Pusat mesin

SW Schwäbische Werkzeugmaschinen BAW06-22

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Pusat pemesinan Produsen: SW EMAG Model: BAW06-22 Tahun pembuatan: 2012 Sistem kontrol: Siemens 840 D sl Jarak spindel: 600 mm Perjalanan X: 600 mm Perjalanan Y: 630 mm Perjalanan Z: 510 mm Kecepatan rapid max. di X/Y/Z: 45 m/menit Tipe dudukan alat: HSK A63 Majalah alat: 2x42 buah Kecepatan spindle milling: 17.500 rpm Daya penggerak: 38 kW Sistem pendingin Knoll Kjdpfxsyft R Ss Ac Hjdh Pompa bertekanan tinggi IKZ 70 bar

Tahun pembuatan: 1997, Kondisi: bekas, de-hu-1 Kedpewh Shvefx Ac Hedh

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 22.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2080594, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 400 mm, jam operasional spindle: 9.500 h, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, CNC Control SIEMENS 840D SL Electrical Connection Supply Voltage: 3 × 400 V / 50 Hz (grounded) Network Type: TN-S or TN-C network Total Connected Load: 133 kVA Power Factor: 0.6 Protection: 200 A gG (5 s) Weight Machine Operating Weight: 20,000 kg Transport Weight: 16,000 kg Tool Magazine Tool Change: Pick-up system Kjdext D Ezopfx Ac Hsdh Tool Management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum Total Tool Weight: 350 kg Feed Drives Type of Drive: Three-phase synchronous motors Travel Measurement System X/Y/Z: Direct, absolute X-Axes (X1 and X2) Rapid Traverse: 100 m/min Max. Acceleration: 12 m/s² Kv Factor: 7 Peak Force: 2 × 10,000 N Continuous Force: 2 × 5,000 N Positioning Accuracy: Tp = 0.008 mm Y-Axis Rapid Traverse: 100 m/min Max. Acceleration: 10 m/s² Kv Factor: 7 Peak Force: 10,000 N Continuous Force: 5,000 N Positioning Accuracy: Tp = 0.008 mm Z-Axes (Z1 and Z2) Rapid Traverse: 100 m/min Max. Acceleration: 20 m/s² Kv Factor: 7 Peak Force: 2 × 5,000 N Continuous Force: 2 × 2,500 N Positioning Accuracy: Tp = 0.008 mm Main Spindles Spindle Arrangement: Horizontal, dual spindles side by side Motor spindles, liquid-cooled, synchronous drive Spindle Diameter: 40 mm Tool Interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Clamping Force (mechanical): > 18 kN Wear Limit: 16 kN Speed Range: 1 – 17,500 rpm Acceleration Time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated Power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Working Area Spindle Distance: 600 mm Travel: - X-axis: 600 mm - Y-axis: 600 mm (optional 875 mm) - Z-axis: 500 mm Workpiece Clamping / Table System Swiveling mount with two separate rotary tables for fixture bridges Swivel time 0–180°: 3.5 s Max. Asymmetric Load: 800 Nm Rotary Table Ø 800 mm, Repeatability: < 0.008 mm Max. Workpiece Weight: 600 kg Peak Torque: 981 Nm Rated Torque: 698 Nm Max. Table Speed: 50 rpm Angular Acceleration: 2.5 – 10 rev/s² Positioning Accuracy: ±5" Tangential Torque: 4,500 Nm Max. Load Torque: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Note The system is supplied without product-specific tools, fixtures, or robot grippers.

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 48.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2080233, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 400 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, CNC control system SIEMENS 840D Electrical connection Connection voltage: 3 × 400 V / 50 Hz (earthed) Network configuration: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Fusing: 190 A gG (5 s) Weight Operational weight of machine: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X-axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Kdedpsxt D Ebsfx Ac Heh Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindle side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Working Area Spindle spacing: 600 mm Travel: X-axis: 600 mm Y-axis: 600 mm (optionally 875 mm) Z-axis: 500 mm Workpiece Clamping / Table System OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carrier (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided toothing on the swivel carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5″ Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Tahun pembuatan: 1990, Kondisi: baik (bekas), CNC 4th axis Kdjdpfogabu Uex Ac Heh Make: NIKKEN Type: CNC-200, Year: 1990 with tailstock and base plate.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 19.403 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 630 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 840D Solution Line, kecepatan spindel (maks.): 17.500 rpm, pasokan pendingin: 70 batang, hidung spindel: HSK63, jumlah spindel: 2, jumlah slot dalam magazin alat: 144, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Precision machining center, Siemens Sinumerik 840 D Solution Line control, travel: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 working spindles 1–17,500 rpm, torque motor drive system, equipment includes: oil distributor for rotary table, pneumatic pressure amplifier, magazine extension with total of 144 tool stations (2 x 72), clamping hydraulics base module, high-pressure pump 70 bar, coolant mist extraction system, automatic loading door, air flow monitoring, inductive tool breakage detection, chip conveyor KNOLL 800 K-1/400, coolant filtration unit KNOLL FKA 1200 with compact band filter, and much more. Kodpfxewgh Hlo Ac Hedh

Kondisi: bekas, Tahun pembuatan: 2001, 1 Kodpou Rnlusfx Ac Hedh

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), 70 running meters SSI Schäfer Palflex pallet racking incl. wire mesh shelves Used goods, good condition, see photos Year of manufacture: 2006 Height: 4 m Depth: 120 cm Bay load: 12,000 kg Galvanized frames Kdsdpekx E I Nsfx Ac Heh Red beams Wire mesh shelves included! 2 pieces of mesh per 2.7 m beam length Negotiable price: € 6,950,-- net ex stock Offer consists of: + 26 pre-assembled frames, depth 120 cm, height approx. 4 m + 100 beams, length 2.7 m, 1,500 kg per bay with evenly distributed load + 200 safety locking pins + 100 galvanized mesh shelves for 50 bays each 2.7 m beam length + 104 concrete anchors + Load capacity signs Goods in stock. Transport and installation available on request. Inspection possible anytime by appointment. Further information available on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Technical data, specifications and prices subject to change and prior sale. See our GTC. All prices excl. VAT ex stock) Purchase / Sales: We are always looking for and offering numerous items from different sectors - broom-clean company clearances - business liquidations - Fast, flexible, efficient! - We also clear and/or dispose of assets for insolvency administrators. Contact us with a few keywords and we will reply promptly. To visit our website, please click on our logo!

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), Technical specifications: Ksdpfsd Iuqajx Ac Hedh - Load capacity: 15,000 kg - Net weight: 960 kg - Workpiece diameter (insertable): approx. 50 – 3,200 mm - Roller diameter: 250 mm - Roller width: 240 mm - Rotation speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SINUMERIK 840D Powerline Spindle speeds – infinitely variable: 1 – 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z axis: 10,000 N B-axis rapid traverse: 11.20 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 – 500 rpm Kdsdpjw Df A Ssfx Ac Hjh Tool magazine: chain magazine for 120 tools Tool diameter: 100 mm Tool diameter with 2 free adjacent spaces: 160 mm Max. tool length: 350 mm Max. tool weight: 10.00 kg Total connected load: 60.00 kW Machine weight approx.: 13.00 t Installation dimensions approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SINUMERIK 840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, operation mode 4, extraction system.