Listrik – 4 roda

TCM FA15B

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 Hsdottah Rjpfx Aahog ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.