Mesin pemotong rumput

Stihl Stihl MS 500i

Kondisi: bekas, SPE Renergi Niedertemperatur-Trockner Der Renergi Trockner wird zur Trocknung von Sägemehl und anderen Materialien zur Herstellung von Biokraftstoffen eingesetzt. Der Trockner kann Sägemehl, Rinde oder Hackschnitzel von einem Feuchtigkeitsgehalt von ca. 50 % auf einen Wert von etwa 10 % trocknen. Dieser Niedertemperatur-Trockner nutzt Warmwasser (oder Heißwasser) ab einer empfohlenen Temperatur von 65 °C. Die maximale Wassertemperatur beträgt 110 °C. Netzanschlusssicherheit: Der Trockner darf ausschließlich mit 3x400 V AC (630 A) 50/60 Hz und einer separaten Schutzleiterzuleitung betrieben werden. Netzanschluss-Daten: • Spannung: 400 V AC, Drehstrom • Empfohlene Absicherung in der Zuleitung: maximal 3x630 A • Typischer Stromverbrauch: 200 kW Die Abmessungen des Trockners betragen ca. 17,4 x 5,7 Meter, bei einer Höhe von 10,7 Metern. Die erforderliche Stellfläche beträgt etwa 21,4 x 8,0 Meter. Die Mindestdeckenhöhe sollte 15 Meter betragen (bzw. mindestens 4 Meter über dem Einlauf des Mediums). Luftzufuhr: Für den Betrieb dieser Anlage ist eine Frischluftmenge von mindestens 24 kg Gas/s erforderlich, was 20 Nm³/s oder 72.000 Nm³/h entspricht. Luftdurchsatz: max. 200 Liter/min Luftdruck: mindestens 4,5 bar, empfohlen 6,0-8,0 bar Wasserversorgung: Heißwasserzufuhr mit einem Durchfluss von 32 dm³/s. Wasserdruck: min. 1,5 bar, max. 6,0 bar Betriebstemperaturbereich: • Zulufttemperatur: -20 °C bis 50 °C Ppsdpewp Rqfjfx Al Ior • Relative Luftfeuchtigkeit: 0 % bis 60 % Rohmaterial/Medium: • Ausgangs-Feuchtigkeit: 45 % bis 55 % (Gewichtsprozent) • Ziel-Feuchtigkeit: 8 % bis 15 % im getrockneten Material Kapazität: • Der Zwei-Kammer-Trockner mit 4 m Breite verarbeitet typischerweise 2.400 kg Material mit 55 % Feuchtigkeitsgehalt pro Charge • Der Trockner kann 6.000 kg Rohmaterial mit einem Feuchtigkeitsgehalt von 55 % auf 10 % in etwa einer Stunde trocknen Der Trockner von SRE ist nach den europäischen Richtlinien konstruiert. Die Anlage erfüllt die grundlegenden Anforderungen der: • Maschinenrichtlinie 2006/42/EG • Niederspannungsrichtlinie (LVD) 2006/95/EG • EMV-Richtlinie 2004/108/EG Der Trockner befindet sich in der Gemeinde Straupe, Bezirk Cēsis, LV-4152, Lettland. Besichtigung an Werktagen von 08:00 bis 17:00 Uhr nach vorheriger Terminvereinbarung möglich. Der Trockner ist bereits demontiert. Sämtliche Elektropläne, Handbuch und Bedienungsanleitungen sind vorhanden. Auf Wunsch kann ein Ansprechpartner mit Erfahrung im Betrieb dieses Trocknertyps zur Beratung vermittelt werden. Preis: 20.000,00 EUR (zzgl. MwSt.)

Kondisi: baru, Tahun pembuatan: 2026, Table Saw Cormak TS255 is a precision woodworking machine distinguished by its advanced features and robust construction. Key advantages of the professional TS255 400V table saw for wood cutting: Precise Height and Angle Adjustment: The saw is equipped with an intuitive handwheel that enables accurate setting of both cutting height and angle. This ensures precision in various cutting operations. Parallel Fence: The machine is fitted with a parallel guide, ensuring stable and precise material guidance during cutting. Cast Iron Table and Table Extension: The work table is made of durable, ground cast iron, guaranteeing smooth material feed. Additionally, the machine is equipped with a table extension, increasing the working surface area. Stable Construction: The saw is designed for maximum stability and durability. This machine is dedicated for intensive use in all types of woodworking shops. Integrated Side Table: An additional advantage is the integrated side table, which significantly expands cutting possibilities, allowing work with larger components. Powerful Motor: The electric motor powered by three-phase current (2.2 kW, 4000 rpm) provides effective cutting of timber and the most demanding boards in any workshop. Application of the precision table saw with 254 mm circular blade: The Cormak TS255 table saw is a versatile machine renowned for its cutting accuracy and solid build quality. Its adjustable cutting height and angle, together with a stable structure, make it ideal for a variety of woodworking facilities. The integrated side table further expands its cutting capability. This is an indispensable machine for professional carpenters and demanding DIY enthusiasts alike. Technical Data Maximum blade diameter: 254 mm Rotational speed: 4000 rpm Blade tilt range: 90°-45° Maximum cutting depth at 45°: 50 mm Maximum cutting depth at 90°: 80 mm Worktable dimensions: 350 x 800 mm Ppjdpfx Aljvxhlgo Ier Sliding table dimensions: 240 x 1320 mm Maximum cutting width: 1250 mm Maximum cutting length: 1300 mm Continuous duty motor power S1: 2.2 kW Power supply: 400 V Weight: 180 kg Dimensions: 1550 x 1900 x 820 mm

