Forklift listrik 4 roda

Still RX60-25

Kondisi: baru, Tahun pembuatan: 2023, kapasitas angkut: 2.500 kg, tinggi angkat: 4.670 mm, panjang garpu: 1.200 mm, panjang total: 3.680 mm, - Manufacturer model designation: RX 60-25 - Equipment type: Electric - Operation: Seated - Load centre: 500 mm - Load distance: 420 mm - Axle load front with load (kg): 6335 - Axle load rear with load (kg): 816 - Axle load front without load (kg): 2393 - Axle load rear without load (kg): 2258 - Tyres: Superelastic - Track width front (mm): 992 - Track width rear (mm): 900 - Mast/carriage tilt forward (°): 3 - Mast/carriage tilt backward (°): 9 - Seat height/standing height (SRP) (mm): 1139 - Coupling height (mm): 485/365 - Aisle width with pallet 1000 x 1200 across forks (mm): 3654 - Aisle width with pallet 800 x 1200 lengthways (mm): 3852 - Turning radius (mm): 2032 - Minimum pivot point (mm): 539 - Travel speed with load (km/h): 19 - Travel speed without load (km/h): 20 - Lifting speed with load (m/s): 0.46 - Lifting speed without load (m/s): 0.55 - Lowering speed with load (m/s): 0.52 - Lowering speed without load (m/s): 0.45 - Drawbar pull with load (N): 8000 - Drawbar pull without load (N): 8110 - Maximum drawbar pull with load (N): 17440 - Maximum drawbar pull without load (N): 17220 - Gradeability with load (%): 21.3 - Gradeability without load (%): 29.5 - Maximum gradeability with load (%): 25.5 - Maximum gradeability without load (%): 29.7 - Acceleration time with load (s): 4.5 - Acceleration time without load (s): 4.2 - Service brake: electric/mechanical - Drive motor output S2 60 min (kW): 15 - Lift motor output at 15% duty cycle (kW): 16.3 Dujdpfx Aszb Rlxjirsu - Battery voltage (V): 80 - Operating pressure for attachments (bar): 250 - Oil flow for attachments (l/min): 30

Kondisi: baik (bekas), Tahun pembuatan: 2000, Weinig High Mech E6 Zuführung + A5 Ausförderung + Stapelanlage 1. Weinig Paket-Zuführ-Rollenbahn. 2. Weinig Paket-Kipper. 3. Weinig Flachketten-Quereinzug mit Einzelbretteinzug. 4. Weinig Ausschleus-Sortiereinheit mit Rollenbahnen. 5. Weinig EM814 Hobelmaschinen-Zuführung mit Flachketteneinzug. 6. Weinig Ausführung 3m Förderband-Beschleuniger. 7. Rollenbahn mit Quereinzug-Kettenausschiebern. 8. Weinig Quereinzug-Pufferförderband. Djdpfx Aowgbw Rjirsuu 9. Weinig Flachketten-Stapler mit Scherenhub-Rollenbahn. 10. Weinig Paket-Auslauf-Rollenbahnen. Optional ist ein zusätzliches Weinig Bündelungssystem erhältlich.

Kondisi: baik (bekas), Tahun pembuatan: 2019, jam operasional: 5.921 h, kapasitas angkut: 2.500 kg, tinggi angkat: 6.050 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.750 mm, berat kosong: 5.000 kg, jarak tempuh: 5.921 km, Forklift TRIPLEX merek STILL, tahun pembuatan 2019. Kapasitas 2.500 kg; tinggi angkat 6.050 mm; tinggi jalan masuk 2.750 mm. Dilengkapi FREELIFT, Sideshift, dan Fork Spreader; garpu sepanjang 1.200 mm. Hanya 5.921 jam pemakaian. Baterai tahun 2024, dilengkapi dengan charger eksternal dan sistem pengisian otomatis. Lihat video di YouTube. Dedpfx Aiozaa Dborouu

