Tangki tekan 19.600 liter yang dapat dipanaskan/didinginkan dari V2A dengan pengaduk balok

Thrun Maschinen- und Behälterbau 9626

GENERAL
Equipment: spray head, crane lugs
Design: vertical
Remarks: Presumably 3 cooling rings around the cylinder; heating connections cut off; 1 former manhole at the bottom of the cylinder was welded shut by the previous operator; base ends were cut off during dismantling and are loose (with minor dents; see photos)
External diameter: 2,900 mm
Internal diameter: 2,700 mm
Total height: 5,000 mm
Heating/cooling: available
Insulation: available
Max. overpressure: 3.0 bar
Agitator: paddle agitator
Stand type: height-adjustable legs
Location: Bremen
Nameplate:
Vacuum: 0.9 bar
Volume: 19,600 litres
Product-contact material: V2A 1.4301 (AISI304)
Condition: used
Cylindrical height: 2,900 mm
Last application: dairy
TANK
Number of legs: 4 pcs
HEATING/COOLING JACKET
Bottom tempering: double jacket
INSULATION
Insulation jacket: hermetically welded
Material of insulation jacket: stainless steel
EQUIPMENT
Manhole / dome: in top (DN 500)
Outlet: available
Outlet (alternative entry): 65 mm
Note: pressure marks on the insulation jacket, outlet end cut off
MATERIAL PROPERTIES
Material of tempering system: V2A 1.4301 (AISI304)
Material of legs: stainless steel
AGITATOR
Agitator manufacturer: Stelzer
Bottom bearing:
Gkjdpfsxqantjx Ag Rsf
Agitator arrangement: eccentric in top
Agitator data: not readable; motor/gear unit with traces of corrosion

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.