3R-292.3 , 3R-293.3 ,

System 3R Spannmittel für Drahterodiermaschine

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. Fjdpfx Aaofxyhfjgspd The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baik (bekas), Tahun pembuatan: 2007, 1 Fpjdpfju A Dn Njx Aagod

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009,

Tahun pembuatan: 2007, Kondisi: diremajakan ulang (bekas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in water bath) / 800 kg (out of water bath) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Fpjdpemmfwuefx Aagjd Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled upon receipt of order. You will receive a 6-month warranty on all machine components. We are also pleased to offer you commissioning and training services.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 14.000 h, kecepatan spindel (maks.): 18.000 rpm, berat keseluruhan: 10.500 kg, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: SIEMENS, model controller: 840 D, jumlah sumbu: 5, This HERMLE C40U 5-axis universal machining center was manufactured in 2007. It offers travel distances of 850 mm (X-axis), 700 mm (Y-axis), and 500 mm (Z-axis), with rapid traverse rates of 45 m/min. The machine is equipped with a spindle speed of 18,000 rpm and a tool changer with 38 positions. If you are seeking high-quality machining capabilities, consider the HERMLE C40U machine we are offering for sale. Contact us for further details. • Operating voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V Fpjdpfsyly A Iex Aagod • Total connected load: 41 kVA • Total rated current: 60 A • Main wiring diagram: 1-322-MS-96-002 • Rapid traverse: 45 m/min • Tool changer: 38 positions • Axis configuration: 5 axes • Linear axes: X, Y, Z • Rotary axes: A-axis (off-center), C-axis (NC rotary tilting table Ø420 mm) • NC rotary tilting table: Ø420 mm • Internal coolant supply (ICS): 80 bar • Laser tool measurement / tool breakage monitoring • Measuring probe: Heidenhain • Electronic handwheel • Electronic thermal compensation • Spindle hours: approx. 14,000 h (spindle replaced 11/2017) • Accessories: Without tools, tool holders, and zero-point clamping systems Additional equipment: • Paper band filter • Chip conveyor • Chip rinsing gun • Oil mist extraction unit Technical Specification Taper size HSK 63

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Single-screw extruder WEBER NE5 1-30:D with 2 WEBER ZE30 co-extruders Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: Suitable for PE, PP, or three-layer pipe production, or for sheathing pipes with strip application The line was used for manufacturing heating pipes Condition: Very good 2 units WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Fpjdohy Tp Depfx Aagod Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany

Tahun pembuatan: 2024, Kondisi: baru, oris- Extruder MINI ESE 20/25 D Technical Data Screw diameter [mm]: 20 Fjdpfx Aaehx Elfjgopd Screw length [L/D]: 25 Screw speed [rpm]: 20–200 min⁻¹ Screw axial pressure [bar]: 300 (continuous operation), 350 (maximum) Drive: Three-phase motor with frequency converter Drive output [kW]: max. 2.5 Reduction gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590* Electrical connection values: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control: electric resistance heating bands with mica insulation Max. processing temperature [°C]: 300 Control cabinet and control panel The electrical installation of the extruder is housed in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the buyer, and a chiller unit for water cooling is not included in the offer. Extruder tooling is not included in the offer.

Kondisi: bekas, Tahun pembuatan: 2017,

Kondisi: baik (bekas), Tahun pembuatan: 1988, panjang penggilingan: 1.000 mm, lebar penggilingan: 550 mm, tinggi penggerindaan: 400 mm, diameter roda gerinda: 400 mm, lebar roda gerinda: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12/1988 Delivery time: immediate Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Fpsdju Rqynjpfx Aagjd Electronic straight dresser with compensation Vertical digital readout Mounting with grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW, 1435 rpm Taper wedges Coolant system with universal paper band filter Complete documentation

Kondisi: diremajakan ulang (bekas), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measuring uncertainty 4.0 + 4.5L/1000 (in original condition; currently significantly improved after modernization) Completely modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Fjdjdpak Rspfx Aagjpd Entirely new Inca Premium software (alternative software available on request) HP Workstation PC Optional: Laser scanner (e.g. Kreon) Probe changer Rotary table, etc.