Forklift

Still RX60-50

Kondisi: baru, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 4.710 mm, panjang garpu: 1.600 mm, panjang total: 4.470 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 Ksdpfsy E Ubtox Ai Tsnb - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation Ksdpfx Ajng Amkoi Tonb • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 4.700 mm, panjang garpu: 1.600 mm, panjang total: 4.500 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm Knedjzluw Espfx Ai Teb - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: baru, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 4.700 mm, panjang garpu: 1.600 mm, panjang total: 4.470 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 Kedpfx Aisxd Ep Nj Tjnb - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: baru, Table length 1300 mm Table width 800 mm Kjdpefrztxofx Ai Tonb Lifting height 1010 mm Load capacity 1000 kg Minimum lifting height 190 mm Connection voltage 380 V Total power requirement 0.75 kW Machine weight approx. 0.22 t Space requirement approx. 1.3 x 0.8 x 0.2 m The hydraulic lift tables are electrically powered and operated. They feature a safety contact strip for safe lowering operation. Versatile application in workshops, assembly departments, loading bays, etc.

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 4.700 mm, panjang garpu: 1.600 mm, panjang total: 4.470 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 Kjdpfxsxd E Dmj Ai Tsnb - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 4.700 mm, panjang garpu: 1.600 mm, panjang total: 4.470 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 Knodpfxey E Udne Ai Tsb - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, berat kosong: 2.400 kg, Mesin gergaji compact dengan pemasukan sentralisasi mekanis, motor listrik 2x75 kW dan 2x90 kW, mesin dapat dilengkapi dengan blok edging dan panel kontrol listrik dengan inverter frekuensi DETAIL TEKNIS Diameter atas: 80-230 mm Diameter batang maksimum: 350 mm Panjang batang minimum: 2,4 m Tinggi balok pada Chipper Canter: 60-232 mm Lebar balok pada Chipper Canter: 70-210 mm Kodpfx Aoxfrmwoi Tenb Kecepatan lini: 70-150 m/menit Panjang serpihan: 20-30 mm

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 6.040 mm, panjang garpu: 1.600 mm, panjang total: 5.120 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 Knedpfx Asy Aznbei Tsb - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, jam operasional: 10.009 h, kapasitas angkut: 5.000 kg, tinggi angkat: 5.440 mm, pengangkatan bebas: 1.650 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.560 mm, lebar kerangka garpu: 1.300 mm, panjang garpu: 1.400 mm, berat kosong: 8.194 kg, panjang total: 2.900 mm, jenis penggerak: Elektro, lebar konstruksi: 1.400 mm, Electric 4-wheel forklift Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 355/45-15 non-marking Rear tires type: Superelastic Rear tires size: 200/75-9 non-marking Battery voltage: 80V Battery capacity: 840Ah Battery year of manufacture: 2009 Description: In addition to this Still model, we have approximately 200 heavy-duty forklifts, compact forklifts, lift trucks & side loaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Lease-purchase and financing under favorable terms are always available. We are also happy to purchase your used machine outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this RX60-50. P.S.: Our master forklift workshop specializes in repair, servicing, refurbishment, and custom builds for forklifts from 8 tons upward. We can also offer your vehicle on a consignment basis at our facility. Knjdsxn U Icepfx Ai Tjb Side shifter, Full free lift,

Kondisi: siap digunakan (bekas), Manual feeding of the crown caps into the chute; the machine places the crown cap onto the bottle and presses it on. Knodpfsfh Dlrsx Ai Tob

