Tempat alat / tempat alat

system 3R 3R-901-20

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 1.626 mm, jarak lintasan sumbu Y: 1.016 mm, jarak gerak sumbu Z: 813 mm, berat keseluruhan: 13.611 kg, panjang meja: 1.626 mm, lebar meja: 914 mm, model controller: HAAS, daya nominal (semu): 22 kVA, diameter meja putar: 760 mm, kecepatan spindel (maks.): 6.000 rpm, beban meja: 4.536 kg, Perlengkapan: konveyor serpihan, Commissioned 03/2006 IKZ 70 bar (TSC 1000) 30-station tool changer (BT50) Full 4th axis Spindle & gearbox replaced in 2017 Single-shift operation Machine can be inspected under power Fgjdpfxevgmr Is Ahasd !!!! Free loading until CW04/2025 !!!! (In case of same-day delivery of our new machine)

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Fgodpfxst Hw T Ss Ahaod Spindle drive 4.5 kW Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Payment: strictly net – upon receipt of invoice

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: PRJ069841, ALZMETALL bench drill Drilling capacity in steel: 14mm Fgjdpolub Htjfx Ahaed Short taper spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-table distance min. / max. 75/357mm, machine table height adjustment via hand crank, machine baseplate usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-baseplate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Infinitely variable speed 230-4000 rpm Standard features: 5" TFT LCD display with touch function: manual input of target spindle speed, actual speed display, integrated drilling depth indicator with touch zero-point transfer, virtual depth gauge on the display, machine status and warning messages in the display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 Volt, 50 Hz, plug pre-assembled, cable length 2m, three separate buttons for forward - reverse - stop, spindle brake function, spindle guard with electrical interlock, lockable main switch, mushroom head emergency stop button (latching), infinitely variable speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Delivery time: ex stock Waiblingen Beinstein.

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas),

Kondisi: baik (bekas), Description: The machine is in good technical condition, with the possibility of testing upon prior agreement. Max turning diameter: 660 mm Max machined diameter: 660 mm Main spindle: - Speed range: 35–5000 rpm - Main drive power: 22/15 kW - Max torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub-spindle: - Speed range: 35–5000 rpm - Power (10 min/continuous): 18.5/15 kW - Max torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power supply: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flushing (cooling) unit: - Pump capacity: 20 l/min - Pump pressure: 5 bar Fedpfxey Amqzs Ahaegd Accessories: - Technical documentation - Chip conveyor with cooling system - Tool magazine for 20 tools - B axis (positioned in 0.001° increments) - C axis, Y axis - Indexing rotation position for the sub-spindle - Main and sub-spindle synchronization - Tool presetting device (Tool Eye) - Front door interlock - Tool magazine for 20 tools - Complete cooling system - Interface for IC memory card

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Pressing force: 320 t Sheet thickness: 0 mm Strokes per minute: 80 spm Total pressing force: 320 t Stroke: 30 - 80 mm Clamping area (lower table): 630 x 740 mm Clamping area (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in as-new condition with new CE marking. MAIN RAM Total force (nominal): 320 t Minimum stroke: 30 mm Stroke: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm Fgjdpfsvwgl Njx Ahaed TOOL DIMENSIONS Lower table - width: 630 mm Lower table - depth: 740 mm Upper table - width: 630 mm Upper table - depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, XACHSE-2024-06-20-01 Fgjdpfozapp Hjx Ahasd

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Fedpfxjr A Hcbo Ahaogd Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, 1 Fgsdpfjy Twa Usx Ahajd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, 1 Fedpsyxh Hpefx Ahaegd