Roll ulir UPWS 25

Thread rolling machine UPWS 25

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Dodpfxeuz If Ns Alysck Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, Tahun pembuatan: 1991, Workpiece diameter 30 mm Thread length 110 mm Thread pitch 0.5-2.75 mm/rev Total power requirement 4.5 kW Machine weight approx. 1.7 t Space requirement approx. m M O N N I E R & ZAHNER Switzerland Thread whirling machine with workpiece loading system Dedpfot Hwzcjx Alysck Type MZ 600, year of manufacture approx. 1991, #3591 _____ Max. workpiece diameter approx. 30 mm Max. workpiece length approx. 110 mm Axial milling length approx. 100 mm Module in steel approx. 1 Worm starts 1 Axis distance tool-workpiece min./max. 0 - 70 mm Whirling head swiveling +/- 12° Tool size approx. 70 x 16 mm Whirling head speeds approx. 1,000 - 6,000 rpm Pitch range approx. 0.5 - 2.75 mm/rev Whirling head drive approx. 1.5 kW Total drive approx. 4.5 kW - 220 V/380 V / 50 Hz Weight approx. 1,700 kg Accessories / Special Equipment: Machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a vibratory bowl feeder from Rübenach with pneumatic swing gripper for inserting the blanks, as well as a tailstock (pusher) and with ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as a longitudinal and cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew while the cross slide sets the thread depth. Copying unit at the end of the cross slide with template holder for tapered screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electrical program control with display of movement sequence. Error display, workpiece counter, oil mist extraction, coolant system, etc.

Kondisi: bekas, Tahun pembuatan: 1986, berat keseluruhan: 6.500 kg, daya: 42 kW (57,10 hp), tegangan masuk: 380 V, panjang broaching: 1.600 mm, jumlah posisi broaching: 1, diameter benda kerja (maks.): 500 mm, Manufacturer: Varinelli Milano, Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine number: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Broaching stations: 1 piece Clear width between cylinders: max. 540 mm Cutting speed: hydraulically variable from 1 m/min up to max. 8 m/min Return speed: hydraulically variable up to max. 18 m/min Machine footprint: see machine layout drawing Power supply / connected load: 380 Volt, 50 Hz / 42 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-actuated locking mechanism (DIN 1417) in the drawbridge. The tool feeder system is locked hydraulically and mechanically. The machine features a coolant unit with an integrated chip conveyor for installation in a pit. Remarks: The machine still has its original paintwork. It is designed for use in series production for medium and large batch sizes. For optimal utilization, installation in a pit is ideally recommended. Draw heads and ejector pins are available on request. The machine is available for inspection at our warehouse. Djdpfxjwqmaxj Alyeck General Information: We constantly have a large selection of approx. 80 used broaching machines with pulling forces from 3,000 kg up to 63,000 kg, both in horizontal and vertical execution, in stock. Many of our broaching machines in stock are available for demonstration. If required, we can offer you used equipment such as draw heads, ejector pins, broaching tools, and other specific accessories. As a contract broaching service provider, we can also assist you with technical enquiries based on our 50 years of experience in broaching technology.

Kondisi: bekas, Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D32L/7864, Nomor penawaran: D32L/7864 Jenis mesin: Mesin pembuat pegas Info: diperbarui Merek: WAFIOS Tipe: FUL8 Tahun pembuatan: 1982/2000 Dsdpfx Ajwi S Ekelysck Diameter kawat: 2,0-9,0 mm Diameter pegas: 10-120 mm Panjang masukan: tanpa batas Kapasitas - unit/menit: 90 Lokasi: Di gudang kami

