Mesin bor meja

TOS VARNSDORF WH 10 CNC

Kondisi: bekas, Perpindahan sumbu X: 1250 mm Perpindahan sumbu Y: 1100 mm Perpindahan sumbu Z: 900 mm Ekstrusi spindel (W): 710 mm Sumbu B: 360° Ukuran meja penjepitan: 1000x1120 mm Beban maksimum meja: 3000 kg Kone spindle: ISO 50 Putaran spindle: 2500 rpm Daya motor utama: 20 kW Godpfox Dz Rcjx Adtsil Dimensi keseluruhan mesin PxLxT: 6130x3600x2750 mm Berat keseluruhan mesin: 12400 kg Sistem kontrol: Heidenhain iTNC 530 Aksesori: kabin operator, penutup mesin, probe pengukur TS 460, dudukan alat Jumlah jam pada spindle: 8500

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Open Cable Key features of the gantry design: - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. - 24 air bearings ensure smooth movement of all three axes. - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.) Gsdpfx Adjdyah Seteil

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, de: TOS Varnsdorf WH 10 CNC Heidenhain TNC620 / Sinumerik ONE Arbeitsspindeldurchmesser 100 / 105 mm Spannkegel ISO 50 Werkzeugaufnahme 69871 DIN Spannadapter - Schraube TOS 4100793 Hauptmotorleistung (S1/S6-40%) 22/34 kW Gsdpjpdrzzsfx Adtsil Max. Spindeldrehzahl 2500 / 3000 U/min Max. Spindeldrehmoment (S1/S6-40%) 2173/3250 Nm Querweg (X) 1250 / 1800 mm Vertikalweg (Y) 1100 / 1250 mm Längsweg (Z) 1000 mm Spindelhub (W) 630 mm Tischaufspannfläche 1000x1100 / 1200x1400 mm Max. Werkstückgewicht 3.000 / 4.000 kg Vorschubbereich 4–6000 mm/min Gesamtanschlusswert 50 kVA Maschinengewicht 13.000 kg Ausstattung Mechanik - Gehärtete Führungsbahnen auf allen Achsen - Biplast-V-Beschichtung der Führungsschuhflächen - Geometrische Genauigkeit gemäß dem Prüfprotokoll TOS Varnsdorf WH 10 - Vorschubspindel Ø 100 mm, Spindellager - FAG, SKF - Hydraulische Werkzeugspannung 22 kN – Ott-Jakob - Getriebe mit Kühlsystem – reTOS Varnsdorf - Kugelgewindetriebe in den Achsen X, Y, Z und W – KSK Kurim - Zahnkranz und Ritzel für präzise Rundtischpositionierung – reTOS Varnsdorf - Hydraulikanlage (Aggregat, Pumpen, Schläuche, Fittings) – Baseco - Rundtischverriegelung CNC-gesteuert - CNC-gesteuertes Zentralschmiersystem – Tribotec - Teleskopverkleidungen (X- und Z-Achse) Ausstattung Elektrik - CNC-Steuerung iTNC 620 Heidenhain Gen3 - Servomotoren Siemens 1FKZ 100… (5 Stück) - Spindelmotor 1PH8135… – 22 kW - Umrichter Heidenhain UM114D - Heidenhain Längenmesssysteme für X, Y und Z - Encoder Heidenhain ROD 480 für Rundtisch - Encoder Heidenhain TTR ERM für Spindel – orientalischer Anschlag - Schaltschrank von Rittal mit Kühleinheit - Verkabelung und moderne elektrische Komponenten - Endschalter Balluff - Drehbares Bedienpult - Arbeitsplatzbeleuchtung Sonstiges - Elektrischer Prüfbericht, technische Dokumentation - Zertifikat zur geometrischen Genauigkeit WH 10 TOS Varnsdorf - Spindel-Ballbar-Testprotokoll, Protokoll zur Maßhaltigkeit der Längenmesssysteme - Arbeitsraumkühlung am Spindelkopf (Behälter, Pumpe, Schläuche) - Auflage für Arbeitsspindel mit Messingbuchsen SP200 TOS Varnsdorf - Heidenhain-Optionen Nr. 8, 19 und 20 - Heidenhain-Handrad HR510 - Heidenhain-Längenmesssysteme Upgrade auf LC115-Serie für X-, Y- und Z-Achse