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm Podpfx Alevz Hq Ho Iepr - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Perangkat baru - penjualan gudang - Pengangkatan bersifat mekanis. Harga yang tertera adalah harga netto dari lokasi gudang. Pjdpjw Sfdwjfx Al Ispr

Kondisi: baru, Screw compressor with refrigerant dryer Belt-driven. Space-saving. Cost-effective. Easy operation thanks to Infologic² Basic control system. Efficient compression stage. Ideal solution for industrial and workshop applications. Impressive compressed air quality. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Infologic² Basic control unit Refrigerant dryer: Integrated, refrigerant R513A Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Free air delivery at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor output; IP55: 7.5 kW Oil volume: 3.2 l Pressure dew point (refrigerant dryer, 20°C, 100% RH): approx. +3°C Installation data: Ambient conditions min. / max.: 1 / 46°C ΔT above cooling medium temperature: 2°C Cooling air requirement: 756 m³/h Free fan pressure: 30 Pa Sound level: 68 dB(A) Voltage / Phases / Frequency: 400 / 3 / 50 V / Ph / Hz Refrigerant dryer power (230V/50Hz): 0.27 kW Dimensions and weight: Podpfx Aswm Ih Ajl Iepr Length x width x height: 1540 x 665 x 1350 mm Weight: 240 kg Compressed air outlet: G 1/2" internal thread Compressed air receiver capacity: 270 l INCLUDES OPTION: Aftercooler C43 MINI (minimizes condensate accumulation)

Tahun pembuatan: 2007, Kondisi: baik (bekas), 930 USED Electric Bakery and Confectionery Deck Oven TECHNICAL SPECIFICATIONS - Number of baking chambers: 4 - Each chamber equipped with a steam injection option - Comes with: proofing cabinet, extraction hood EXTERNAL DIMENSIONS (cm): - Width: 98 - Height: 221 - Depth: 98 (with hood: 120) CHAMBER DIMENSIONS (cm): - Width: 60 - Depth: 48 - Height: 14 The unit is available for inspection at our warehouse (36-068 Bachórz, Poland). Ppsdpfx Aou Ra A Eol Ior Additional paid options: transport / installation / commissioning. The listed price is net (excluding VAT). WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. For more information: Witold +48 508 195 853

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a Milwaukee M18 demo set with full warranty. The power set includes: - Cordless percussion drill driver M18 FPD3-0X - Cordless compact impact wrench 1/2" M18 FIW2F12-0X - Cordless angle grinder M18 FSAG125X-0X - Cordless circular saw M18 FCS552-0 - Cordless reciprocating saw M18 FSZ-0 Pedpfx Alswzlwke Iepr - LED cordless handheld light M18 TLED-0

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 56 l, warna: kuning, berat operasi: 2.675 kg, berat muatan maksimum: 1.310 kg, tinggi angkat: 2.520 mm, kondisi ban: 100 persen, konfigurasi gandar: 4x4, jumlah tempat duduk: 1, kelas emisi: Euro 5, volume sekop: 0,45 m³, Tahun pembuatan: 2025, jam operasional: 3 h, Perlengkapan: hidrolik, kabin, penggerak semua roda, === MAIN SPECIFICATIONS === Year of manufacture: November 2025 Operating hours: 3 h (transport and test hours only) Operating weight: 2,675 kg Max. tipping load: 2,270 kg Bucket capacity: 0.45 m³ Transmission: Hydrostatic Drive: Permanent four-wheel drive Differential lock: Yes Quick coupler: Hydraulic Cab: Fully enclosed Cab heating: Yes Tyres: Pneumatic tires, suitable for rough terrain Engine manufacturer: Yanmar Engine power: 18.5 kW Pjdpoymxxwsfx Al Ispr Emission standard: Stage V Hydraulic output: 39 l/min CE certified: Yes === ADVANTAGES === New machine German-made Only transport / test hours CE certificate and complete documentation included Immediately ready for transport and operation === CONDITION === As new – unused machine with transport and test hours only. No wear, no previous owner. Fully inspected and available for immediate delivery. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). New Kramer 5045 wheel loader, manufactured in 11/2025 and equipped with only a few test hours. This compact yet powerful machine combines excellent manoeuvrability with a tipping load of 2,270 kg and a bucket capacity of 0.45 m³. Equipped with hydrostatic drive, hydraulic quick coupler, and a fully enclosed heated cab – ideal for construction sites, landscaping, and urban projects with limited space. Fully CE certified and available directly from stock. === DELIVERY === Crane loading possible on request. Flexible worldwide shipping options available. Transport professionally handled by Collé Rental & Sales.

Kondisi: baik (bekas), 001 Psdpjyz Dg Rofx Al Iepr

Kondisi: baru, Tahun pembuatan: 2021, en-GB Podpfxjtvf R Es Al Iopr