Mesin bor lubang dalam

TBT / SFT M200-1-850

Kondisi: bekas, Thread rolling machine - Thread rolling machine ORT RP18 2-Rolls Shaft diameter: 69.95 mm Gbodpfxst Apugo Ahuek See video The machine is located in our warehouse in Gussago (BS), powered up. Test run possible Mimu Werkzeugmaschinen Thread rolling is a mechanical process without chip removal, which can be performed cold or hot, aimed at improving surface finish (and thus fatigue behavior).

Kondisi: siap digunakan (bekas), Operates using the magnetic particle inspection method, complete with documentation and accessories. On-site inspection is possible. Godeq Npf Uepfx Ahujbk

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), A Spinner simultaneous turning center with three turrets and comprehensive accessories, spare parts, and tooling is available. Travel paths X1/X2/X3: 180mm, Y1/Y2: +/-45mm, Z1/Z3: 704mm, Z2/E2: 620mm/720mm. Rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5,000 rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700 rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: stations: 3x12, speed: 8,000 rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2,880mm/2,130mm/1,990mm. Weight: approx. 7,500kg. Operating hours: 27,102h. Control: Fanuc 31i. Including Top Automazioni bar feeder, coolant/high-pressure system with 80bar, chip conveyor, fire extinguishing system, an extensive tooling package, and additional spare parts. Documentation available. On-site inspection possible. Gbodpfx Aeua E Trjhuok

Kondisi: baru, Tahun pembuatan: 2024, EX DEMONSTRATION MACHINE ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with Coolant Device B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine light Standard features: Mushroom emergency stop button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector Spindle guard with electrical interlock Technical data: Drilling capacity in steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M24 Cast iron EN-GJL-200 (GG20): M30 Short spindle taper: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Gsdpfod Hy Elsx Ahujbk Distance spindle-table min./max.: 117 / 701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Tahun pembuatan: 2001, Kondisi: diremajakan ulang (bekas), Affordable MAZAK Laser Cutting System NTX48 1.5kW Year of manufacture: 2001 Very well-maintained, fully refurbished MAZAK laser machine with 1500W Sheet format: 2500mm x 1250mm Minimal installation area required: 2.6m x 6m Small parts conveyor belt Fully enclosed machine cover Mild steel: up to 12mm Stainless steel: up to 6mm Gbsdpfx Aehturcehuok Plastic processing possible Including software Including warranty Including extraction system Including commissioning and training Can be tested under power! === Optionally available with fully automatic loading and unloading ===

Tahun pembuatan: 2025, Kondisi: baru, de Gsdpfx Asgd Uifjhusbk

Kondisi: bekas, Table clamping surface 170 x 170 mm Clamping surface of the base plate 170 x 170 mm Throat depth 185 mm Gbsdpfovh Nbbsx Ahuok Quill stroke 65 mm Spindle speeds 500 / 896 / 1473 / 2428 rpm Column diameter 65 mm Total power requirement 0.37 kW

Kondisi: baik (bekas), Tahun pembuatan: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Gbodpfx Aevca Rcohuek Model: M200-2-850 Number of spindles: 2 Drill slide stroke: 850 mm Drilling process: Single-lip deep hole drilling Drilling depth with: Plunging spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – Self-driven Feed rate: 20 – 500 mm/min Rapid traverse speed (NC operation): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 RPM Tailstock Motor power: 0.75 kW at 1000 RPM Spindle speed: 500 RPM Max. stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control system: Sinumerik 805 M No guarantee is provided for the accuracy, completeness, or timeliness of the information.

Kondisi: baik (bekas), Tahun pembuatan: 2016, Abmessungen des Tisches: 3000 x 1700 mm Verfahrwege X/Y/Z: 3200 x 2100 x 920 mm Tischbelastung: 11.000 kg Abstand Spindelnase zu Tisch: 164 – 1084 mm Spindelaufnahme: DIN 50 Gsdpfxjwu Dlaj Ahuobk Spindeldrehzahl: 6.000 U/min Werkzeugmagazin: 40 Plätze (ATC) Steuerung: Hurco WinMax 5 Späneförderer

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBHF-KBK1, DEMAG KBK crane system, crane runway approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 kg (0.125 t) Gbjdpfjpiarnox Ahujk Technical details of the system: - Crane runway made from Demag KBK1 sections - System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, power supply, brackets/hangers, etc. - Includes 1 bridge with Demag DC-COM chain hoist (125 kg capacity) The crane is disassembled and available immediately. Very good used condition, see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems available. Load capacities from 125 kg up to 1600 kg. Please inquire about your crane runway requirements, including jib load and dimensions.