Mesin Pembengkok Mandrel Transfluid DB 2060 S

Transfluid DB 2060 S

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device Bljdpfx Aed Ab H Hjbhoc • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baru, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Dorne-lengte ----- 1 000–∞ Gewicht ----- 5000 kg Machinedimensies ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1800 mm/sec Tolerantiegraad ----- 0,05°/mm Blodpfega T E Aex Abhjc Standaardcomponenten volgens VDMA-, ISO- en DIN-normen OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering, elektromagnetisch of optisch * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, en-1 Bedpow An Uhefx Abhslc

Kondisi: bekas, Tahun pembuatan: 2016, Overview This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The line is fully equipped, in very good technical condition, and shows only minor signs of use. The system is still installed and connected, and can therefore be inspected in person at any time. Technical Specifications Output: 60 bags/minute Doypack/flat pouch formats: 20/25g, 50g, 300g, 500g, 750g Micro-dosing capability for powders Modern wide zipper/belt Scope of Supply - Doypack packaging machine | Volpak | SI-280 F1 - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing units between the discharge stations, the mixer, and the multihead weigher - Ishida X-ray inspection system with reject function, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject system - System for the injection of nitrogen or other inert gases, including a measurement system - Dust extraction system - Euro-slot punch Bodpfxjtz H T Dj Abhjlc - Smooth sealing system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, The machine is in excellent condition, having performed only 123,000 operations. CNC-controlled automatic system, designed for processing welded frames. Independent drive and control system. Multiple use of the same cycle time Operates in conjunction with a welding and cleaning line Does not require additional floor space in the workshop After adaptation, it can operate in a sash production line. All operations are performed during the cooling phase: - Water drainage - Ventilation, grooves - Ventilation, drilling in colored profiles - Mullion connector drilling in the frame - Hinge hole drilling in the frame (x6) The center is equipped with its own system for transporting frames from the welder to the cleaner. Bledpfom Ak R Uox Abhoc SPS and NC controls. User-friendly visualization.

Kondisi: baru, Tahun pembuatan: 2024, EX DEMONSTRATION MACHINE ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with Coolant Device B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine light Standard features: Mushroom emergency stop button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch Stepless speed adjustment, digital speed display, Bsdpsd Hy Elsfx Abholc feed overload protection, protection class IP54, plug connector Spindle guard with electrical interlock Technical data: Drilling capacity in steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M24 Cast iron EN-GJL-200 (GG20): M30 Short spindle taper: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117 / 701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Kondisi: bekas, Tahun pembuatan: 2000, Kabel panel kontrol telah dipotong, oleh karena itu harga dikurangi. Bedpfx Abjx N R U Dsholc

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Gebrauchte Haeger 412 Einpressmaschine Blech-Einlets, Bolzen & Muttern – Selbstsichernd zu verkaufen. Inklusive Werkzeug und J-förmigem Unterwerkzeug. Bljdpewbhipsfx Abhsc

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1994, gaya penekanan: 80 t, Perlengkapan: penghadang cahaya keselamatan, Manufacturer: Amada Model: ITS 80-25 Year of manufacture: 1994 Pressing force: 80 t Bending length: 2,500 mm Stroke clearance: 400 mm Stroke: 100 mm Power: 9.5 kW Bodpfx Abovncifshslc Overall dimensions: 3,010 x 2,230 x 2,230 mm Weight: 4,950 kg

Kondisi: baru, Tahun pembuatan: 2025, Based on our many years of experience in service, we decided to develop and manufacture our own milling machines. The FPS 500M is a conventional milling machine, perfect for training and production environments. The Heidenhain Positip 8016 Aktiv digital display allows for precise positioning, such as creating and approaching bolt hole circles. Control System Heidenhain Positip 8016 Aktiv – Digital Readout Spindle Speed 0 – 3000 rpm, geometrically stepped direct-drive gearbox with 16 speed settings for maximum torque and milling performance Feed 0 to 500 mm/min, infinitely variable Rapid Traverse 1.5 m/min Quill Extendable quill, vertical travel 80 mm, SK40 Optional: horizontal work spindle or extendable horizontal quill (approx. 100 mm travel) Tool Clamping System: Hydraulic drawbar – DIN 69872 Optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Fixed angle table 800 x 480 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Attached chip tray • Machine lamp • Centralized lubrication • Z-axis bellows Options Bodpfx Ash Su Ipjbholc • Universal table • Rotary table • Slotting attachment • Dividing head • Steady rest • etc. Further technical data can be found in the attached data sheet.