TRUMPF TRUPUNCH 3000 (S11)

TRUMPF TRUPUNCH 3000 (S11)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, gaya punching: 18 t, tinggi total: 2.252 mm, ketebalan lembaran (maks.): 6 mm, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.250 mm, produsen pengendali: BOSCH, model controller: MTX CMP70, panjang produk (maks.): 6.500 mm, This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It is equipped with a Bosch MTX CMP70 controller, offering X/Y axis travel of 2500 / 1250 mm and can process sheet weights up to 160 kg. The machine is fitted with a linear tool magazine featuring 18 stations and comes with advanced features such as MultiTool, MultiBend, and thread forming capabilities. Take the opportunity to purchase this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for further information on this unit. • Maximum sheet weight: 160 kg • Performance: • Punch strokes (E = 1 mm): 1,000 strokes/min • Marking strokes: 2,500 strokes/min • MultiTool tool change time: 0.3 s • Power consumption: • Standby with automatic shutdown: 0.3 kW (average) • During production: 5.6 kW (average) • Equipment & Features: • MultiTool function • MultiBend function Ncodpfx Aljx D Dkljksr • Thread forming function with tool breakage monitoring • Surface marking/embossing function • Deburring and roller technology • Tool magazine: Linear, 18 stations • Documentation: TruPunch 3000 documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 18 t, jangkauan kerja: 30.001.500 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.600 mm, Dijual Mesin Punch CNC Trumpf 3000 format besar bekas yang sangat terawat dan telah melalui servis penuh Pabrikan: TRUMPF Tipe: TruPunch 3000 (S11) Tahun: 11/2012 Area kerja: 3000 x 1500 mm - tanpa reposisi Njdpfx Aloxrnggokocr Rentang kerja sisi silang (sumbu X): 3000 mm Rentang kerja searah (sumbu Y): 1600 mm Kedalaman tenggorokan besar: 1600 mm Lengkap dengan kemampuan multi alat Tipe: S11 Video tersedia atas permintaan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet size: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Ncodpfxexn Tywo Alkjr Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 strokes/min, Marking: 2,500 strokes/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / high-speed embossing - Deburring and roller technology - Adaptive stroke calibration - Punch slug break monitoring - Lowering die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Position pin outside, left outer position STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guide for high-precision machining - Linear tool magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts bin - Scrap bin - Automatic shut-off mechanism - Transport and installation device - Position pin (right side inside) - Footswitch for clamp closure Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punches - Extraction of punch slugs - Forming - Manually adjustable pressing force - Stroke counter for punches - Level monitoring for thread cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - 17" touchscreen operator panel - NC program management - Integrated technology data - Teleservice via internet - Integrated e-shop - Production planning - Programming - Advanced shop floor programming - Data transfer - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2014, jam operasional: 35.418 h, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 18 t, ketebalan lembaran (maks.): 6 mm, panjang pemakanan sumbu X: 2.500 mm, panjang umpan sumbu Y: 1.250 mm, HIGHLIGHTS - Last maintenance in February - Punching head: stripper holder and seals were replaced - Lower clamping piston was replaced Ncodswu Evyopfx Alkjr - C1K encoder and the needle bearing were renewed - All wear parts and maintenance points completed TECHNICAL DETAILS Max. punching force: 180 kN Working area: 2,500 x 1,250 mm Max. sheet thickness: 6.4 mm Control: Bosch MTX CMP70 Tool system: 18 tool stations, with 2 clamps Part chute: 500 x 500 mm Hydraulic single-tool holder: 360° rotation Programmable hold-down: active / passive / reposition MACHINE DETAILS Operating hours: 35,418 h (as of 28.02.2025) Space requirements: 6,500 x 6,000 x 2,230 mm Machine weight: 9,800 kg Total connected load: 18 kVA EQUIPMENT - Sturdy, easily accessible C-frame - Linear magazine for tool stations - Foot switch for clamp closing - Servo-electric punching head - Spray lubrication for punches - Punch slug extraction - Adjustable hold-down force - 17" touch screen - Remote service via Internet - Automatic shutdown - USB interface - CE marking - Multi-beam light curtains - Hydraulic quick shut-off - Multitool function - Deburring and roller technology function - Thread forming function - Engraving tool function - Marking / fast bead function - Part chute sensor - Vibration-dampened installation

