Rear axle: steerable Front axle: steerable Tyre dimensions 425 x 260 / dual wheels Machine weight approx. 3.7 t Required space approx. 9.9 x 2.5 x 0.8 m Heavy-duty trailer featuring: Nwodpfofrzv Eox Abmjp - Double steering system - Small turning radius - Tip-over protection via steering angle limiter - Extremely robust design, resulting in minimal maintenance requirements - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. Available in your preferred RAL colour upon request. Looking for different load capacities or dimensions? Please contact us.

Kondisi: seperti baru (mesin pameran), Soundproofed Generator Set in Insulated Container The unit is in absolutely new condition (only 104 operating hours). Krampitz tank is integrated in the container and filled with 500 l diesel. Engine: IVECO Generator: STAMFORD Continuous output: 20 kVA / 16 kW Frequency: 50 Hz Rated current: 28 A Voltage: 400 V / 231 V Speed: 1500 rpm Weight: approx. 4,000 kg SÄBU container / Dimensions: 4.00 m length, 2.60 m width, 3.05 m height - Control system - Ventilation system for fresh air and exhaust gas system - 700 litre tank - Sound and thermal insulated container Nodoiw Ed Hspfx Abmewp Loading and transport are optionally available. Only serious and legitimate enquiries including name, email address, and phone number will be answered.

Kondisi: baik (bekas), Diesel engine, drive motor, marine diesel, injection pump, fuel pump, diesel fuel injection pump, diesel generator set, diesel generator - Manufacturer: Bosch, injection pump from MWM RHS 518V16 generator set - Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 - Feed pump: Bosch FP/K 22 P11 - Shaft: Ø20 - 25 mm / M18x1.5 - Individual components: see photos - Dimensions: 1000/170/H290 mm - Weight: 41 kg Nwjdpsivfgfjfx Abmjp

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat kosong: 690 kg, berat muatan maksimum: 2.810 kg, berat keseluruhan: 3.500 kg,

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 30, masa garansi: 12 bulan, Our company (EXPOGLASS®) manufactures machinery and glass racks for the glass industry. Our product range includes a pull-out glass rack 321 x 255. New product available upon request. Technical specifications: Nwjdpjh Uudvjfx Abmjp - Number of drawers: 30 - Pane size: 2550 x 3210 mm for storage - Load capacity per drawer: 1500 kg - Loading area width: 80 mm - Total rack width: 4460 mm - Orientation (drawer tilt side): universal (depending on installation) - Number of positioning rollers per drawer: 8, fitted with bearings - Construction: modular (can be combined) - Front wheel material of drawer: floor-protecting polyamide - Rear wheel of drawer: steel, turned and mounted, with double flange, running on steel rail We export our products worldwide.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: diesel, berat keseluruhan: 11.000 kg, Tahun pembuatan: 1980, jam operasional: 28.000 h,

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system Njdjg Ey Rfjpfx Abmewp - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: baru, Tahun pembuatan: 2024, en Nwodpeu Th Ekefx Abmsp

Kondisi: baru, Tahun pembuatan: 2025, Table length 3000 mm Table width 2000 mm Table height 200 mm Weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length: 2000 mm • Width: 3000 mm • Height: 200 mm • Weight: 1700 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine laser-engraved scale • Reinforced with welds and ribs on the underside • Optimum working height: 820–865 mm • 8x height-adjustable support legs • Optional matching accessory set available Our welding tables are manufactured using cast quality grade HT 300 and are nitrided as a whole after machining. Additionally, these tables feature a precise fine scale engraved using laser technology. To ensure adequate stability, our welding tables are reinforced on the underside with welds and ribs (see images). Furthermore, they undergo a 3-day gas nitriding process, which increases, among other things, the corrosion resistance, as well as the fatigue and vibration resistance of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm, which allows for a variable working height from 820 to 865 mm. Other available sizes: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 Nwsdpfx Abjuia Ntemjp • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Images do not correspond to the original size and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D welding table – 3D clamping systems – 3D precision welding tables