VS-22257 Stacker Palet Listrik Still EXU-SF 25, garpu 1600 mm

STILL EXU-SF 25

Kondisi: baru, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Special Equipment Included in Price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetric 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swing-out upper roll • Cone bending device • Foot switch Bodpog Tzbhsfx Am Iowl Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (LxWxH): 2100 x 760 x 1250 mm • Weight: 470 kg

Kondisi: baik (bekas), Tahun pembuatan: 2003, X 1740 mm, Y 766 mm, Z 660 mm 10.000 rpm Bwodjwyblzspfx Am Iol Suku cadang yang ditunjukkan dengan tangan tidak disertakan.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 7.600 h, Fungsionalitas: berfungsi sepenuhnya, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Kategori: Pusat Pemesinan Vertikal (VMC) No. Referensi: 311119 Kapasitas: 700 x 400 x 330 mm Tahun Pembuatan: 2000 Spesifikasi Teknis: SPINDEL Taper Spindel: BT 30 Kecepatan Spindel: 8000 RPM Motor Spindel: 3,7 / 5,8 kW KAPASITAS KERJA Gerak (XYZ): 700 x 400 x 330 mm Rel Pemandu: LM ATC Kapasitas Ganti Tool: 14 tool Bwodpfxex Ehi Ij Am Iel CNC Kontrol: Fanuc 16iM Detail Tambahan: Dengan Nikken 170 sumbu ke-4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 9.192 h, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 16.000 rpm, jumlah sumbu: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and offers 30 tool positions. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200 machine we offer for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining center C 1200 V • Heidenhain iTNC 530 CNC control • Spindle: 16,000 rpm • SK 40 tool taper • 30 tool stations • Fixed clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, ensuring excellent mass distribution and ideal conditions for high rapid traverses and feed rates • Lead screw diameter and pitch (X and Z axes): 40 / 20 mm • Lead screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) on X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20 °C ± 1 °C • Flushing/washing system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time (chip-to-chip) according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction buttons, feed control, rapid traverse, emergency stop, and enable switch • Machine hours – 11,927 h • Spindle hours – 9,192 h Additional equipment • Chip conveyor Bwsdpfx Amoylw Stj Isl • Heidenhain touch probe • Electronic hand control module (iTNC) Technical Specification Taper Size: SK 40

Kondisi: baik (bekas), Tahun pembuatan: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle: SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table size Length: 1626 mm Width: 914 mm T-slot width: 16.00 mm T-slot center distance: 125 mm Number of standard T-slots: 7 Max. table load (evenly distributed): 4,536 kg Integrated 4th axis (B axis) Table: 1626 mm x 813 mm Clamping surface diameter: 762 mm Adjustment range: 360° Max. workpiece swing diameter: 1270 mm Table load: 4,536.0 kg Max. rated power: 3.7 kW Continuous rotational torque: 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ± 30 arc-sec Repeatability: 15 arc-sec Rapid traverse B: 36°/sec Max. cutting feed B axis: 36°/sec Spindle centerline to table: 146 mm Max. cutting feed in X, Y, Z axes: 12.7 m/min Rapid traverse X: 15.2 m/min Rapid traverse Y: 15.2 m/min Rapid traverse Z: 15.2 m/min Axis motors Tool changer with 30 positions Max. tool diameter (full): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General information Coolant tank capacity: 360 L Dimensions Bwjdov N Di Aopfx Am Iol Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608.0 kg

Kondisi: bekas, Technical details: X-axis: 120 mm Z-axis: 610 mm Bodpfx Amswa A Hmj Iewl Diameter: - mm Measuring range Y-axis (height): 0 - 610 mm Weight: 19 kg Interfaces: 2x RS-232C, 2x USB-A/B Overall height: 950 mm Measuring system resolution: 0.0001 mm Power consumption: 43 watts Space requirements (W x D x H): 320 x 330 x 950 mm TWO-COORDINATE HEIGHT GAUGE with two probe holders: 0-872 mm manual adjustment speed air bearing two interfaces: 2x RS232C and 2x USB (A+B) reference standard 25 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, posisi kepala milling: 2.5 x 2.5 °, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar meja: 3.300 mm, panjang meja: 12.000 mm, diameter pemasangan: 50 mm, tinggi total: 48.750 mm, lebar total: 100.000 mm, panjang total: 212.000 mm, berat keseluruhan: 100.000 kg, Duplex-Fräsen bestehen aus zwei Maschinen, die sich gegenüberstehen und entweder separat oder als Einzelmaschine betrieben werden können. Das Werkstück kann mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen wie einzelnen Fräsmaschinen Erhöhung der Fertigungsgenauigkeit durch Komplettbearbeitung des Werkstücks in einer Aufspannung (in den meisten Fällen) Eine einzige Bedienperson kann die Duplex-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition dank hoher Produktivität Die Duplex-Lösung ermöglicht verschiedene Konfigurationen: Einzelner Arbeitsbereich, Pendelbearbeitung Geeignet für die Bearbeitung von Baggerarmen und Auslegern, z.B. für CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Antriebsleistung der Spindel: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Bwsdpfxsrx Rxtj Am Isl Vorschub Z-Achse: 10.000 mm/min Fräskopf-Autopositionierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Programmable 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and a ball screw for the X-axis. Bwjdpfx Aswrzkzsm Iel Technical data: X-axis travel (longitudinal): 10,000 mm Y-axis travel (cross): 1,500 mm Z-axis travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed range (2-step): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main drive power (100% duty cycle): 37 kW Machine weight approx.: 39,300 kg Technical data, accessories, and machine description are not binding.

Kondisi: bekas, Tahun pembuatan: 2003, verfahrweg-x-1200-mm-hermle-c1200v Bwjdpfx Ajx E Dr Ijm Ijl

Kondisi: baik (bekas), Tahun pembuatan: 2003, panjang pembubutan: 1.505 mm, Turning and Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control system: Sinumerik Power line Technical Specifications: Main spindle ISM 90 drive power: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Magazine capacity: 120 slots Milling spindle tool holder: HSK 63 Counter spindle ISM 90 drive power: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed for driven tools: Number of turret stations: 12 Tool holder: VDI 40 Equipment: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D touch probe Bwodpfx Aswzbq Tem Isl - Tailstock function for counter spindle - Automatic sliding doors