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 3.016 h, kapasitas angkut: 2.500 kg, tinggi angkat: 4.440 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.125 mm, jarak tempuh: 3.016 km, SEGERA DATANG Forklift TRIPLEX merek STILL Tahun produksi: 2020 Kapasitas: 2.500 kg Tinggi angkat: 4.440 mm TIANG KONTAINER 2,25 mm Dilengkapi dengan FREELIFT Terdapat SIDESHIFT Gigi fork 1.200 mm HANYA 3.016 jam pemakaian Dedpezaazmsfx Airsuu Baterai dilengkapi dengan charger eksternal dan sistem pengisian otomatis Video menyusul

Kondisi: bekas, Technical data: Track width: 400 mm Max cutting height: 150 mm Max saw blade diameter: 450 mm Min workpiece length: 700 mm Stepless feed adjustment Automatic lubrication system Anti-kickback protection Extraction port diameter: 300 mm Emergency stop switch Power supply: 380 V Main motor power: 55 kW Overall dimensions: Length: 2000 mm Width: 2120 mm Dsdpfx Aoh Tkbkoirsuu Height: 1860 mm

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 12.155 h, tinggi angkat: 4.930 mm, pengangkatan bebas: 1.680 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, panjang garpu: 1.000 mm, lebar garpu: 1.030 mm, tinggi total: 2.300 mm, panjang total: 2.320 mm, lebar total: 1.190 mm, warna: perak, en Dodpsy S Rr Iofx Airouu

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 6.118 h, kapasitas angkut: 2.500 kg, tinggi angkat: 7.780 mm, pengangkatan bebas: 1.500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 3.200 mm, jenis penggerak: Elektro, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Duodeu D Rkajpfx Airou Front tyres type: superelastic Front tyres condition: 20 - 40% Rear tyres type: superelastic Rear tyres condition: 20 - 40% Side shifter, 3rd valve, rear working light, front working light,

Kondisi: bekas, Tahun pembuatan: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Control: K2 Basic 7" touchscreen KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm; spindle 4,500 up to 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed carriage motorized positioning - Additional motorized adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 - 230 mm Working height (with tool diameter 125 mm): 10 - 160 mm (tool diameter up to 163 mm) 10 - 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Workpiece machining depends on the following operating parameters: Material, wood moisture, tooling, cutting depth diameter, and feed speed. Parameter adjustments may be necessary as required. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rebate device: diameter difference 20 – 25 mm to planing head Important: unit cannot be operated without a jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick-release nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Tableplate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Tableplate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Dodpfswgwmnox Airouu Tool clamping system: quick-release nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inv...

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 515065G00537, Tahun pembuatan: 2012, jam operasional: 5.350 h, kapasitas angkut: 2.500 kg, tinggi angkat: 5.020 mm, pengangkatan bebas: 1.770 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.280 mm, lebar kerangka garpu: 980 mm, panjang garpu: 1.200 mm, berat kosong: 4.940 kg, panjang total: 2.270 mm, jenis penggerak: Elektro, lebar konstruksi: 1.200 mm, elektro-4-rad-stapler-515065g00537 Djdpfxsy Scras Airouu

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 1.686 h, kapasitas angkut: 2.500 kg, tinggi angkat: 5.180 mm, pengangkatan bebas: 1.750 mm, pusat beban: 600 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.380 mm, kapasitas baterai: 560 Ah, tegangan baterai: 80 V, Tersertifikasi DGUV hingga: 06/2027, panjang garpu: 1.200 mm, Perlengkapan: Pemeriksaan keselamatan UVV, Penandaan CE, geser samping, kabin, pencahayaan, riwayat servis lengkap, 1 Dodpjy Rh Evjfx Aireuu

Kondisi: bekas, Tahun pembuatan: 2021, Number of spindles: 5 units Working width: 230 mm Planing height: 160 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control system: K2 Basic 7" touch panel KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE Dedewgwmhspfx Airouu ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency controlled 4,000 – 6,000 rpm - Width and height positioned by motor: left spindle – radial upper spindle – axial - Feed beam positioned by motor DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125 – 163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Minimum workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of workpieces depends on the following operational parameters: Material, wood moisture, tools, depth of cut, and feed speed. Adjustments to operating parameters may be necessary, if applicable. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to the planing head Important: System cannot be operated without the jointing rabbet cutter Extraction port D = 125 mm Tool clamping system: Quick-clamp nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-cont...

