Konveyor rol dengan jarak rapat antar rol

Transnorm 3800-900-855

Kondisi: baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Bobst SP 142 ER Year 1987 Max. sheet size: 1020x1420 mm Min. sheet size: 700x520 mm Ffsdpfsvhcgqex Aagsw Max. speed: 6,000 sheets/hour Max. cutting force: 600 t Centerline system Micrometric adjustment Currently in production

Tahun pembuatan: 2006, Kondisi: baik (bekas), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Inspected and tested. Ffedpfxodtr A Te Aagsw

Kondisi: bekas, Tahun pembuatan: 1988, Bobst Flexo 1604 printing press, four-color, bottom printing, anilox rollers 120l/cm and 80l/cm Bobst Transfer BOBST SPO 1600 flatbed die-cutter, max format 1100 mm x 1600 mm / 43.3" x 63" with four printing units plus bottom MPA, sheet feeder with conventional roller transport - Anilox rollers 120l and 80 lines - Open steel doctor blade chamber - Vacuum feeder - Die-cutting section - Waste stripping section - Centerline II Ffjdpfov Ifpuex Aagsw - High-pile delivery with two elevating tables - Max sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Min sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Cutting force: 400 t - Materials: E, B, C, CB, BE flute - Maximum speed: 6,000 sheets/hour Possibility to sell the machines separately.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 52.000 kg, gaya punching: 600 t, kebutuhan tinggi: 3.520 mm, persyaratan ruang panjang: 12.150 mm, lebar yang dibutuhkan: 9.340 mm, Machine for Die Cutting, Embossing, Waste Stripping, and Blank Separation Used machine, overhauled at QTM Schwalmtal System equipped with high-performance sheet feeder designed for NON-STOP operation ⦁ For fully automatic die cutting, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as side and rear sheet edges ⦁ For stacking of die-cut and stripped sheets with attached gripper edges ⦁ For separating gripper edges and subsequent stacking of remaining sheets ⦁ With patented gripper carriage registration system for maximum register accuracy ⦁ With package stacker enabling fully automatic separator sheet feeding and NON-STOP stacking, without the need for adjustment even for the smallest blanks (exchange table with comb structure) ⦁ Separator sheet magazine with electronic stock monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet changing device at delivery ⦁ Modem ⦁ Standard machine height increase by 600 mm Specification Maximum sheet size: 1060 x 1450 mm Minimum sheet size: 500 x 700 mm Maximum die cutting force: 6.0 MN (600t) Speed: 8,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 5 mm (max. sheet warp 4%) Equipment: Patented QTM rail system Manual non-stop feeder Stripping station Blank separation station Centerline Fully automatic pallet changer at delivery Fodpfx Aast E Nthegofw Including platform Control upgrade to Siemens S7 Completely overhauled machine drive Quick-lock frames in all tooling stations

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring Ffedsg Ezaropfx Aagew - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Tahun pembuatan: 2025, Kondisi: baru, RS-9 was specifically designed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine being operated. The shredder allows fast and safe shredding of paper, which is taken directly from the die-cutting machine, to enable easy transport to the baler via a conveyor system. The RS-9 shredder is designed for shredding waste from a die-cutting machine for easy transport via a belt conveyor system. Ffedpjiklxbofx Aagjw Our shredder is very easy to operate. It features Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 offers the ability to retract the shafts, which ensures operator safety and extends the device’s service life. The machine is equipped with a frequency inverter enabling soft start and motor operation control. Feel free to contact us.

Kondisi: baru, laju aliran volumetrik: 0,984 m³/jam, Atlas Copco G7FF 500 L Screw Compressor, NEW Specification: • Condition: New • Manufacturer: Atlas Copco • Output: 984 l/min • Main motor power: 7.5 kW • Receiver tank: 500 l • Max. working pressure: 10.0 bar • Integrated refrigerated dryer • Electronic compressor parameter settings • Soundproof cabinet (only 67 dB) • CE compliant • User manual in Polish • Weight: 227 kg Additional information: Fodjhkttpopfx Aagofw • Manufacturer’s warranty available upon commissioning by an authorized Atlas Copco service partner • Available within 7 working days

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), A flexographic printing, slitting, die-cutting, and gluing line with bundle ejector (Flexo Folder Gluer) for the production and processing of corrugated board by DY Machinery is available. Processes: feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet feed X/Y: 1200mm/2750mm, max. print area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total machine weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed display, and alignment unit. 2) Top-side flexo printing with nip roller feed, ink stop sensors, and automatic cleaning. 3) Creasing and slitting unit with trim and glue flap knives, slitting blade thickness: 8mm. 4) Rotary die cutter with polyurethane anvil and soft die-cutting system, die-cut dimensions: +/-25mm. 5) Downward folding and gluing unit with VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) ACCS-2000 central control system with an order memory capacity of 100,000. The entire line features remote control for flexo stations, folding and gluing unit, and bundle ejector. Documentation is available. Inspection on site possible. Expected availability from October 2025. Ffsdpfsu S I D Rex Aagow

Tahun pembuatan: 2021, Kondisi: baru, nomor mesin/kendaraan: 2021041406, Aluminum incline conveyor with supporting frame Dimensions: approx. 2000 + 2000mm Discharge height: 1600mm (example) Height of the horizontal section: 200mm (example) Conveyor belt: green, 2-ply, particularly cross-stable, endless spliced with stepped joint * Antistatic due to threads in the underside fabric Drive, motor control optional Ffedpfx Aog Ez I Hoagjw Stainless steel hopper - material infeed

Kondisi: bekas, Tahun pembuatan: 1988, nomor mesin/kendaraan: 14068, Stapelwender / Pile Turner DOX 3000 M Baujahr 1988 – Seriennummer 7356 Fsdpsh Axkvjfx Aagsfw Format / max. Größe: 720 x 1020 mm Online-Video-Inspektion per Skype-Video möglich Wir würden uns sehr über Ihren Besuch freuen – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerstandort: Emskirchen / Nürnberg – Test vor Ort möglich