Mesin pembengkok profil

Tauring ALPHA 120PQI

Kondisi: baru, Tahun pembuatan: 2025, de Rsdshv U U Dspfx Ahwjp

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), The roller stand is also available for rental (including trial rental). Maximum load: 100 t per set, consisting of 1x drive unit and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotational speed: approx. 130 – 1,250 mm/min Roller material: polyurethane Control: wired hand pendant Additional available options, e.g.: additional idler units, foot switch Rsdpfx Ahemk Iktswep

Kondisi: siap digunakan (bekas), panjang total: 900 mm, lebar total: 400 mm, tinggi total: 1.100 mm, berat kosong: 140 kg, pipa gas: Ø50 x 3,91 mm pipa baja: Ø60 x 3 mm pipa baja tahan karat: Ø60 x 2 mm pipa tembaga/aluminium: Ø64 x 4 mm batang solid: Ø35 mm batang solid persegi panjang: 60 x 10 mm batang datar (keras): 60 x 16 mm batang datar (mudah dibengkokkan): 60 x 30 mm profil kotak: 60 x 30 x 4 mm radius maksimum: 200 mm kecepatan pembengkokan: 1,25 - 2,5 rpm video klik di sini Rsdpsxllirefx Ahwsp Daya motor: 1,5 kW

Kondisi: baik (bekas), Tahun pembuatan: 2000, 1 used 4-roll plate bending machine Manufacturer: Stöting Model: VB 322 Serial Number: 1591 Year of manufacture: 2000 with Acon control system Working length: 1000 mm Max. sheet thickness: 12 mm Rsdpfxev Ibkbe Ahwsp Pre-bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions (L): 3200 mm (W): 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 t

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, 600 kg load capacity welding positioner, height-adjustable with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed range: 0.01 - 1.1 rpm Tilting angle up to 135° Hand and foot remote control with speed display Redpfod Anz Rjx Ahwep Very robust construction

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2005, jam operasional: 150 h, PBM35-DE-2024 Rodsxc N Rhepfx Ahwop

Kondisi: baik (bekas), Tahun pembuatan: 1996, Pipe diameter 6 - 28 mm Wall thickness 2 mm Bending radius min. 2 x D Control system IPU 20 Bending radius max. 5.0 x D mm Max. bending angle 190° Mandrel length 3000 mm Operating pressure 180 bar Hydraulic motor 4 kW Machine weight approx. 900 kg Space requirement approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 preset bending angles and display in the control panel for angle specification, angle detection and angle measurement via absolute value rotary encoder, automatic tool table reset, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Rodovtgn Nopfx Ahwep Operating modes: manual and semi-automatic. Control buttons: hydraulic on/off, operating mode selection, clamp close/open, feed forward/back, mandrel forward/back, bend forward/back, lock forward/back, mandrel lubrication, rotation device forward/back, table reset, length stop forward, emergency stop. The machine comes from prototype production and was only lightly used until 2000. Afterwards, the machines from this department were sold. However, the purchaser did not use the tube bending machine, so it has only been stored since then and has not been in operation (original paintwork). Machine offered at a special low price! This is a used machine; therefore, sale is made excluding any warranty. STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM.

Kondisi: baru, Tahun pembuatan: 2022, EN23070101 Redpsmf T Hpefx Ahwep

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework Rjdpfsng Amkjx Ahwep • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: baru, Tahun pembuatan: 2025, de Rjdpshv U Szsfx Ahwsp