Sistem perawatan permukaan lapisan

Surfin Technology TRP501

Kondisi: bekas, Tahun pembuatan: 2007, Turning diameter: 140 mm Turning length: 615 mm Control: C200-4D Spindle bore: 65 mm Spindle speed: 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides: 1, 2, and 3 X-axis travel: 110 mm Z-axis travel: 360 mm Y-axis travel: 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction: 150 mm Slide travel Z-direction: 600 mm Iasdpfjwzynqex Afier Spindle speed: 5,000 rpm B-axis (correction axis): +/- 1° Tool turret - number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis: 0.001° Total power requirement: 61 kW Machine weight approx.: 6.5 t Space requirement approx.: 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with lengths from 500 to 3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading device BREUNING ILS-REX-7208, year 2007

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. Iaedpfsfz U S Ejx Afijr The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: Ijdpocc D Ddofx Afisar This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 1.000 h, de Ijdoxpiw Uepfx Afijar

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 88 kW (119,65 hp), suhu: 220 °C, kapasitas pemanasan: 30 kW (40,79 hp), tinggi benda kerja (maks.): 1.500 mm, panjang benda kerja (maks.): 500 mm, bahan isolasi: Steinwolle, ketebalan isolasi: 150 mm, lebar benda kerja (maks.): 500 mm, Scope of supply: 1. Chemical pre-treatment by spraying (in step-by-step operation) 2. Dryer 3. Powder coating system 4. Powder curing oven 5. Semi-automatic conveyor system 6. Electrical control system Building / Installation area Maximum system footprint: 12,000 x 6,500 mm Floor type: Industrial floor Workpiece sizes Max. part dimensions: L = 500 mm, H = 1,500 mm, W = 500 mm Parts spectrum: Steel Conveying technology P&F (Power & Free): Chain conveyor, step-by-step operation, semi-automatic Pre-treatment Chemical Iajdpfsulwg Njx Afisr Energy supply Electricity: Supplied on-site (max. 88 kW) Gas: Supplied on-site Compressed air: Supplied on-site Water: Supplied on-site Calculation System type: Step-by-step line Conveying speed: 3.2 metres/min Step length: L = 1,600 mm Time for conveying movement: Tm = 1.6 metres : 3.2 metres/min = 0.5 min Dwell time per step: Ts = 8.5–12 min Total cycle time: Tt = Tm + Ts = 9–12.5 min Electric power: Total capacity 88 kW Min. average consumption: 60 kWh Max. average consumption: 70 kWh

Kondisi: baik (bekas), Tahun pembuatan: 2006, de-1 Iedpfjxtxi Iex Afiear

Kondisi: baru, The perfect coating for long-lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is essential for the powder to bond effectively with the substrate and to achieve a robust, long-lasting finish. Components of a Powder Coating System A powder coating plant typically consists of various components and equipment required for the application and curing of powder coatings. Spray Booth and Application Area The booth provides a clean environment for the application process and ensures even distribution of the powder. Powder Coating Gun A powder coating gun is used to apply the powder coating material to the workpiece. Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to convey the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before powder coating application. This includes processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimum adhesion and coating durability. Curing Oven A curing oven is an essential part of a powder coating system. It is used to heat the coated substrate to the proper temperature, allowing the powder coating to melt, flow, and harden into a durable surface. The oven typically features a conveyor system or racks to transport coated parts through the oven chamber. Extraction System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents powder particle accumulation in the air. Looking for a powder coating solution? Are you searching for a tailored powder coating system? We specialize in delivering custom powder coating solutions tailored to your specific requirements. Whether you have particular color specifications, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results. Contact us today to discuss your requirements and let us design a bespoke powder coating solution for you. Iodpfjun Sd Ujx Afioar Get in touch with us today!

Kondisi: sangat baik (bekas), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with its own pump) No. 4 vertical support columns for the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley, to which horizontal arms are connected No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 floor rollers for feeding panel stacks into the Loader No. 1 motorized roller table that feeds panels to the Unloader, also equipped with several crosswise motorized conveyor belts (at 90°). Approx. dimensions: 7232 mm. Iaodpfx Aod Rg Dpsfijr Separate electrical and control panel OMRON electronic control Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Min./max. panel thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 7.003 h, jenis bahan bakar: diesel, Perlengkapan: kabin, pelindung kepala,

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang total: 30.000 mm, tinggi total: 4.300 mm, lebar total: 6.500 mm, berat benda kerja (maks.): 100 kg, suhu: 220 °C, kapasitas pemanasan: 80 kW (108,77 hp), tinggi benda kerja (maks.): 1.200 mm, panjang benda kerja (maks.): 2.500 mm, bahan isolasi: Mineralwolle 75 kg/m³, ketebalan isolasi: 150 mm, lebar benda kerja (maks.): 800 mm, The continuous system consists of the following components: Iaedpfx Afjum Uflsijr - Chemical pre-treatment by spraying - Dryer - Powder coating system - Powder curing oven - Conveyor technology (indexed operation) - Electrical control system