Forklift diesel

Still RC 42-40

Kondisi: bekas, Tahun pembuatan: 2021, kapasitas angkut: 4.000 kg, tinggi angkat: 4.400 mm, panjang total: 4.000 mm, - Travel speed with/without load: 24 km/h - Cabin roof made of plastic, with heating - Number of hydraulic valves: 3 - Rated capacity/rated load: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load loaded (kg): 10,780 / 1,360 - Axle load unloaded (kg): 3,300 / 4,060 - Track width (mm): 1,180 - Track width (mm): 1,190 - Mast/carriage tilt (α/β °): 6/12 - Seat height relative to SIP/stand height (mm): 1,315 - Coupling height (mm): 380 - Aisle width for pallets 1,000 x 1,200 crossways (AST mm): 4,597 - Aisle width for pallets 800 x 1,200 lengthways (AST mm): 4,797 - Turning radius (mm): 2,830 - Minimum pivot point distance (mm): 900 - Travel speed loaded/unloaded (km/h): 22/24 - Lifting speed loaded/unloaded (m/s): 0.45/0.49 - Lowering speed loaded/unloaded (m/s): 0.38/0.26 - Tractive force loaded/unloaded (kN): 28/21 Godpfx Aoy E Uf Segrsuc - Gradeability loaded/unloaded (%): 20/20 - Service brake: Mechanical/Hydraulic - Rated speed (l/min): 2,200 - Number of cylinders: 4 - Displacement (cm³): 2,482 - Emission level according to EU Regulation 2016/1628 Stage III a - On-board voltage (V): 12 - Drive type: Torque converter - Operating pressure for attachments (bar): 200 - Oil flow for attachments (L/min): 101 - Fuel tank capacity: 90 - Tow hitch type: DIN 15170 Pin

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 1.000 kg, Various very heavy-duty welding tables, machined, some plasma-nitrided Sizes: - 1 x 1 meter, €1,500 - 1.2 x 1.2 meters, €1,700 Gedpfewu Exzsx Agrjuc - 1.5 x 1.5 meters, €1,900 - 2 x 1 meter, €2,300; plasma-nitrided €3,300 - 2.4 x 1.2 meters, €2,900; plasma-nitrided €3,900

Kondisi: bekas, Tahun pembuatan: 2021, kapasitas angkut: 4.000 kg, tinggi angkat: 4.000 mm, panjang total: 4.000 mm, - Travel speed with/without load: 24 km/h - Cabin roof made of plastic, with heating - Number of hydraulic valves: 3 - Rated capacity/rated load: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load loaded (kg): 10,780 / 1,360 - Axle load unloaded (kg): 3,300 / 4,060 - Track width (mm): 1,180 - Track width (mm): 1,190 - Mast/carriage tilt (α/β °): 6/12 - Seat height relative to SIP/stand height (mm): 1,315 - Coupling height (mm): 380 - Aisle width for pallets 1,000 x 1,200 crossways (AST mm): 4,597 - Aisle width for pallets 800 x 1,200 lengthways (AST mm): 4,797 - Turning radius (mm): 2,830 - Minimum pivot point distance (mm): 900 - Travel speed loaded/unloaded (km/h): 22/24 - Lifting speed loaded/unloaded (m/s): 0.45/0.49 - Lowering speed loaded/unloaded (m/s): 0.38/0.26 - Tractive force loaded/unloaded (kN): 28/21 - Gradeability loaded/unloaded (%): 20/20 - Service brake: Mechanical/Hydraulic - Rated speed (l/min): 2,200 - Number of cylinders: 4 Gsdpjy S Ep Uefx Agrouc - Displacement (cm³): 2,482 - Emission level according to EU Regulation 2016/1628 Stage III a - On-board voltage (V): 12 - Drive type: Torque converter - Operating pressure for attachments (bar): 200 - Oil flow for attachments (L/min): 101 - Fuel tank capacity: 90 - Tow hitch type: DIN 15170 Pin

