Mesin uji retak

TIEDE Universal 500 W

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), en-1 Djdpfx Ajlxyp Hsa Tscd

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice. Dcedpfx Ajt Hw Nyea Tsd

Kondisi: siap digunakan (bekas), Operates using the magnetic particle inspection method, complete with documentation and accessories. On-site inspection is possible. Dsdpfx Aoq Npf Usa Tocd

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), A high-precision Takisawa CNC lathe with dual spindles is available. Spindle power: 2x 7.5 kW, speed: 5,000 rpm, spindle nose: F-80, tool holder: 2x 5 positions, max. turning diameter: 50 mm, max. turning length: 50 mm, max. workpiece weight: 2x 0.5 kg. Machine dimensions X/Y/Z: approx. 2,600 mm/2,550 mm/2,150 mm, weight: approx. 4,300 kg, control: 2x Fanuc Oi-TF, operating hours: 11,179 h. Includes rear chip conveyor, automatic central lubrication, full machine enclosure with coolant pump, portal loader type D, Raku Raku loader, reversing station, automatic loading/unloading doors per spindle, and discharge chute for inspection parts. Documentation available. On-site inspection possible. Dedpfx Aaeu Dm Izo Tjcd

Tahun pembuatan: 1987, Kondisi: bekas, nomor mesin/kendaraan: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Model: GS 36 – 6 A/C Machine No.: 7.0176 Year of Manufacture: 1987 Weight: 11t General / Technical Data: Portal-type 6-spindle automatic lathe Spindle pitch circle: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main processing time: Infinitely variable 1.95 – 78 sec. Secondary processing time: 0.79 – 2.13 sec. Drive power: DC motor, spindles 20 kW; feeds 8 kW Installation area: approx. 1720 x 4700 mm Remarks: The machine cannot be retrofitted for bar work. Features: – 1 creep drive for setup operation – 1 automatic central lubrication system – 1 coolant unit with piping and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-start with electrical interlock of the side door – Hinged belt chip conveyor – Machine configuration with DC drives for spindle speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical Configuration: The electrical equipment comprises a direct current (DC) main drive with 20 kW power for the spindle drive and an AC servo motor for the feed drive with 8 kW power (IP 54 protection class), along with the respective switching and control units as well as the required installation. Total machine connection: 32 kW/h. Dcedpfein Ub Tjx Aa Tjd

Kondisi: bekas, Tahun pembuatan: 1996, Diameter / mm Workpiece length / mm Length / mm MITUTOYO SURFTEST SV-500 Surface Roughness Tester with OLZE measuring plate Dimensions: 600 x 600 x 80 mm Dsdpotvm Smsfx Aa Tocd Target µm: 16 Actual µm: 10.00 Net weight: 85 kg Information on scope of delivery The package contains only the ordered product. Any other decorative items or objects shown in the product images are not included in the delivery.

Tahun pembuatan: 1984, Kondisi: bekas, Printing machine, embossing machine, stamping machine - Non-functional, control unit: defective - Pneumatic-hydraulic press - Stroke: 50 mm - Clear column distance: 850 mm - Table area: 400 x 370 mm - Dimensions: 1285/590/H1820 mm Dsdpfxed Hp Tzj Aa Tjcd - Weight: 416 kg

Kondisi: baik (bekas), Multi-spindle automatic lathe (6 spindles) Max. bar diameter: 16 mm Dcodpfsp Dux Tex Aa Ted Guide tubes: 4,000 mm Chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, For sale: A turning line for drive shafts including an end machining station (cutting to length & drilling). The line consists of the following machines: - Lang - Laru > For cutting to length and drilling - 3x Emag VTC 250 for machining (turning) the drive shafts Dsdpfx Aaoupgbwe Tocd All machines are connected via an Ewab conveyor belt. Each turning machine is loaded by a KUKA robot. Technical specifications for the machines can be found in the images.

Tahun pembuatan: 1990, Kondisi: bekas, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Overhauled: 2000 X-axis as longitudinally movable gantry: 850 mm Y-axis cross slide in the gantry: 1,200 mm Z-axis as measuring head quill (vertical): approx. 600 mm Dodpfx Aaot Hwqko Tscd Clearance between gantry columns: approx. 1,000/1,080 mm Clearance height: approx. 750 mm Total table size: approx. 1,000 x 2,100 mm Table height above floor: approx. 850 mm Machine height: approx. 3,050 mm Weight: approx. 3,800 kg Special equipment / accessories: - Granite plate as measuring table and as crossbeam, vibration-dampened - 3D measuring probe for accommodating 5 different probe tips and for SCANNING operation for continuous data acquisition, resolution 0.1 µm - Simultaneous control of all 3 axes - HEWLETT-PACKARD computer system H 382 with color monitor, floppy disk drive, keyboard, and possibly printer - ZEISS software available as follows: UMESS 300/MFT 300 with expansion package (version 1998), plus 302 Form and Position Measurement, 303 Fit Functions, 305 Automatic Operation, 307 Parameter Control Manager, and the following options: Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / Drill Pattern Program A 741 and Probe Check 99 - Mobile manual control panel with progressive control lever for continuously adjustable travel speed of all 3 axes - Probe magazine mounted on the machine, equipped with 3 probes, with automatic probe changing device - Separate electrical and control cabinet Type 608485, separate computer table, separate cabinet - Operating manuals, various measuring probes, and ball/standard measuring normal that can be fixed to the table,