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 4.990 kg, tinggi angkat: 6.055 mm, panjang total: 4.590 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 Kedpsztgdtjfx Ai Tonb - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: bekas, Tahun pembuatan: 2019, kapasitas angkut: 5.000 kg, tinggi angkat: 6.040 mm, panjang total: 4.580 mm, - Seat operation (operator seat) - Load capacity: 5.0 t - Load center distance: 535 mm - Axle load front with load: 11,547 kg - Axle load rear with load: 1,154 kg - Axle load front without load: 3,845 kg - Axle load rear without load: 3,866 kg - Tyres: SE (Super Elastic) - Number of wheels front (x = driven): 2x - Number of wheels rear (x = driven): 2 - Front track width: 1,104 mm - Rear track width: 920 mm - Mast/carriage tilt forward: 3° - Mast/carriage tilt backward: 6° Knjdpfezrp Husx Ai Tob - Coupling height: 546/421 mm - Aisle width for pallet 1000 x 1200 crosswise: 4,284 mm - Aisle width for pallet 800 x 1200 lengthwise: [value missing] - Turning radius: 2,549 mm - Smallest pivot point: 638 mm - Travel speed with load: 18 km/h - Travel speed without load: 19 km/h - Lift speed with load: 0.31 m/s - Lift speed without load: 0.44 m/s - Lowering speed with load: 0.55 m/s - Lowering speed without load: 0.46 m/s - Drawbar pull with load: 3,600 N - Drawbar pull without load: 4,400 N - Maximum drawbar pull with load: 15,670 N - Maximum drawbar pull without load: 16,090 N - Acceleration with load: 5.4 s - Acceleration without load: 4.7 s - Service brake: electric/mechanical - Drive motor output KB 60 min: 15 kW - Battery voltage: 80 V - Energy consumption 60 VDI cycles/hour: 12.1 kWh/h - Working pressure for attachments: 250 bar - Oil flow for attachments: 30 l/min - Sound level at driver's ear: dB (A) [value missing]

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Mesin Edgebander BIESSE Akron 1440A Kedpfx Aeyh A I Asi Tenb Ketersediaan: April/Mei 2026 Sertifikat CE Tahun produksi: 2017 Mesin dapat diperiksa sebelum pembelian

Kondisi: bekas, nomor mesin/kendaraan: 516329G00447, Tahun pembuatan: 2016, jam operasional: 11.358 h, kapasitas angkut: 5.000 kg, tinggi angkat: 5.400 mm, tipe tiang: triplex, panjang garpu: 2.300 mm, Perlengkapan: Pemeriksaan keselamatan UVV, Tidak ada harga minimum – penjualan dijamin dengan harga penawaran tertinggi! RINCIAN TEKNIS Kapasitas angkut: 5.000 kg Ketinggian pengangkatan: 5.400 mm Panjang garpu: 2.300 mm Knjdpfxjz Dfrbs Ai Tjb RINCIAN MESIN Jenis tiang: Triplex Jenis penggerak: Elektrik Tegangan baterai: 80 V Kapasitas baterai: 840 Ah Tahun pembuatan baterai: 2017 Tegangan baterai saat tidak digunakan: 85,3 V Layanan berlaku hingga: 07/2027 UVV berlaku hingga: 07/2027 Dimensi & Berat Dimensi (P x L x T): 5.200 x 1.350 x 3.000 mm Berat sendiri: 8.300 kg Jam operasi menurut tampilan: 11.358 jam PERALATAN Pengangkatan bebas penuh Katup hidrolik ke-3 dan ke-4 Penggeser samping Pengatur garpu hidrolik Kabin penuh dengan pemanas dan wiper Lampu kerja LED di bagian depan Lampu kerja LED di bagian belakang Pencahayaan StVZO dengan lampu sein Lampu keselamatan di bagian belakang Kursi yang nyaman dengan penyangga punggung dan pemanas kursi Pengisi daya baterai Hawker Enersys Semua ukuran adalah perkiraan yang dibulatkan. Tidak ada jaminan atas kesalahan penulisan dan pengukuran. Ketentuan pengambilan: Pemuatan samping hingga 6 ton dapat dilakukan dengan forklift besar di lokasi. Pemuatan dilakukan atas risiko sendiri. Pemuatan dari belakang melalui landasan miring dengan tinggi truk 100–150 cm, hingga 15 ton dan hingga lebar 230 cm. Pengambilan hanya dapat dilakukan setelah menerima konfirmasi pembayaran melalui email. Pengambilan tanpa pemberitahuan sebelumnya dari hari Senin hingga Jumat antara pukul 07:00 dan 16:00. Jika pengambilan tidak dilakukan tepat waktu, akan dikenakan biaya penyimpanan sebesar 20 € per mesin per hari. Biaya penyimpanan yang belum dibayar harus diselesaikan sepenuhnya sebelum pengambilan. Nomor lot: 558