Kondisi: bekas, Tahun pembuatan: 2021, kapasitas angkut: 4.000 kg, tinggi angkat: 4.000 mm, panjang total: 4.000 mm, - Travel speed with/without load: 24 km/h - Cabin roof made of plastic, with heating - Number of hydraulic valves: 3 - Rated capacity/rated load: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load loaded (kg): 10,780 / 1,360 - Axle load unloaded (kg): 3,300 / 4,060 - Track width (mm): 1,180 - Track width (mm): 1,190 - Mast/carriage tilt (α/β °): 6/12 - Seat height relative to SIP/stand height (mm): 1,315 - Coupling height (mm): 380 - Aisle width for pallets 1,000 x 1,200 crossways (AST mm): 4,597 - Aisle width for pallets 800 x 1,200 lengthways (AST mm): 4,797 - Turning radius (mm): 2,830 Gsdey E Uapspfx Agreuc - Minimum pivot point distance (mm): 900 - Travel speed loaded/unloaded (km/h): 22/24 - Lifting speed loaded/unloaded (m/s): 0.45/0.49 - Lowering speed loaded/unloaded (m/s): 0.38/0.26 - Tractive force loaded/unloaded (kN): 28/21 - Gradeability loaded/unloaded (%): 20/20 - Service brake: Mechanical/Hydraulic - Rated speed (l/min): 2,200 - Number of cylinders: 4 - Displacement (cm³): 2,482 - Emission level according to EU Regulation 2016/1628 Stage III a - On-board voltage (V): 12 - Drive type: Torque converter - Operating pressure for attachments (bar): 200 - Oil flow for attachments (L/min): 101 - Fuel tank capacity: 90 - Tow hitch type: DIN 15170 Pin

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 873 h, kapasitas angkut: 5.000 kg, tinggi angkat: 3.300 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, tinggi konstruksi: 2.450 mm, lebar kerangka garpu: 1.200 mm, panjang garpu: 2.400 mm, berat kosong: 7.850 kg, jenis penggerak: Diesel, lebar konstruksi: 1.450 mm, Forklift diesel Titik berat beban: 600 Tipe tiang: Duplex Kondisi teknis: baik Ukuran ban depan: 300-15/8.00 Ukuran ban belakang: 7.00-12/5.00 Gujdpovgh U Refx Agrjc Side shifter, katup ke-3, katup ke-4, lampu kerja depan, pemanas, kabin penuh, sertifikat CE, safety light,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2482758, Tahun pembuatan: 2021, kapasitas angkut: 5.000 kg, tinggi angkat: 3.000 mm, pengangkatan bebas: 150 mm, pusat beban: 500 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.940 mm, daya: 54,4 kW (73,96 hp), produsen motor: Kohler, tipe perpindahan gigi: hidrostatik, lebar kerangka garpu: 1.380 mm, panjang garpu: 1.200 mm, lebar garpu: 150 mm, ketebalan garpu: 55 mm, radius putar (dalam): 2.830 mm, ukuran ban depan: 300x15, ukuran ban belakang: 700-12, berat keseluruhan: 7.150 kg, tinggi total: 2.940 mm, panjang total: 3.000 mm, lebar total: 1.480 mm, warna: oranye, Perlengkapan: garpu palet, kabin, Technical Specifications - Year of manufacture: 2021 - Travel speed with/without load: 24 km/h - Cab roof made of plastic, with heater - Number of valves: 3 - Rated capacity/load: 5,000 kg Gedpfx Ageyqzlnoreuc - Load center distance: 500 mm - Load distance: 567 mm - Axle load, loaded (kg): 10,780 / 1,360 - Axle load, unloaded (kg): 3,300 / 4,060 - Track width (mm): 1,180 - Track width (mm): 1,190 - Mast/carriage tilt α/β (°): 6/12 - Seat height (related to SIP/stand height) (mm): 1,315 - Coupling height (mm): 380 - Aisle width for pallets 1000 x 1200 crosswise (Ast) (mm): 4,597 - Aisle width for pallets 800 x 1200 lengthwise (Ast) (mm): 4,797 - Turning radius (mm): 2,830 - Lift height: 3.00 m - Minimum turning point distance (mm): 900 - Travel speed loaded/unloaded (km/h): 22/24 - Lifting speed loaded/unloaded (m/s): 0.45/0.49 - Lowering speed loaded/unloaded (m/s): 0.38/0.26 - Drawbar pull loaded/unloaded (kN): 28/21 - Gradeability loaded/unloaded (%): 20/20 - Service brake: Mechanical/Hydraulic - Rated speed (l/min): 2,200 - Number of cylinders: 4 - Displacement (cm³): 2,482 - Emission stage according to EU Regulation 2016/1628: Stage III a - On-board voltage (V): 12 - Type of drive unit: Torque converter - Operating pressure for attachments (bar): 200 - Oil flow for attachments (L/min): 101 - Fuel tank capacity: 90 - Trailer coupling type: DIN 15170 pin

