Mesin pendingin

Trane RTAC 200

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.750 mm, lebar total: 2.800 mm, tinggi total: 1.830 mm, persyaratan ruang panjang: 2.800 mm, lebar yang dibutuhkan: 2.850 mm, kebutuhan tinggi: 1.900 mm, produsen motor: Bitzer, laju aliran volumetrik: 940 m³/jam, EN: Two used Bitzer screw compressor skids for low-temperature Freon applications. Both skids are supplied with a shared control panel. Originally, each skid was intended for a separate cold store, but the capacities listed in the specifications are combined. Skid 1 is fitted with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW Rsdpfx Alox Ap Hpoajt -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW DE: Zwei gebrauchte Bitzer-Schraubenverdichterskids für Niedertemperaturanwendungen mit Freon. Beide Skids werden mit einem gemeinsamen Schaltschrank geliefert. Ursprünglich war jeder Skid für einen eigenen Tiefkühlraum vorgesehen, die in den technischen Daten angegebenen Leistungen sind jedoch zusammengerechnet. Skid 1 ist ausgestattet mit zwei Bitzer HSN 7461-70-40P halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern. Dieser Skid hat ein Fördervolumen von 440 m³/h bei 50 Hz und 532 m³/h bei 60 Hz. Skid 2 wird mit zwei Bitzer HSN 7471-75 halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem WTT GmbH WP 7M-44 gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern geliefert. Dieser Skid hat ein Fördervolumen von 500 m³/h bei 50 Hz und 600 m³/h bei 60 Hz. Bitzer HSN 7461-70-40P (x2) Leistungen: -20ºC/+40ºC: 229,6 kW -30ºC/+40ºC: 157,4 kW -40ºC/+40ºC: 102,0 kW -45ºC/+40ºC: 79,8 kW Bitzer HSN 7471-75 (x2) Leistungen: -20ºC/+40ºC: 240,6 kW -30ºC/+40ºC: 165,8 kW -40ºC/+40ºC: 109,0 kW -45ºC/+40ºC: 86,0 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, 1 unit ketel uap bekas ----- - dipasang pada rangka - - dengan economizer terintegrasi - Pabrikan: LOOS, Gunzenhausen Tipe: UL-S 3200 Kapasitas: 3.200 kg/jam Tekanan operasi yang diizinkan: 13 bar Rjdpfxexnxdhe Alaet Tekanan uji yang ditingkatkan: 24,7 bar Isi air penuh sekitar: 4.830 l Tahun pembuatan: 10 / 2006 Tanda CE: CE 0036 Dilengkapi dengan pembakar gas/oli Weishaupt GL9/1-D/TMD, panel kontrol terpisah, pompa air umpan, dan fitting kasar dan halus yang tersedia. Economizer terintegrasi tipe Eco1: Tekanan maks. yang diizinkan: 31 bar Tekanan uji: 56 bar Suhu maks. yang diizinkan: 238°C Kapasitas panas: 124 kW Volume total: 81 ltr

Kondisi: bekas, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar Rjdouif Iuepfx Alast max. 110 degrees Celsius 60 m³/hour 20.2 m head n 2900 rpm This offer is directed exclusively at commercial customers as defined by §14 of the German Civil Code (BGB). No sale to private individuals.

Kondisi: baik (bekas), Diesel engine, drive motor, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Quantity: 2 injection pumps available Rodpfxjh It Trs Alajt -Price: per unit -Dimensions: 460/215/H325 mm -Weight: 32 kg

Kondisi: bekas, System: used piston diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa Rjdpfjdkdi Tsx Alast

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), kapasitas pendinginan: 56 kW (76,14 hp), jenis pendinginan: air, frekuensi input: 50 Hz, kapasitas pemanasan: 67 kW (91,09 hp), jenis bahan bakar: gas, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Engine: Nissan FY5 Power supply: 230 V AC, 1 phase, 50 Hz Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Redpjd Tiu Eofx Alaet Refrigerant: R407C, 17 kg Design pressure (high side): 30 bar Design pressure (low side): 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Kondisi: siap digunakan (bekas), Bitzer compressor unit Type: HSK 6461-60-40P (x3) Flow rate: 165 m3/h (x3) Cooling capacity for R404A: 426 kW at 0°C/40°C, 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3550 x 1050 x 1880 mm Rjdpfotqcqaox Alajt Refrigerant receiver included Stock status: 2 units Stock number: Z77 Condition: Used

Kondisi: siap digunakan (bekas), CAP30 APPLICATOR 1000 HELICAP23: Tahun Pembuatan: 2016 Versi: 300V Rodpfx Aow Nqn Nolaot Jam Operasi: 15.600 Harga: 150.000 EUR FCA Polandia Mesin beroperasi hingga 20 September. Kondisi sangat baik Kondisi sangat baik, siap untuk dikirim.

Tahun pembuatan: 1991, Kondisi: hampir baru (bekas), berat keseluruhan: 1.420 kg, kecepatan rotasi (maks.): 1.485 rpm, 3 pcs stainless steel volute casing pumps in process design 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! The pumps were operated on a test bench and all have very low operating hours! See pictures! Flow rate: 1001 m³/h (278 liters/second) Delivery head / pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: single-acting mechanical seal with flush water Manufacturer: Burgmann Impeller type: closed radial impeller Impeller diameter: 324 mm Bearing type: rolling bearing Lubrication: oil Lubricant monitoring: oil level controller Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Cover plate: 1.4408 (AISI 316) Shaft: tempered steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: gray cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Redpfxjqabiae Alaot Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Baseplate: painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Degree of motor protection: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Rodpfx Aog Ezarslast Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.