Pelat penjepit alur-T STOLLE - DTR

Stolle DTR

Kondisi: baik (bekas), Tahun pembuatan: 1990, berat keseluruhan: 3.900 kg, tinggi total: 300 mm, panjang total: 3.520 mm, lebar total: 2.000 mm, tinggi pelat: 300 mm, Panjang: 3520 mm Lebar: 2000 mm Tinggi: 300 mm Itsdpfx Anozw Ezrskjn Jumlah alur-T: 8 Jarak alur-T / interval: 250 mm Ukuran alur-T: 28 mm Berat per pelat, kira-kira: 3900 kg Jumlah bagian yang cocok: 1 Panjang: 3520 mm Lebar: 2000 mm Tinggi: 300 mm Berat: 3900 kg Harap diperhatikan: Informasi di halaman ini telah kami berikan berdasarkan pengetahuan dan keyakinan terbaik kami, dan sedapat mungkin, diperoleh dari produsen. Informasi ini diberikan dengan itikad baik, tetapi keakuratannya tidak dapat dijamin. Oleh karena itu, informasi ini tidak dapat dianggap sebagai representasi atau ketentuan kontrak. Kami menyarankan Anda untuk memeriksa semua detail penting.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Fixed steady rest for TR-115 Poręba lathe, range 150-450 mm – NEW! Also available for Poręba lathes of types TR, TPK, TCG, etc. Support blocks, lathe holders, tool holders, and other spare parts for Polish POREBA lathes are available from our warehouse in Central Poland. We ship worldwide. Itjdpfx Aour Ig Hjnkon

Kondisi: baik (bekas), Pelat pengikat dengan alur-T dan meja silang, bidang pelat, meja las, meja pengelasan, mesin pengebor pelat, pelat dengan alur-T, pengganti palet -Pelat pengikat: dilengkapi dengan satu unit kereta dengan alat penjepit -Jumlah: 1 unit (satu pelat lagi masih tersedia, ID 21154) -Dimensi kereta: 1450/810/T1120 mm -Berat: 490 kg -Lebar: 1465 mm Isdped Ehfmsfx Ankotn -Panjang: 4930 mm -Tinggi kerja: 850 mm -Ketebalan pelat: 35 mm -Tinggi pelat: 300 mm -Pelat dengan: tulang penyangga -Lebar alur: 52 mm -Jarak antar alur: 292 mm -Dimensi pengangkutan: 4930/1670/T850 mm -Berat: 5900 kg

Kondisi: bekas, Plate width 2500 mm Plate depth 5100 mm Plate height 400 mm Weight approx. 9 t Required space approx. 2.5 x 5.1 x 0.40 m T-slot dimensions: 36 x 60 mm - Height: 61 mm Ijdohpva Dopfx Ankotn Number of slots: 5 Slot spacing: 460 mm Edge distance: 220 mm Slot size: 36 mm

Kondisi: bekas, Fungsionalitas: belum diuji, Tahun pembuatan: 1995, Peralatan bantu pembengkokan 6000D: Ø 6 hingga 60 x 4 mm Penarikan mandrel otomatis Itjdpfx Aozlg Ayenken Perangkat puntir manual

Kondisi: bekas, Tahun pembuatan: 1990, Panjang 8000 mm Lebar 3000 mm Jumlah 1 Ketebalan pelat 400 mm Itodpfxsv Ey Nqs Ankon Berat mesin sekitar 14 ton Ruang yang dibutuhkan sekitar 8 x 3 x 0,4 m Pelat tersebut memiliki 10 alur memanjang, masing-masing selebar 32 mm.