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, jam operasional: 1.459 h, kapasitas angkut: 2.500 kg, tinggi angkat: 3.690 mm, pengangkatan bebas: 1.725 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 2.475 mm, lebar kerangka garpu: 1.040 mm, panjang garpu: 1.200 mm, jenis penggerak: Elektro, elektro-4-rad-stapler-iso2-2020 Dodpfx Asy S Ha Ujirsuu

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 14.014 h, Fuel type: Electric Color: Grey Unladen weight: 5,200 kg Dimensions (L x W x H): 232 x 119 x 317 cm Lifting capacity: 2,500 kg Lift height: 739 cm Free lift: 206 cm Fork dimensions: 2,200 x 950 mm - Year of manufacture: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: 516345F00709 Dsdpfeycvvxjx Airsuu - Operating hours: 14,014 - Lifting capacity: 2,500 kg - Lift height: 7,390 mm - Clearance height: 3,175 mm - Free lift: 2,060 mm - Fork length: 2,200 mm - Maximum fork width: 950 mm - Minimum fork width: 240 mm - Number of wheels: 4 wheels - Attachment: Sideshift - Options: Free lift, Work lights, Non-marking tires, Full cab - Mast: Triplex - Drive: Electric - Make/Type (battery): PzS 620Ah - Year of battery: 2015 - Battery capacity: 620Ah - Battery voltage: 80V - Transport dimensions: 2,328mm x 1,199mm x 3,175mm (l x w x h) - Transport weight [kg]: 5,200 kg - Transport units [pcs.]: 1 Financial Information VAT: The stated price is net, excluding VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for any equipment from the industrial sector Tess van den Boom

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, jam operasional: 1.518 h, kapasitas angkut: 2.500 kg, tinggi angkat: 4.440 mm, pengangkatan bebas: 1.500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.210 mm, jenis penggerak: Elektro, Electric 4-wheel forklift Load centre: 500 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Tyres front type: Superelastic Tyres rear type: Superelastic Battery voltage: 80V Battery capacity: 620Ah Djderadizjpfx Airjuu Battery year: 2017 Description: Sideshift, 3rd valve, rear work lights, front work lights, half cabin, road legal (StVZO), LED lighting,

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 2.500 kg, tinggi angkat: 4.670 mm, panjang garpu: 1.200 mm, panjang total: 3.650 mm, - Equipment type: Electric - Operation: Seated - Load center: 500 mm - Load distance: 420 mm - Axle load front with load (kg): 6,335 - Axle load rear with load (kg): 816 - Axle load front without load (kg): 2,393 - Axle load rear without load (kg): 2,258 - Tyres: Superelastic - Track width front (mm): 992 - Track width rear (mm): 900 - Mast/carriage tilt, forward (°): 3 - Mast/carriage tilt, backward (°): 9 - Seat/platform height (SRP) (mm): 1,139 - Coupling height (mm): 485/365 - Working aisle width with pallet 1000 x 1200 crossways (mm): 3,654 - Working aisle width with pallet 800 x 1200 lengthways (mm): 3,852 - Turning radius (mm): 2,032 - Smallest pivot point (mm): 539 - Travel speed with load (km/h): 19 - Travel speed without load (km/h): 20 - Lifting speed with load (m/s): 0.46 - Lifting speed without load (m/s): 0.55 - Lowering speed with load (m/s): 0.52 - Lowering speed without load (m/s): 0.45 - Traction with load (N): 8,000 - Traction without load (N): 8,110 - Max. traction with load (N): 17,440 - Max. traction without load (N): 17,220 - Gradeability with load (%): 21.3 - Gradeability without load (%): 29.5 - Max. gradeability with load (%): 25.5 - Max. gradeability without load (%): 29.7 - Acceleration time with load (s): 4.5 - Acceleration time without load (s): 4.2 - Service brake: Electric/mechanical - Drive motor, output S2 60 min (kW): 15 - Lift motor, output at 15% duty cycle (kW): 16.3 Dedpfsy E Ud Iox Airjuu - Battery voltage (V): 80 - Hydraulic pressure for attachments (bar): 250 - Oil flow for attachments (l/min): 30