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg Ncodpfx Alot Hw Iiskjr E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 5.899 h, A géphez tartozó egyéb gépek és szerszámok: - A géphez tartozó szerszámok (a listát igény esetén elküldjük) - Quick Sharp - Multiset ITM ALAPGÉP: TruPunch 3000 nagyméretű kivitel (S11) Gép:  C-keret  Koordináta vezetősín  Lineáris tár 24 pozícióval prések és szerszámok számára  Hidraulikus leszorítók (3 db)  Karbantartást nem igénylő, háromfázisú szervomotoros hajtások  Átpozícionáló egység programozható leszorítóval  Leszorítók zárására szolgáló lábkapcsoló  Alkatrészkiadó csappantyú  Szállítási és összeszerelési tartó Lyukasztófej:  Szervo-elektromos lyukasztófej  Forgatható egyes szerszám adapter  Manuálisan állítható leszorítóerő  Programozható leszorító pozíció  Szerszámhossz kompenzáció  Szórópisztolyos kenés a lyukasztókhoz  Vákuumos hulladékeltávolítás  Domborítás  Löketszám szabályzás  Szerszámkenés szintellenőrzéssel Vezérlés:  TRUMPF vezérlés Bosch Rexroth IndraMotion MTX alapon  17"-os TFT kijelzős vezérlőpanel  Integrált technológiai adatok Ncedpswm Shaofx Alkor  Távszerviz-csatlakozás interneten keresztül  Automatikus lekapcsolás  NC programkezelés  Gyártási terv Adatátvitel:  USB és hálózati csatlakozás  RJ45 hálózati csatlakozó Munkavédelem:  CE jelölés  Többsugaras fénysorompók  Gyors meghajtóleállítás Kibővített szériafelszereltség:  1. index tüskepozíció: jobb oldali belső  Golyós asztalok  Kész alkatrész konténer  Forgácskonténer SZOLGÁLTATÁSI CSOMAGOK: 2. Produktivitási csomag  MultiTool funkció  Alkatrészkiadó szenzor  Szerszámszint figyelő szórókenés 3. Lyukasztási minőség csomag  MultiShear funkció  Sorjátlanítás és görgős technológia  Adaptív lökésszám kalibráció 4. Domborító csomag  Menetvágás törésfigyeléssel  Jelölés/gyors domborítás funkció  MultiBend funkció  Magasságállítású leszorítók 5. Gravírozó funkció 6. Smart Punch Monitoring 7. Vezeték nélküli működtető pont 8. MobileControl alkalmazás 9. 21 db RTC kazetta + SZERSZÁMOK!

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Daya potong maks.: 220kN, daya laser: 3200W, sambungan nitrogen: 30bar, sambungan oksigen: 20bar, daya terpasang: 76kVA, jam operasi awal 2025: 67.766 jam, dengan laser Trumpf TLF 3200 dan pendingin RIEDEL L 15/21 TR3/19.00, refrigeran: R134a, berat pengisian: 11,5kg, tekanan tinggi: 20,2bar. Alat tambahan tersedia. Pemeriksaan di lokasi memungkinkan. Nodpfx Alsw Uk A Rjkscr

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, de Ncjdpfxjwwzudj Alksr

Kondisi: bekas, Tahun pembuatan: 1997, Hydraulic press brake manufactured in 1997 in England, at the EDWARDS PEARSON factory. The press brake is in good condition and is sold complete with tooling. It has always been serviced and maintained on schedule. The machine is currently connected and can be tested or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Pressing force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: automatic X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other details: Recently fitted with a new screen and keyboard for more convenient operation. If you have any further questions, we would be happy to answer them. Njdpjrfx Utjfx Alkecr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Data teknis: Tekanan 10 bar Aliran udara 1080 l/menit Tegangan 400 V Daya penggerak 7,5 kW Berat 431 kg Tingkat kebisingan 63 dB(A) Outlet udara 3/4" Dimensi (PxLxT) 1950 x 690 x 1700 mm dengan pengering pendingin terintegrasi, pembuangan kondensat otomatis, pemisah oli-air Nodpfxexq Elwj Alkecr