Kondisi: baru, Bandsaw HOLZKRAFT HBS 433 - Demonstration Unit - Upper and lower saw blade guides, Quick-release mechanism via eccentric lever ----- Technical Data ----- Wheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with fence: 370 mm Max. cutting width without fence: 410 mm Max. blade length: 3,345 mm Table size: 610 x 431 mm Table tilt: -10° to +45° Motor 400 V: 1.5 kW Extraction port diameter: 2 x 120 mm Cutting speed: 900 / 450 m/min Dimensions (LxWxH): 768 x 512 x 2,048 mm Weight: 130 kg Scope of delivery: 3 bandsaw blades 6 / 16 / 25 mm Itjdpeu R S Akjfx Anken - New demonstration unit -

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 5.600 mm, panjang total: 11.200 mm, lebar total: 5.100 mm, jenis arus masuk: tiga fasa, masa garansi: 24 bulan, tinggi dalam: 4.970 mm, panjang dalam: 11.000 mm, suhu: 80 °C, lebar dalam: 5.000 mm, kebutuhan udara: 52.000 m³/jam, tegangan masuk: 380 V, kapasitas pemanasan: 250 kW (339,91 hp), daya: 45 kW (61,18 hp), bahan bakar: gas petroleum cair (LPG), frekuensi input: 50 Hz, konsumsi energi: 45 kWh, ketebalan isolasi: 50 mm, daya nominal: 250 kW (339,91 hp), ketebalan pelat baja (maks.): 2 mm, Perlengkapan: pencahayaan, * Air Treatment Unit: The air treatment unit is a recirculation system that supplies the booth with filtered fresh air and exhausts used air during the painting process. It heats the air to 60°C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before returning it to the booth. The air is heated by a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air undergoes dual filtration (through front and ceiling filters) before entering the booth. The contaminated air is also filtered twice (via inlet and outlet filters) before leaving the exhaust unit. Air treatment units are insulated like the side panels to minimize heat loss and are protected against potential vibrations and noise by rubber seals on the covers. The exhaust air is regulated by a damper in the air outlet duct, which helps to control the internal pressure of the booth. *PRINCIPLE OF OPERATION OF THE BOOTH: The processes in the booth are controlled via an operator panel that manages the following steps: *PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passes through the front filters before entering the plenum at ambient temperature. The air is then discharged through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before being released. *FLASH-OFF PROCESS: After painting, the booth continues to operate for about 15 minutes to expel residual solvents and thinners. During this stage, fresh outside air circulates within the booth. Itjdpfx Aswzl Hxonken *DRYING PROCESS: In this phase, 80% of the air circulating through the booth is heated to 60°C and delivered into the booth via a plenum. As 20% of the solvents are released during drying, this solvent-laden air is exhausted. Industrial coatings are generally dried at 60°C, but the booth temperature can be adjusted as needed via the operator panel. *COOL-DOWN PROCESS: After the 30-minute drying process, the coil is deactivated via the operator panel, the pneumatic damper closes, and the exhaust system restarts. During the 5-minute cool-down period, fresh outside air circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of the machines and equipment within the booth. The control panel is made of durable galvanized sheet metal and steel profiles, fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel includes essential components such as contact breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices. • Electrical wiring is designed to allow the booth to be relocated if necessary. • Operating equipment uses 380 V 50 Hz, while control equipment uses 220 V.

Kondisi: bekas, Plate width 3000 mm Plate depth 2000 mm Plate height 230 mm Itjdpfx Ansud Iw Uokjn Approx. machine weight / t Clamping plate Dimensions: 3000 x 2000 x 230 mm T-slot dimensions: 42 x 72 x 74 (H) The images are for illustration purposes. Additional photos will follow.

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Sistem penyimpanan kaca semi-otomatis berukuran ringkas 25 posisi Ukuran kaca maksimum: 3210 x 6000 mm Kapasitas beban laci: 6000 kg Kapasitas beban total: 150.000 kg (150 ton) Dimensi total lantai: P 6100 x L 9200 x T 3050 mm Lebar area pemuatan: 24 buah x 170 mm + 1 buah x 410 mm. Iodpfezdylxjx Anketn Kondisi sangat baik dan bersih Berfungsi dengan baik, telah diuji Dijual apa adanya Lihat video