Pusat pengeboran dan frais dalam

TBT Tiefbohrtechnik GmbH + Co BW200-1-800

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. daylight between platens: 3,800 mm Mould height: 800 – 1,800 mm Fpjdpsw Aw Taofx Adgsb Tie bar spacing (HxV): 2,000 x 1,600 mm Platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and Cooling: Installed power of main drives: 265 kW Hydraulic tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated from the machine control panel Machine in excellent technical condition – latest generation of ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, white goods, technical applications). The machine remains powered and can be tested on site. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operational videos, technical documentation, and arrange a convenient viewing time.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Lectra VIRGA.FA.CUT.MOTIF-E fabric cutting machine, year 11/2021, working width 170 cm. Single-ply cutting, specifically designed for stripes, checks, and panel cutting. 86 operating hours. The machine is connected and available for testing upon request. Fpedpfx Adovva Uusgsb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, TRANSLATION Fjdpfx Adovm Eixjgjpb YEAR: 2008 MAXIMUM RAM PRESSURE: 2,000 tons RAM STROKE: 1,500 mm TABLE DIMENSIONS: 5,000 x 2,380 mm UPPER BLANKHOLDER PRESSURE: 300 tons BLANKHOLDER STROKE (ram): 200 mm RAPID TRAVERSE SPEED: 220 mm/sec CUSHION CAPACITY: 600 tons CUSHION STROKE: 400 mm OVERALL HEIGHT FROM FLOOR: 9,145 mm FRONT OPENING (between uprights): 5,000 mm TOTAL WEIGHT: n/a

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Fodpst Hwucsfx Adgjpb Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036940, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, tekanan injeksi: 1,892 batang, berat injeksi: 358 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 500 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 9.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, allowing you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine is suitable for diverse applications, such as packaging, electrical and electronics industries, medical technology, and automotive sector. Your advantages: – Optimised price-performance ratio for a wide range of applications – High energy efficiency due to the all-electric machine concept – Ability to meet demanding delivery deadlines thanks to a base machine concept with a broad spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, YOM 2013) CONTROL SYSTEM ■ MC P1 with 15” TFT colour display, multitouch functionality CLAMPING UNIT ■ Clamping force: kN 1600 ■ Max. mould opening force: kN 120 ■ Clear space (H x V): mm 570 x 520 ■ Mounting platen size (H x V): mm 770 x 720 ■ Mould installation height min. - max.: mm 200 - 500 ■ Max. opening width: mm 950 ■ Max. mould opening stroke: mm 450 ■ Ejector drive: electric ■ Ejector stroke: mm 100 ■ Ejector force fwd/back: kN 33 / 33 ■ Ejector speed fwd/back: mm/s 300 / 300 ■ Max. mould weight: kg 1200 INJECTION UNIT ■ Screw diameter / type: mm 50 / standard ■ Effective L/D ratio: 20.2 ■ Injection pressure: bar 1892 ■ Shot volume: cm³ 393 ■ Shot weight at max. stroke for PS: g 358 ■ Injection speed: mm/s 200 ■ Injection flow rate: cm³/s 393 ■ Screw drive/speed: rpm 267 ■ Plasticising capacity (standard screw): g/s 36.5 ■ Nozzle contact force: kN 42 ELECTRICAL SPECIFICATIONS Fpsdsugfw Dopfx Adgsb ■ Connected load: kW 31.2 ■ Installed heating capacity: kW 15.5 ■ Power supply: V / Hz 400 / 50, 3 phases with neutral DIMENSIONS & WEIGHT ■ Net weight incl. electrical cabinet: t 9.7 ■ Length x width x height: m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT ■ Wear-resistant plasticising unit ■ BluePower full insulation of plasticising cylinder ■ Open nozzle ■ Air valve 1-fold (BWAP) ■ Pneumatic hot runner shut-off control 1-fold ■ Electrical interface for pneumatic cascade 4-fold ■ Euromap handling interfaces E18 + E67 ■ Euromap interface (central computer) E67, E77 ■ Water manifold 4-fold ■ Electrical pre-wiring for hydraulic auxiliary unit ■ Automatic central lubrication ■ Adaptive Process Control (APC) ■ Injection compression moulding circuitry ■ Graphic analysis package ■ Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Gaya penutupan: 110 t Diameter sekrup: 22 mm Volume tembakan: 41 cm3 Rasio L/D sekrup: 20 Volume langkah terhitung: 41,8 cm3 Tekanan injeksi yang benar: 2.864 bar Kecepatan putaran maksimum sekrup: 500 min Torsi sekrup: 150 Nm Gaya kontak gerak nosel: 250/40 mm/kN Aliran injeksi luar: 76 cm3/s Daya pemanas silinder: 6,3 kW Jumlah zona pemanasan: 4 Tipe: Horisontal Penggerak: Listrik Fjdpfx Asu Eki Sedgopb

Kondisi: baru, Tahun pembuatan: 2023, Technische Daten CNC – 800 Steuerung: Syntec Antriebssystem: YASKAWA-Servoantrieb Hauptmotor: 7,5 kW Spindeldrehzahl: bis 7.000 U/min Max. Bohrtiefe: 800 mm Bohrdurchmesser: 2,5 bis 30 mm Verfahrweg X: 800 mm Verfahrweg Y: 800 mm Verfahrweg Z: 800 mm Vorschubgeschwindigkeit: 300 mm/min Spindelmotor: Servo 11 kW X-Servomotor: 3,9 kW Y-Servomotor: 3,9 kW Z-Servomotor: 3,1 kW Ölpumpenmotor: 5,5 kW Öldruck: 21 bar Tischbelastung: 6.000 kg Maschinengewicht: 8,3 t Leistungsaufnahme: 34 kW Maschinenmaße: 4,2 x 3,5 x 2,6 m Fodpjk N Dtusfx Adgepb Aufstellung auf Anfrage. Preis: frei LKW.

Kondisi: baik (bekas), Tahun pembuatan: 2023, jam operasional: 50 h, Marke: Ferromatik Milacron GmbH Typ: eQ-280 - 2290 Baujahr: 2023 Betriebsstunden: 50 Stunden Fjdpfx Ajw Ebpwedgopb Schließkraft: 2.800 kN Schneckendurchmesser: 60 mm Einspritzdruck: 2.238 bar Schussvolumen max.: 905 cm³ Max. Abstand zwischen Holmen: 710 x 660 mm Min. Werkzeughöhe: 250 mm Max. Plattenabstand: 1.400 mm Abmessungen (LxBxH): 8.500 x 2.100 x 2.500 mm Gewicht: 18.400 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Clamping force: 80 t Fodpewzzw Tsfx Adgspb Screw diameter: 35 mm Shot volume: 144 cm³ Type: Horizontal Drive: Hydraulic

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off Fpjdpsuggb Dsfx Adgeb  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.