Mesin pembungkus film

TOSA UNIBLOCK 1623/NF

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBHF-KBK1, DEMAG KBK crane system, crane runway approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical details of the system: - Crane runway made from Demag KBK1 sections - System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, power supply, brackets/hangers, etc. - Includes 1 bridge with Demag DC-COM chain hoist (125 kg capacity) The crane is disassembled and available immediately. Todjpiarnepfx Ad Rja Very good used condition, see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems available. Load capacities from 125 kg up to 1600 kg. Please inquire about your crane runway requirements, including jib load and dimensions.

Tahun pembuatan: 2000, Kondisi: baik (bekas), Barberan Laminating Line For any inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 40 mm Maximum workpiece length: 2800 mm Minimum workpiece length: approx. 600 mm Variable speed control from the brush cleaning station, maximum speed: 20 m/min. The line includes: Tsdpfx Adsilqvre Roa - Tommassini automatic loading system (non-operational) - Top and bottom brushing machine - Pre-heating lamps before upper and lower glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Calender line with steel rollers for pressing - Additionally, the line is equipped with a purchased top-side corona treater (operational) – enables single-sided lamination with PP films

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Alfa Laval centrifugal pumpe, type LKH 85/240, 25,0 kW, Rustfrit stål. Brugt! God stand! Tedohck S Espfx Ad Rea Indløb: 6" - Udløb: 6"

Tahun pembuatan: 2022, jam operasional: 400 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of Manufacture: 2022 Operating Hours: approx. 400 hrs Location: D 84069 Schierling Availability: short-term Specification: Tjdpfxert Uvzj Ad Roa - Base machine Lepton 5100 with screen decks 1 and 2 * Screen deck 1 aperture: 36 mm * Screen deck 2 aperture: 24 mm - Pre-screen deck with extended hopper and variably adjustable dosing roller - Volume measurement by loading - Pre-fitted for air separator - Compressor - LED lighting package - Radio remote control for all major settings - Diesel-electric drive, 80 kW - Axle leveling system - Twin-axle, 80 km/h type approval - Total weight: 19,000 kg - Transport dimensions: 11.97 m length, 3.98 m height, 2.53 m width * No special transport permit required Suitable for screening: Compost, green waste, biomass, root wood, waste wood, municipal solid waste, RDF, various recyclable materials (not suitable for construction rubble or excavated soil) Additional information: Very good used condition, fully operational

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2020, nomor mesin/kendaraan: PM_1000, Used polishing machine for manual processing. Todpsfiugujfx Ad Roa Drive power: 5.5 kW Polishing discs diameter: 1000 mm

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Tjdpfxeuc Idxj Ad Roa Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Scoring blade, max. diameter mm, 2.2 KW Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Cutting system for thin panels

Kondisi: bekas, Tahun pembuatan: 2017, Overview The wrapper was manufactured in 2017 by the Spanish manufacturer Movitec. It remains in operation until the end of September 2023 and can be inspected at any time. Technical data - Max. 120 pallets/h (with 10 wraps) - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm - Weight: 2,000 kg - Film width: 500 mm - Main frame made of steel - Rotary ring with dispenser for pre-stretch film - Motorized pre-stretch system - Cutting and sealing unit Scope of delivery - Safety fence Todol Uyfkepfx Ad Rsa - Wrapper | Movitec | Saturn S6 | 2017 - Compressor | Josval | EDS-900 | 2016

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang total: 30.000 mm, tinggi total: 4.300 mm, lebar total: 6.500 mm, berat benda kerja (maks.): 100 kg, suhu: 220 °C, kapasitas pemanasan: 80 kW (108,77 hp), tinggi benda kerja (maks.): 1.200 mm, panjang benda kerja (maks.): 2.500 mm, bahan isolasi: Mineralwolle 75 kg/m³, ketebalan isolasi: 150 mm, lebar benda kerja (maks.): 800 mm, The continuous system consists of the following components: - Chemical pre-treatment by spraying - Dryer - Powder coating system - Powder curing oven - Conveyor technology (indexed operation) Tsdeum Uflspfx Ad Rsa - Electrical control system

Kondisi: bekas, nomor mesin/kendaraan: IDC000031, Trommel zur Spänetrocknung Länge – 14 m Breite – 3,6 m Trocknungsleistung – 10 t/h Tedpfx Ajrl Ra Hjd Rea

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Additionally, the machine is equipped with: Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Scrap ejector integrated into pusher Foldable scrap tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training Tjdpfsuiy Ngsx Ad Rsa