CNC mesin grinding silindris

TSCHUDIN SL105U

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Iiedpfjxy Tmnox Alcob Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: baik (bekas), Robot industri Produsen: Kuka Tipe: KR6, KR6-2, KR6arc Tipe: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Semua tipe dengan kontrol KRC2ed05 Kuka KR6 KRC2ed05 tahun produksi 2006 Kuka KR6-2 KRC2ed05 tahun produksi 2011 Kuka KR6arc KRC2ed05 tahun produksi 2006-2007 = beberapa unit tersedia di stok Kuka KR16L6 KRC2ed05 tahun produksi 2009 Kuka KR16L6-2 KRC2ed05 tahun produksi 2011 Kuka KR16 KRC2ed05 tahun produksi 2007-2009 = beberapa unit tersedia di stok Iedpfstuc U Rjx Alcoib Kuka KR16-2 KRC2ed05 tahun produksi 2010-2012 = beberapa unit tersedia di stok Kuka KR16-2 Speed KRC2ed05 tahun produksi 2012 = beberapa unit tersedia di stok Kuka KR16-2 Foundry KRC2ed05 tahun produksi 2012

Kondisi: baik (bekas), Tahun pembuatan: 2008, - Maximum turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: Iiodpfxexmirgo Alcsb - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Machine weight approx.: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full-stroke cylinder for partial hollow clamping, maximum draw tube bore Ø 100 mm - In-process measuring system Renishaw for X/Y/C axis - Programmable CNC tailstock on W axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° - ICS / Internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for the use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° - Hobbing software for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm Iiedpfx Aeqt Dmyslcob - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: bekas, Tahun pembuatan: 1992, kecepatan spindel (min.): 7.500 rpm, kecepatan spindel (maks.): 24.000 rpm, 4 motor-driven grinding spindles (liquid-cooled, sealing air / oil mist lubrication) including the REFU HF converter, suitable for example for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032, 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter / inverter for supplying the motor spindles GMN tool spindle motor grinding spindle The spindles are fully functional, sold without warranty – year of manufacture approx. 1992 Iedpfxjl Tn Afj Alcjib A collection of various grinding spindle shafts / arbor mandrels for grinding wheels is available for these grinding spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries within the European Community.

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Iedpfx Aleynmpgocoib Accessories available on request.

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Ijdpfxst Hw T Ss Alcoib Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Spindle drive 4.5 kW Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Ijdpfxst Hww Ds Alcjib Spindle taper approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special features: " Hydrostatic linear guide with separate hydraulic unit, " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 2017, Technical details: Iiedpjttxg Sofx Alcob Grinding diameter: 280/320 mm Grinding length: 750 mm Centre height: 170 mm Machine weight approx.: 22.5 t Space requirement approx.: 4.7 x 3.65 x 3.0 m

Kondisi: siap digunakan (bekas), Number of axes: 6, Rated payload: 90 kg, Controller: Engel, Weight: 1.13 t. Iijdsk N Dnhjpfx Alceb