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2482768, Tahun pembuatan: 2021, kapasitas angkut: 4.000 kg, tinggi angkat: 3.000 mm, pengangkatan bebas: 150 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.940 mm, daya: 54,4 kW (73,96 hp), produsen motor: Kohler, tipe perpindahan gigi: hidrostatik, panjang garpu: 1.200 mm, ukuran ban depan: 300 x 15, ukuran ban belakang: 7.00-12, berat keseluruhan: 7.150 kg, tinggi total: 2.940 mm, panjang total: 3.000 mm, lebar total: 1.480 mm, warna: oranye, Perlengkapan: garpu palet, geser samping, kabin, lampu depan tambahan, pelindung depan, Technical data - Year of manufacture: 2021 - Travel speed with/without load: 24 km/h - Plastic cabin roof, heater - Number of valves: 3 - Rated lifting capacity/load: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm Gedpoyqyrmsfx Agrsuc - Axle load loaded kg: 10,780/1,360 - Axle load unloaded kg: 3,300/4,060 - Track width mm: 1,180 - Track width mm: 1,190 - Mast/Carriage tilt forward/backward α/β °: 6/12 - Seat height relative to SIP/stand height mm: 1,315 - Coupling height mm: 380 - Aisle width for pallets 1000 x 1200 (crosswise) Ast mm: 4,597 - Aisle width for pallets 800 x 1200 (lengthwise) Ast mm: 4,797 - Turning radius mm: 2,830 - Lifting height: 3.00 m - Minimum turning point distance mm: 900 - Travel speed loaded/unloaded km/h: 22/24 - Lifting speed loaded/unloaded m/s: 0.45/0.49 - Lowering speed loaded/unloaded m/s: 0.38/0.26 - Traction force loaded/unloaded kN: 28/21 - Gradeability loaded/unloaded %: 20/20 - Service brake: Mechanical/hydraulic - Rated engine speed l/min: 2,200 - Number of cylinders: 4 - Displacement cm³: 2,482 - Emission stage according to EU Regulation 2016/1628: Stage III a - On-board voltage V: 12 - Type of drive unit: Torque converter - Working pressure for attachments bar: 200 - Oil flow for attachments L/min: 101 - Fuel tank capacity: 90 - Tow coupling type: DIN 15170 pin - Fully functional, general signs of use