Kondisi: baru, Tahun pembuatan: 2025, Intern GSD One of the best-selling and most popular conventional precision lathes Distinguished by: sophisticated engineering highest precision long service life proven ergonomic design minimal footprint and extensive accessories. Proven over decades in single-part and small series production, in both craft and industrial settings, for training and professional development, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed rod protection Main spindle brake Toolroom accuracy according to DIN 8605 Two-speed brake motor Headstock gear transmission 16 fixed spindle speed levels Digital position display (optional) Gsdpewhzcpsfx Adtoil LED machine lamp TECHNICAL DATA: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Centre distance: 650 mm LATHE SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60% / 100% DC: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speed steps: 16 FEED RANGE Number: 24 Longitudinal: 0.02 – 0.63 mm/rev Cross: 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads: 0.25 – 8* mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Taper according to DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 * Inch and metric pitches 0.45; 0.75; 4.5 and 5.5 mm only possible with additional change gears. The machine is located in our showroom in 71334 Waiblingen-Beinstein and is immediately available. For equipment details, please contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Gsdovgxfyopfx Adtjil Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant supply through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools.

Kondisi: bekas, Tahun pembuatan: 2004, en-GB_001 Gsdpfotzyx Tex Adtsil

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar total: 950 mm, panjang total: 600 mm, tinggi total: 1.850 mm, kebutuhan udara: 0,9 m³/jam, kapasitas tangki: 250 l, tegangan masuk: 230 V, berat keseluruhan: 180 kg, Perlengkapan: kabin, pencahayaan, XTON SANDBLASTER™ is a premium sandblasting and glass bead blasting machine, ideal for workshops with limited workspace. The 250-liter pressure-blast cabinet operates in a closed-loop system and features a unique filtration system with an integrated dust separator. It is designed for exceptionally quiet operation, enhancing operator comfort. The unit is equipped with high-quality, grain leather gloves that are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, the unit is available in a stainless steel version upon request. EQUIPMENT: - Work table with dimensions: 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATIONS: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Mains voltage: 230 V / 50 Hz - Rated operating pressure: up to 10 bar - Cleaning performance: 25 m³/h - Cleaning class: SA-3.0 – comprehensive and thorough corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm - Nozzle material: tungsten carbide - Abrasive media valve: MIKRO II - Viewing window dimensions: 270 x 510 mm Giedpfsrl R Dlex Adtjl - Work table load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optionally stainless steel

Kondisi: bekas, Tahun pembuatan: 2007, Mesin telah secara rutin dirawat dan berada dalam kondisi teknis yang baik. Dengan sumbu-C. Rincian teknis: Diameter piringan rencana: 1600 mm Kebutuhan daya total: 80 kW Berat mesin sekitar: 25 t Kebutuhan ruang sekitar: 4,4 x 4,62 m Diameter benda kerja – maks.: 2000 mm Diameter terbesar saat facing: 1800 mm Godex Aq E Hopfx Adteil Jenis dudukan alat: ISO50

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.160 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 650 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 24 m/menit, produsen pengendali: FANUC, model controller: FANUC 0i-MD, tinggi total: 3.170 mm, panjang total: 5.500 mm, lebar total: 2.892 mm, lebar meja: 760 mm, panjang meja: 2.160 mm, beban meja: 1.800 kg, berat keseluruhan: 15.000 kg, kecepatan spindel (min.): 60 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, jarak dari tengah meja ke hidung spindel: 800 mm, daya motor spindle: 18 W, hidung spindel: ISO 40, jumlah spindel: 1, jumlah slot dalam magazin alat: 40, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Used vertical machining center “DOOSAN model DNM 750L-” with FANUC 0i-MD CNC Gsdpsw D Aynjfx Adtjil

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: Gijdou Nc Emjpfx Adtol X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed, left rotation: max. 10,000 rpm Spindle speed, right rotation: max. 10,000 rpm Distance between uprights: 2,500 mm Spindle-to-table distance (vertical): 1,230 mm Table clamping surface: 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight: approx. 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-axis gantry milling machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, type fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, type rotary table with indexing disc, for 32 tool holders Chip conveyor: 2 hinged belt conveyors, manufacturer DGS, with coolant tank, insertion length 8,500 mm Manufacturer BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil/water cooling unit for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via control panel type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with inspection windows and safety doors) Hydraulic system Work area lighting