Mesin pengukur

TRIMOS V 1002+

Kondisi: diremaj di bengkel (bekas), Modernized machines with new LTG control system StoreControl L External dimensions: Construction height: 6,000 mm Construction width: 1,630 mm Construction depth: 2,980 mm 30 carriers, each with a load capacity of 500 kg Usable (clear) dimensions per carrier: Width: 1,300 mm Depth: 863 mm Height: from 50 mm to 750 mm Total load capacity up to 40,000 kg Start of access opening at 870 mm above finished floor level, access opening height 845 mm Color scheme: GREY / BLUE, carriers sendzimir-galvanized Ksdpfxjn D A Rrs Aahonf Surface cleaned, signs of use possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manual lift door Subject to errors, technical modifications, and possible deviations from photos. Delivery & installation currently mainly in Germany, Austria, and neighboring countries.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, kedalaman pengeboran: 1.250 mm, panjang total: 8.100 mm, lebar total: 6.300 mm, tinggi total: 4.300 mm, berat benda kerja (maks.): 7.000 kg, berat keseluruhan: 31.000 kg, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan spindel (maks.): 6.000 rpm, diameter bor: 36 mm, 4-Seiten-Komplettbearbeitung Schwenkbare Bohr- und Fräseinheit DCM Dynamische Kollisionsüberwachung CAM-Modell QCK (Quick Check Kinematics) Transferbohrzyklus (380-382) 90 Bar IKZ-Kühlsystem Zusätzlicher ATC-Turm 24-fach (4 x 6) HSK 63 Doppel-Spindel-Mutter-Konstruktion Sauberwassertank 1.650 L und Abwassertank 1.300 L Späneförderer Max. Bohrdurchmesser Stahl: 36 mm Bohrtiefe: 1.250 mm X-Achse Verfahrweg: 1.600 mm Y-Achse Verfahrweg: 1.250 mm Z-Achse Verfahrweg: 1.100 mm W-Achse Verfahrweg: 1.600 mm Tischbelastung: 7.000 kg Tischgröße L x B / oder Ø: 1.500 x 1.100 mm Spindelaufnahme: HSK-63Mk Spindelleistung: 23 kW Drehzahlen / Bereiche: 6.000 U/min Ksdpovn Sv Usfx Aahenf Länge: 8.100 mm Breite: 6.300 mm Höhe: 4.300 mm Gewicht: 31.000 kg

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: Heidenhain, model controller: TNC640, Technology: Direct drive Speed: 12,000 rpm Power: 20 kW Torque: 128 Nm Tool holder: SK 40 Tool changer: 40 positions Working area Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 650 mm Fixed table (X/Y): 1,100 x 600 mm Table load capacity: 1,100 kg Miscellaneous Rapid traverse (X/Y/Z): 36/36/32 m/min Equipment Chip management: Hinged belt conveyor Coolant management: Internal coolant supply 20 bar Kodpetpm Stefx Aahjnf Coolant filtration: Oil separator Electrical cabinet cooling: Air conditioning unit Workpiece measurement: Renishaw OMP 40

Kondisi: bekas, tsl_001 Knjdpfx Asxcvqneahef

Kondisi: bekas, Tahun pembuatan: 2000, Swing diameter over bed: 520 mm Swing diameter over cross slide: 480 mm Turning length: 3,000 mm Control: Siemens 840 D Number of tool stations: 12 Driven tools - number: 6 Spindle bore: 103 mm Knedpfx Aewp S Sqeahof C-axis: yes Scope of delivery - Basic machine: SINUMERIK 840 D 3 controlled axes Swing diameter over bed: 520 mm Swing diameter over cross slide: 480 mm Turret with 12 VDI shank holders, Ø 50 mm Single-stage AC main drive, 53 kW, 50% duty cycle Speed range: 30 - 3,000 rpm Main spindle head size 8 Clamping actuator for clamping devices Chip conveyor TURNING LENGTH: 3,000 mm 12 VDI shank holders DIN 69880-50x78, of which 6 positions can be equipped with driven tools, power: 6 kW at 60% duty cycle, speed range: 20–2,500 rpm 2 gearbox speeds C-AXIS Speed range: 0–20 rpm Max. programmable angle: 9999.999° Working area as per workspace diagram POWER CHUCK 3 NHF 315-82 A8 Mfr. FORKARDT with centrifugal force compensation Outer diameter: 315 mm, bore: 82 mm with hard top jaws, ground, bar material max. Ø 63 mm including draw tube and mounting

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet Knjdpfx Aaovambcehsf About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.

Tahun pembuatan: 2001, Kondisi: bekas, Detail Teknis: Knedpfx Aasikbtnehof Perjalanan-x: 400 mm Perjalanan-y: 300 mm Perjalanan-z: 500 mm Luas bidang penjepit meja: 400 x 300 mm Kapasitas beban meja: 50 kg Kontrol - semi otomatis: LASERSOFT 3D Daya laser: 100 W Total kebutuhan daya: 27 kVA Berat mesin kira-kira: 2,5 t Kebutuhan ruang kira-kira: 3 x 3,5 x 2,8 m Mesin Laser CNC untuk Gravir/Penandaan/Kontur Sekitar 9.000 jam menyala, sekitar 5.500 jam kerja

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, 1 Knsdpfot Rwlpsx Aahef

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Grinding area: 2000 x 900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle centre: 845 mm, magnetic chuck dimensions: 2000 x 800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500 x 100 x 203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. Inspection on site is possible. Knodjuyk N Iepfx Aahof

Kondisi: baik (bekas), Tahun pembuatan: 2004, Control: TRAUB SYSTEM TX8H Knedpjwwl Iujfx Aahef Weight: 3,500 kg Dimensions (L x W x H): 3,960 x 1,640 x 1,800 mm Power: 11 kW Spindle speeds: 5,600 / 4,000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe was designed for the following machining of workpieces with a turning length of 450 mm: - For cutting metal and plastics with defined cutting edges using suitable tools - For clamping in chuck sizes 160 to approx. 250 mm - For machining bar stock up to Ø 42 mm or 65 mm - Includes EHS special design part removal unit - Extended chip conveyor: 800 mm Technical data Machining area - Spindle bore: 42 mm - Spindle nose: DIN 55026, size A5 - Chuck diameter: 160-175 mm / 200-250 mm - Max. turning diameter: 275 mm - Cross slide travel over center: 35 mm - Max. turning length: 450 mm - Swing over cross slide: 395 mm - Swing over bed: 520 mm Tool turret - Tool mounts for cylindrical shank DIN 60880: 12 pcs - Shank diameter: 30 mm - Tool cross-section: 20x20 mm - Index time for 1 station: 0.5 sec - Index time additional stations: 0.15 sec Feed drives X-axis: - Travel: 210 mm - Feed force: 5,000 N - Rapid traverse/traverse speed: 15 m/min Z-axis: - Travel: 450 mm - Feed force: 6,000 N - Rapid traverse/traverse speed: 18 m/min Y-axis: - Travel: ±35 mm - Feed force: 6,000 N - Rapid traverse/traverse speed: 10 m/min C-axis: - Speed: 100 rpm - Torque: 140 / 196 Nm - Electric resolution: 0.001° Tailstock - Quill diameter: 70 mm - Quill stroke: 60 mm - Fast retract stroke: 280 mm - Quill force at 55 bar: 8,600 N - Taper according to DIN 228: Mk 4 Steady rest - Clamping range: 8 - 95 mm Parts catcher - Max. part length: 250 mm - Max. part weight: 3 kg