Wadah susun Wadah logam Wadah logam

Thyssen /Außenmaße:850x560x580mm(BxTxH)/ Innenmaße: 780x400x400mm /feuerverzinkt

Kondisi: bekas, Sweeping width 800 mm Container capacity 114 l Total power requirement 3.0 kW Practical area coverage 2,759 m²/h Maximum area coverage 5,232 m²/h Sweeper – Scrubber-dryer Operating hours: approx. 400 hrs. Fodjg Ti Ihjpfx Adgsft Including 4x brushes + charger Including new battery pack (consisting of 6x gel batteries) !!

Kondisi: hampir baru (bekas), Rotary vane vacuum pump with oil bath. Available in stock. Pump thoroughly overhauled. With warranty. Nominal flow rate: 300 m³/h Final vacuum: 0.1 mbar abs. For any inquiries, please contact us. Ffsdeftzzgjpfx Adgjt

Kondisi: baik (bekas), Fungsionalitas: belum diuji, berat keseluruhan: 80 kg, lebar total: 990 mm, tinggi total: 870 mm, panjang total: 1.180 mm, tinggi tumpukan: 800 mm, kapasitas tangki: 900 l, berat kosong: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking boxes / storage containers made of galvanized sheet steel. Manufacturer: unknown Overall dimensions of the stacking box: 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Fsdpevtckmsfx Adgjft Weight: approx. 80 kg/piece Notes: The steel stacking boxes were previously used by the former owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers / skips was carried out by forklift with rotator. Therefore, the stacking containers have been manufactured with extra thick walls. Sale is subject to prior sale, excludes any warranty or guarantee, and is intended for commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your Service Team Mertens & Frowein GmbH

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 510 mm, daya motor spindle: 25 W, berat keseluruhan: 5.600 kg,

Tahun pembuatan: 2007, Kondisi: baik (bekas), nomor mesin/kendaraan: 1380-1207, mit Siemens Sinumerik Bedienpanel mit Späneförderer Bedienpult Elektroschrank Ffodpfx Adom Nb Risget Spindeldurchlass 60 mm max. Werkstücklänge 340 mm

Kondisi: bekas, Tahun pembuatan: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length 200 – 640 mm Control: PLC Siemens S5 95 U Total power requirement: 25 kW Machine weight approx. 5 t Space requirement approx. 8.5 x 2.8 x 2.35 m Hydraulic cut-off and double-ended machining machine suitable for the pre-processing of trapezoidal thread spindles and other round workpieces, including cutting from bar stock and both-end machining such as chamfering, face milling, and drilling on stationary parts with rotating tools. The machine consists of: - Base machine model TR 60/4-650, workpiece length 640 mm - Bar feeder for bar length 2 – 3.5 m - Standard version for solid bars up to 40 mm diameter - Central positioning of bar feed rollers - Bar loading unit - Standard feed gripper - Indexing turret with 4 clamping stations, model TR 300.00 - 4 base jaws, width 80/140 mm, diameter 75 mm - Turret swivels in both directions - Sawing unit with worm drive TR 200.00, stroke 100 mm - Saw blade: 350 mm, speed 25/39 rpm - Motor power: 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 2 – USP.00/M - UF - Speeds: 360/720 rpm, 1.8/2.8 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left-hand threads - Machining unit no. 3 – USP.00/M - Speeds: 842/1684 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds: 943/1882 rpm, 3.3/4.0 kW - Working stroke: 80 mm - Rapid advance: 40 mm - Spindle mounting ISA 40/M 16 - Discharge chute - Metric ruler rails for all adjustment movements - Hydraulic system with delivery pump SAUER SUNDSTRAND - Accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and tank - Coolant pump CALPERA - Electrical system in separate control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine lamp - Signal beacon for machine downtime indication - Central lubrication - Chip conveyor Fedpfevp Sd Iox Adgoft In 2011, a comprehensive mechanical overhaul was carried out to optimize positioning and centering accuracy at a cost of €25,000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc., were replaced. The machine has hardly been operated in recent years, with total operating hours estimated by the owner at approx. 24,000. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: bekas, Pulverbeschichtungsanlage – Automatisch Die Anlage arbeitet mit einem Fördersystem. Das zu beschichtende Material wird an der Förderlinie aufgehängt; das System durchläuft automatisch die folgenden Schritte und beschichtet das Material nach der Reinigung mit Pulver. Ffjdpfx Adsv Npa Hoget Das optimal auf die vorhandene Betriebsstätte zugeschnittene Anlagenkonzept wird erstellt. Eine Sonderanfertigung erfolgt nach den spezifischen Anforderungen und Produkten des Kunden.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: XP2000, tinggi total: 7.550 mm, lebar total: 2.780 mm, panjang total: 3.070 mm, kapasitas muatan per bagian penyimpanan: 500 kg, tinggi konstruksi: 7.600 mm, jenis arus masuk: tiga fasa, tegangan masuk: 415 V, berat kosong: 500 kg, masa garansi: 12 bulan, kapasitas angkut: 20.000 kg, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan,

Kondisi: bekas, Tahun pembuatan: 2008, Technical details: Workpiece diameter – max.: 29 mm Workpiece diameter – min.: 26 mm Workpiece length: 66 mm Fedpfx Aelqac Sjdgoft The system was originally supplied for the following workpiece sizes: Diameter 26mm – 29mm Length 65mm – 66mm By using interchangeable parts in the clamping device, handling unit, etc., diameters of up to approx. Ø50mm and total lengths of up to roughly 400mm should be possible with some modifications. This is also dependent on tool lengths, machining lengths on the component, etc.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Specialised press designed from the ground up for briquetting iron, steel, and similar alloys. Equipped with integrated oil collection mats. Packaging table not included – only briquette guides (rails) are provided. Features clear bunker doors and oil heating elements as standard. The machines are operated via Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press, please contact us first! Technical Data: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total connected load: 34.2 kW Oil tank: 260 litres Filters: 4 Length: 2,000 mm Width: 2,000 mm Height: 2,200 mm Weight: 3,500 kg Fsdpfx Adstmugcsgeft Briquette size: 40–110, D80 mm Warranty: 2 years / 2,000 operating hours