Kondisi: bekas, Fungsionalitas: belum diuji, Tahun pembuatan: 2011, jam operasional: 35.623 h, nomor mesin/kendaraan: A1225A0041 / L20, jenis kontrol: Kontrol CNC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Siemens, model controller: SINUMERIK 840D SL, jenis laser: Laser CO₂, produsen sumber laser: Trumpf TruFlow 3200, jam kerja laser: 35.623 h, daya laser: 3.200 W, panjang gelombang laser: 10.600 nm, ketebalan lembaran (maks.): 20 mm, ketebalan pelat baja (maks.): 20 mm, ketebalan maksimum lembaran baja tahan karat: 12 mm, tebal plat aluminium (maks.): 8 mm, panjang kerja: 3.000 mm, lebar kerja: 1.500 mm, tinggi kerja: 115 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 115 mm, kecepatan pemakanan sumbu X: 100 m/menit, laju pemakanan gandar Y: 200 m/menit, laju pemakanan sumbu Z: 80 m/menit, kecepatan pemotongan: 140 mm/menit, kecepatan pemposisian: 140 m/menit, akurasi pengulangan: 0,05 mm, berat benda kerja (maks.): 900 kg, daya: 3,2 kW (4,35 hp), tegangan masuk: 400 V, arus masuk: 100 A, frekuensi input: 50 Hz, jenis arus masuk: Arus searah (DC), jenis pendinginan: air, berat keseluruhan: 12.000 kg, panjang total: 6.500 mm, lebar total: 7.600 mm, tinggi total: 2.200 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Mesin ini hingga tahun 2023 berada dalam kontrak perawatan dengan Trumpf dan seluruh perawatan dilakukan secara eksklusif oleh Trumpf! Data teknis: -Daya laser: 3.200 Watt (3,2 kW) sumber laser CO2 (TruFlow 3200) -Jumlah jam operasi: Kontrol NC: 35.623 jam Resonator / Pompa 1: 34.258 jam Sinar aktif / Pompa 2: 10.155 jam -Area kerja (X/Y/Z): 3000mm x 1500mm x 115mm -Tebal plat maksimal: Baja konstruksi: hingga 20mm Baja tahan karat: hingga 12mm Aluminium: hingga 8mm -Kecepatan pengumpanan: Sumbu X: 3000mm/menit Sumbu Y: 1500mm/menit Sumbu Z: 115mm/menit -Kecepatan pemposisian X/Y: Godpfoxc E Rqsx Agreuc 140m/menit -Langkah terkecil yang dapat diprogram: 0,001mm Kontrol CNC: Siemens SINUMERIK 840D SL

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, jam operasional: 55 h, kapasitas angkut: 4.000 kg, tinggi angkat: 3.300 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 2.540 mm, panjang garpu: 1.200 mm, berat kosong: 7.010 kg, panjang total: 300 mm, jenis penggerak: Diesel, lebar konstruksi: 1.490 mm, Diesel forklift Load centre: 500 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: standard Technical condition: new Godpfx Agju Dcn Derjuc Front tyres type: superelastic Front tyres condition: 80 - 100% Rear tyres type: superelastic Rear tyres condition: 80 - 100% 3rd valve, 4th valve,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, jam operasional: 34.647 h, nomor mesin/kendaraan: A1220A1568, jenis laser: Laser CO₂, daya laser: 5.000 W, No reserve price – guaranteed sale to the highest bidder! Regularly serviced by Trumpf manufacturer LiftMaster Compact – compact and fast loading and unloading Bidding is binding and requires timely collection by 21.06.2025 TECHNICAL DETAILS X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm CNC control: Siemens Sinumerik 840D SL Workpiece Max. weight: 900 kg Speeds & Accuracy Simultaneous speed: 140 m/min Positioning deviation Pa: 0.05 mm Average positioning scatter Ps max: 0.03 mm Laser power Max. output: 5,000 W Wavelength: 10.6 µm Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminium: 12 mm LiftMaster Maximum sheet size loading/unloading: 3,000 x 1,500 mm Maximum stacking height loading: 90 mm Maximum stacking height unloading: 250 mm Gsdswpqmgepfx Agrjuc MACHINE DETAILS Length: 9,300 / 6,000 mm Width: 4,700 / 7,600 mm Height: 2,200 / 2,200 mm Weight: 12,000 kg Total electrical power consumption (complete system): 11 to 76 kW Input voltage: 400 V Input frequency: 50 Hz Operating hours: 74,617 h Laser on hours: 34,647 h Cutting hours: 14,901 h EQUIPMENT - FocusLine, NitroLine, PierceLine for flexible cutting processes - SprintLine, ContourLine, MicroWeld, FastLine, AdjustLine - Cutting head with LensLine technology (250 mm focal length) - Universal quick-change device for cutting heads (UTI) - Automated technology package for lens and nozzle automation - Nozzle changer - LensLine with automatic status control - ControlLine for precise control - Beam centring - BrightLine for optimal cutting quality - Cooling unit heating for consistent process conditions Note on collection - A forklift truck (min. 2 tonnes) with driver must be provided for removal. - Crane provision is the responsibility of the buyer.