Mesin pembengkok tabung

TRANSFLUID DB618

Kondisi: baru, trans_001 Cpedpfx Ajxaa Sdjbheu

Kondisi: baru, rohrdurchmesser-maschinenbeschreibung Cpjdpfxoxab E Se Abhou

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of pipe geometries with bending radii from 1.5 x D → Maximum bending capacity for pipes: 42.4 x 3.25 mm (steel, max. Re 240 N/mm²) → Maximum bending capacity for pipes: 30 x 30 x 3 mm → Maximum bending capacity for pipes: 42.4 x 2 mm (stainless steel, max. Rp0.2 260 N/mm²) → Total connected load: 3 kW → Pipe feed length: approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display enables easy and intuitive programming and operation of the machine. After the pipe is fed in, it is clamped in the carriage by the chuck, allowing for precise positioning of the pipe and, thus, the creation of dimensionally accurate geometries. The standard configuration also includes pipe geometry verification before the bending process: if the bending process is started at an incorrect position, the machine will not allow operation. This eliminates operator errors. Optional additional features provide increased convenience and boost the output and efficiency of the system. Data exchange with the optional TBS-3D pipe calculation program (PC version) is handled via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → Servo drive for the bending axis 1.5 kW → Adjustable speed → Left-hand bending direction → Bending angle resolution: 0.1° → Maximum bending radius: 120 mm → Bending shaft diameter: 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the pipe in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic pipe clamping with adjustable clamping pressure → Programmable mandrel pre-retraction Cpsdpfx Abetr U Hlshju PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot pedal operation → Data transfer via LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control system calculates feed values and bending angles immediately upon input of length and angle. Power supply: 400V 16A Dimensions: L:2.3m x W:1m x H:1.4m Weight: approx. 1200 kg

Kondisi: sangat baik (bekas), Four-sided planer Weinig Unimat 23 EL Working width: 230mm Working height: 160mm Spindle configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Variable feed speed via variator: 6-36 m/min Feed driven by cardan shaft Table with powered rollers Pneumatic pressure elements Codpfx Ajrb An Usbhjpu CE certificate Year of manufacture: 2003

Kondisi: bekas, Tahun pembuatan: 2017, Number of spindles: 5 pcs Cpodewwl Nljpfx Abheu Working width: 240 mm Planing height: 120 mm Surfacing table length: 2,500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3,500 kg Control system: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles motorized for width and height adjustment - With workpiece return to the operator 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd Spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorized width adjustment 4th Spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorized height adjustment 5th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including available used cutterheads (Technical specifications according to manufacturer – no guarantee!)

Kondisi: siap digunakan (bekas), panjang total: 5.500 mm, lebar total: 1.400 mm, tinggi total: 1.000 mm, berat kosong: 600 kg, Mesin pembengkok pipa untuk pipa: diameter 6 – 48 mm untuk material padat: maks 30 mm, dengan alat untuk diameter pipa 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm. Maks diameter pipa x ketebalan: Ø 6 – 48 mm (45 kg / mm²). Radius pembengkokan maks: 180°. Cjdjxcqi Eepfx Abhspu

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of metallic and non-metallic workpieces. These machines feature a large screening surface and allow for easy separation of workpieces from abrasive media. Cpjdpfx Ajn Smcljbhju Optional Accessories - Pneumatic sound enclosure - Pneumatic flap control - Frequency converter - Dosing pump - Solenoid valve - Stand for control panel - Rinsing tube (various types) The images are for reference only. Optional accessories are available at an additional cost.

Kondisi: baru,

Kondisi: baru, Tahun pembuatan: 2026, Ganz gleich, welche Schnittaufgabe Sie haben – die A700 ist die einzige Säge, die Sie jemals benötigen werden. Mit der größten Schnittkapazität ihrer Klasse und einem enormen Gehrungsbereich von ±75° ist sie für echte Hochgehrungsschnitte ausgelegt, ohne Kompromisse bei der Größe der zu schneidenden Aluminiumprofile einzugehen. Ideal auch für das Bündelschneiden mehrerer Profile gleichzeitig und hochpräzise. Hochgeschwindigkeits-Aluminiumverarbeitung mit präzise geregelten Bewegungsabläufen durch eine PLC-Steuerung. Pneumatisch betätigte Schutzhaube, die sich per Knopfdruck öffnet und schließt – für einen vollständig freien Zugang zum Sägetisch. Sicherheitsschalter, der die Säge beim Anheben der Haube deaktiviert. Optional CNC-gesteuerte Gehrungseinstellung der Säge mit Touchpad-Bedienung. • Ø700 mm Hartmetall-Kreissägeblatt mit 4 kW Antriebsmotor • Nach AS / NZS 4024:2014 Sicherheitsstandard, Zweihandbedienung beim Sägeschnitt • Überkopf-Schutzhaube mit Sicherheitstunneln, jeweils 900 mm beidseitig der Säge • Schutzhaube pneumatisch auf Knopfdruck anhebbar • Sicherheitsschalter schaltet den Sägebetrieb beim Anheben der Haube ab • 2x vertikale und optional 2x horizontale Spannzylinder mit einstellbarem Spannungsdruck Cpedpfx Asmb U Tusbhju • Gehrungsbereich ±75° mit Rastpunkten bei 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Dosier-Schmiersystem für das Sägeblatt • Luftdüse und LED-Innenbeleuchtung • 2× Ø100 mm Anschlussstutzen für Späneabsaugung • Optional 2,2 kW Späneabsauganlage • Optional automatisches Gehrungseinstellsystem Besonders geeignet für: • Serienfertigung von Aluminium • Herstellung von gehrungsverschweißten Aluminiumkonstruktionen • Herstellung von Fenstern und Türen • Fertigung von Rollläden, Jalousien und Möbel • Herstellung von einbaufertigen Aluminiumrahmen und -konstruktionen • Produktion von Aluminiumfassaden

Kondisi: baik (bekas), Tahun pembuatan: 1996, Pipe diameter 6 - 28 mm Wall thickness 2 mm Bending radius min. 2 x D Control system IPU 20 Bending radius max. 5.0 x D mm Max. bending angle 190° Mandrel length 3000 mm Operating pressure 180 bar Hydraulic motor 4 kW Machine weight approx. 900 kg Space requirement approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 preset bending angles and display in the control panel for angle specification, angle detection and angle measurement via absolute value rotary encoder, automatic tool table reset, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: manual and semi-automatic. Control buttons: hydraulic on/off, operating mode selection, clamp close/open, feed forward/back, mandrel forward/back, bend forward/back, lock forward/back, mandrel lubrication, rotation device forward/back, table reset, length stop forward, emergency stop. Cpedpfx Aevtgn Njbheu The machine comes from prototype production and was only lightly used until 2000. Afterwards, the machines from this department were sold. However, the purchaser did not use the tube bending machine, so it has only been stored since then and has not been in operation (original paintwork). Machine offered at a special low price! This is a used machine; therefore, sale is made excluding any warranty. STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM.