Mesin pengasah dengan otomatisasi pemuatan

Sunnen KGM-5000 NTG

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 203214, berat benda kerja (maks.): 2 kg, kecepatan spindel (maks.): 3.700 rpm, diameter benda kerja (maks.): 150 mm, berat kosong: 1.579 kg, TECHNICAL DETAILS Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2 kg Spindle speed range: 250 to 3,700 rpm Standard speed range: 20 to 1,000 rpm Stroke speed range: 33 to 500 strokes/min Tools Krossgrinding tools: 5.46 to 32 mm TurboHone tools: 3.81 to 32 mm Connecting rod tools: 53.8 to 63.8 mm Larger tools: 25.4 to 101.6 mm MACHINE DETAILS Coolant system Pump motor power: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l Air pressure requirement: 566 l/min at 4.48 bar Recommended air pressure: 5.52 bar Temperature range: 0 to 35 °C Noise emissions: < 71 dB (A) continuous, < 75 dB (A) peak Dimensions & Weight Dimensions (L x W x H): 2,946 x 2,971 x 1,829 mm Stationary weight: 1,579 kg Installation area requirement: Minimum thickness 150 mm EQUIPMENT Kodpfjxxkfxex Ac Hjdh Automatic setup (spindle speed, stroke speed, stroke length, feed rate, spark-out) Automatic finish machining Machine operating modes: Automatic, Manual Series production Single-piece production Optional clamping

Kondisi: bekas, Tahun pembuatan: 2008, Used drilling center by CMA Type: TRD 40 CN 9000 Table length: 9000 mm Max. capacity: 40 mm Automatic tool changer Year of manufacture: 2008 Kedewc Ndwspfx Ac Hjdh

Tahun pembuatan: 1990, Kondisi: baik (bekas), CNC 4th axis Make: NIKKEN Type: CNC-200, Year: 1990 with tailstock and base plate. Kjdpfx Ajgabu Uoc Hjdh

Kondisi: bekas, Tahun pembuatan: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D ShopTurn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Driven tool speed: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis Equipment: - 3-jaw chuck Kitagawa Ø 250 mm Kedpfx Acjww Nazo Hedh - Chip conveyor - Parts catcher with box in door - Signal lamp - 2 + 2 driven tool holders - Various static tool holders - Flat guideways - Tool measurement arm - Programmable tailstock - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping system

Kondisi: bekas, tinggi total: 1.600 mm, panjang total: 5.000 mm, lebar total: 1.600 mm, 2 Kdedpfxswnitie Ac Hsh

Kondisi: bekas, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 4.500 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, X-AXIS TRAVEL 6000 MM Y-AXIS TRAVEL 1800 MM Z-AXIS TRAVEL 1000 MM WORKTABLE 7300 X 1090 X H 900 MM SPINDLE NOSE MOUNT ISO 50 SPINDLE SPEED 0 - 4500 RPM AUTOMATIC INDEXING HEAD 2.5° X 2.5° CNC SELCA 3045 PD Kedpov H D Exsfx Ac Hsdh EXTERNAL AND INTERNAL HIGH-PRESSURE COOLING TOOL CHANGER WITH 60 POSITIONS NO. 01 CNC-CONTROLLED DIVIDING HEAD

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Kodsrz Nflepfx Ac Hedh Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Gebrauchte Haeger 412 Einpressmaschine Blech-Einlets, Bolzen & Muttern – Selbstsichernd zu verkaufen. Inklusive Werkzeug und J-förmigem Unterwerkzeug. Kdodswbhipopfx Ac Hoh

Kondisi: baru, Number of drawers: 8 pcs. Dimensions (L x W x H): 880 x 580 x 1000 mm Net weight: 156 kg Load capacity: 100 kg per drawer Kdjdpfx Aceu Imf Is Hjh Robust tool cabinet with 8 lockable drawers. Drawer configuration: 2 x 75 mm, 4 x 100 mm, 1 x 150 mm, and 1 x 200 mm heights Usable internal dimensions: 770 x 450 mm. Maximum load per drawer: 100 kg! Contents: - 32 x bins 75 x 75 mm - 16 x bins 75 x 150 mm - 8 x bins 150 x 150 mm - 12 x long dividers - 32 x short dividers - 1 x stacking sheet

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 39.256 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 780 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, tinggi total: 2.800 mm, panjang total: 7.000 mm, lebar total: 7.000 mm, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 12.000 kg, For sale: Deckel Maho DMC 60 T Machining Centre The machine is in good condition and immediately ready for operation. Technical specifications: - Year of manufacture: 2005 - Operating hours: 39,256 - Power-on hours: 72,107 - X travel: 780 mm - Y travel: 560 mm - Z travel: 560 mm Ksdpfewtft Nex Ac Hsdh - Control: Heidenhain iTNC 530 - Main spindle speed range: 20 - 12,000 rpm - Main spindle drive power: 28 / 19 kW - Max. torque: 125 Nm - Tool holder: SK 40 - B-axis infinitely tiltable: 150° (-120/+30)° - Number of pallets: 2 - Pallet size: 630 x 500 mm - Max. load: 400 kg - Table rotation speed: max. 30 rpm - Number of tool positions: 120 - Max. tool diameter: 80 mm - Max. tool diameter with empty adjacent pocket: 160 mm - Max. tool length: 315 mm - Max. tool weight: 8 kg - Rapid traverse (X/Y/Z): 50 m/min - Feed speed: 20 - 15,000 mm/min - Total power requirement: 64.2 kVA - Machine weight: approx. 12.0 t - Space requirements: approx. 7.0 x 7.0 x 2.8 m Included in the offer: - Documentation - Chip conveyor - Coolant system - High-pressure coolant 40 bar IKZ - Paper band filter - 2-position pallet changer - Tool breakage control Accessories such as clamping devices or tool holders are not included. Transport and loading, within Europe, can be arranged on request at an additional charge. Prices are subject to VAT. Viewing possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.