Kondisi: bekas, Tahun pembuatan: 1996, Maximum core drilling diameter: 25 mm Drilling depth: 1000 mm Swing diameter: mm Total power requirement: 25 kW Machine weight approx.: 12.5 t Space requirements approx.: m T B T CNC-controlled horizontal deep hole drilling machine Type: BWP 250 Year of manufacture: 1996, mechanically and electrically overhauled in 2006 Working area: - X axis = Drill carriage travel: approx. 2,000 mm - Z axis = Drill carriage stroke: approx. 1,200 mm - Drilling depth with 2 steadies: approx. 1,000 mm - Y axis = Drill carriage vertical travel: approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity – solid material: approx. 4 – 25 mm diameter Tool holder: HSK 50 Spindle speed: 1,260 – 15,000 rpm Feeds / rapid traverse for Z/X/Y axes continuously variable: 100 – 10,000 / 15,000 mm/min Feed drive power: 27 Nm / 1,000 daN Spindle drive power: 7 kW Total drive approx.: 30 kW – 400 V – 50 Hz Weight approx.: 10,000 kg Dcsdet Hw Ayopfx Alyek Accessories / Special Equipment: - Ideal machine for complete machining of larger workpieces, moulds, and plates using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, keyway milling up to Ø 30, spiral drilling/enlarging up to Ø 30, countersinking, and thread tapping up to M 24 x 3. - SIEMENS 840 D 4-axis CNC control with process monitoring, etc. - High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds - Pneumatic workpiece-contact drill sleeve carrier (200 mm), dual-swivel - Fixed 12-pocket tool changer by MIKSCH, Type CTM 40 with 800 mm travel, suitable for spiral drills, end mills and tapping tools; changing from ELB deep hole drills to standard tools is manual - The table is stationary, designed for high workpiece weights and accurate drilling - Mounted on the table: FIBRO CNC rotary indexing table Type RTN 400 = 420 x 420 mm as B-Axis - Optional: Hydraulic FIBRO rotary indexing table, Ø 1,000 mm, for division 3–144 or angle degrees 2.5–120° - Large coolant system approx. 11 kW pump with scraper belt chip conveyor and various filters - 2 support steadies for supporting the deep hole drill shafts - Full machine enclosure with side and front access Condition: very good – a truly rare opportunity, can be demonstrated under power soon Delivery: ex stock here Payment: strictly net upon receipt of invoice We look forward to your order. For further information, please do not hesitate to contact us.

Kondisi: diremajakan ulang (bekas), Mesin bor lubang dalam 2-spindel sedang dirombak diremajakan total, setelah perombakan seperti baru. Data teknis Metode pengeboran: Sistem ELB Jumlah spindle bor: 2 Diameter bor minimum: 1 mm Dodjx E U S Eopfx Alyjck Diameter bor maksimum: 8 mm Kedalaman bor maksimum: 300 mm Rentang diameter nominal benda kerja: 5-30 mm

Tahun pembuatan: 2013, Kondisi: bekas, Technical details: Swing diameter: 80 mm Workpiece length: 450 mm Machine weight approx.: 3500 kg Dcjdpsixl Ahjfx Alysk

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), Three identical Superfinish machines by Nagel are available, connected load: 11 kW, control system: SIEMENS SIMATIC HMI, length: 2565 mm, width: 2600 mm, height: 2663 mm, operating hours: 34,051 h, year of manufacture: 2x 2015, 1x 2014, with documentation. Additionally, two Promot automation units are available. Dcedpfx Alek S Ehkoyjk

Kondisi: bekas, ORT 3RP10 3 Roll Gewindewalzmaschine Dcedpfxezbx D Ne Alyek

Kondisi: baik (bekas), Tahun pembuatan: 1998, DIJUAL: Mesin Penggulung Ulir ORT ITALIA RP 24 Mesin presisi untuk pembentukan ulir, ideal untuk produksi industri berkinerja tinggi. Kapasitas & Teknis Kapasitas tekanan: 24 Ton. Dedpfx Aey Shd Islyock Merek: ORT Italia. Model: RP 24. Tahun: 1998 Daya: 380V / 20A. Perlengkapan Otomatisasi: Pengisian otomatis terintegrasi. Kontrol: Panel kontrol digital. Pembuangan: Talang keluar termasuk.