Berbeda

Stenz 4000 envelope feeder

Kondisi: sangat baik (bekas), Voltage: 220-240VAC // Current: 1.8A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH CONVEYOR BELT Diverting Belts: For envelope format 10.5cm x 14.8cm and in portrait orientation, the diverting belts should be adjusted toward the central transport belt. Rule: For large envelopes, move the diverting belts outward; for small envelopes, push the diverting belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ-FEEDER requires no synchronization. Guide the feeder by the handles into the printing machine and set the required height using the hand crank. Important: Only after setting the print height, secure the rear rollers and check for stability. Switch on the machine and start printing. For single-sheet feeder printing presses (GTO), adjustable tilt is available. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum print speeds. Compatible with all 36 x 52 printing presses, regardless of feeding system (stream/overlapping or single-sheet feed). – No mechanical modifications to the press are necessary. – No synchronization settings required due to laser technology. – The ultra-short setup time enables cost-effective operation from as few as 1,000 envelopes. – User-friendly handling. – The design of the feeder enforces overlap, so the throughput of the Stenz Feeder is not restricted. – Minimal wear parts for an extremely long service life. – Already certified for use on thousands of different printing presses. – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Dodpfx Aoh Eibaoktekn Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Minimum/maximum web width: 214mm/686mm, maximum roll diameter: 1500mm, production output: 1000 envelopes/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Includes 2+1 printing unit. The machine can cut and die-cut envelopes with windows. Documentation available. On-site inspection possible. Dsdpfx Aouqndisktekn

Kondisi: sangat baik (bekas), P/N: 190.101 // Serial No.: 616 Dksdjgnlb Aopfx Akten Additional MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. AVAILABLE ON REQUEST.

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 1107, Other MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our stock. AVAILABLE UPON REQUEST. Dodpfx Akoihvl Istokn

Kondisi: baik (bekas), Mesin Hot Stamping Heidelberg Cylinder KSB 40×57. Model yang sangat langka di pasaran. Mesin siap operasi dan dalam kondisi sangat baik. Sudah diperiksa. Unit hot stamping baru terpasang dari pabrik. Juga cocok untuk memotong/mencetak bentuk. Pelumasan sentral. Format 40x57 cm. Berat 3500 kg. Daya 380V. Termasuk komponen tambahan, filler, dan kunci letterpress. Dkjdpfx Ajy Ah Ibokton

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 783, Other MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our stock. AVAILABLE UPON REQUEST. Dkjdjiiv Dnepfx Akton

Kondisi: bekas, Wahli-Stream Feeder TM 530 adalah feeder andal yang dirancang untuk penanganan kertas yang efisien. Model ini diproduksi oleh Wahli di Jerman. Harga tersedia berdasarkan permintaan. Perangkat ini mendukung format A2 dan dirancang untuk meningkatkan produktivitas pada proses pencetakan dan finishing. Format: 360 x 420 mm Perlengkapan: PENGUMPAN AMPLOP OTOMATIS (dengan penyedot vakum) COCOK UNTUK MESIN CETAK DENGAN FEEDER STREAM/SATUAN PENYESUAIAN VACUUM, TINGGI, DAN KECEPATAN KONVEYOR Ukuran amplop minimum: 7,6 x 12,7 cm Ukuran amplop maksimum: 36 x 42 cm Dedpfxevphzpo Aktokn

Kondisi: bekas, Tahun pembuatan: 2016, Year of manufacture: 2016 Condition: very good Configuration: - automatic feeding - automatic separation - jogger Technical specifications: - maximum speed - single-sided 18 m/min - feeding system - automatic, vacuum belt, table capacity 28 cm - sheet overlap adjustment - screw-controlled, overlap accuracy ± 2 mm - separation of laminated sheets - automatic - paper thickness - 115–500 g/m² - main roller pressure - pneumatic - compressor - standard, integrated in the machine frame - minimum sheet size (w×l): 20x30 cm - maximum sheet size (w×l): 53×75 cm - maximum output - 1500 B2 sheets/hour - temperature control - 80–140 °C, roller heating time 8 minutes - voltage - 230 V AC, 50-60 Hz - power consumption - 3850 W - mechanical parameters - footprint (w×l) 100×260 cm, weight: 390 kg - non-stick roller surface Machine accessories: - foiling/gilding unit Dodey Exd Eopfx Aktskn Finishing applicator. Device enabling the use of special foils which adhere only to printed areas on a sheet produced by a digital press. Can also be used to achieve a spot varnishing effect in combination with gloss-clear foil.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 003, Serial No.: 001 Dedpfx Aet Hrmtoktskn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1979, de_to_hu_it_lt_lv_nb_nl_pl_001 Dedpfsyyy Nfjx Aktokn