Sistem peledakan - Sistem peledakan berkelanjutan

Tsomakos TSFD70/3-11-federhärten

Kondisi: siap digunakan (bekas), lebar total: 3.000 mm, tinggi total: 5.350 mm, panjang total: 15.000 mm, berat kosong: 20.000 kg, Roller conveyor tipe G dengan roda sembur Titan Untuk profil, pelat, rol, pipa... lebar masuk maksimum: 1.100 mm tinggi masuk maksimum: 550 mm 4 turbin, masing-masing 11 kW kecepatan kerja: 1,4 – 2,4 m/menit Daya total: 62 kW Fodpfx Aswikatjbhefu Dipasang langsung di lantai, tidak memerlukan pondasi! Sudah termasuk banyak pilihan suku cadang baru senilai lebih dari 80.000 €!

Kondisi: baru, Tahun pembuatan: 2025, High Cube Basic Blasting Container with Sweeping Floor Fsdpfxew Ivk Ts Abhjfu Shovel Hopper for approx. 4 pressure vessel fillings + additional blasting vessel capacity for extended blasting operations without refilling. Type: SC.20FHC.5800 Basic Standard equipment, ready for operation: (Simply fill abrasive media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo controller - 1x Pressure blasting pot - 1x Pressure regulator and water separator - 1x Blasting hose DN 25 with 8mm blast nozzle - 1x Remote control with dead man’s switch - 1x Feed chute/Hopper for abrasive media - 1x Abrasive sieve + coarse particle catchment container - 1x Rising air separator for blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall with louvered impact separator - 1x 4mm fabric-reinforced rubber wall lining - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, end-of-door switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open: Container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane runway 500kg - C-profile rail for powder coating applications - Blasting trolley - Filter with Big Bag - HEPA post-filter for hazardous dusts (e.g., when blasting stainless steel) - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Model: RDGE 800-4 Year of manufacture: 2004 Passage width: 800 mm Passage height: 550 mm Fedsv Idf Ispfx Abhjfu Blast turbines: 4 units with frequency converter Filter system: Wet filter system Includes multiple infeed and outfeed conveyors. Complete with main control cabinet, full documentation, etc. Excellent condition! Machine is dismantled! WIRE BELT BLAST MACHINE BRAND: RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt width: 800 mm Inlet height: 550 mm Turbine: 4 units with frequency converters Filter: Wet filter Includes several infeed and outfeed conveyors Including main control cabinet, full documentation Very good condition! Machine is currently dismantled Price: Loaded onto truck Warranty: 6-month functionality and warranty guarantee, provided commissioning is carried out by DECK Sarl. Spare parts supply guaranteed for the next 10 years OPTIONAL: Delivery to your factory Assembly / commissioning / training Site supervisor assembly available We also supply spare parts for Rösler, Schlick, Wheelabrator, Gietart, and other shot blasting machines!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 5.850 mm, panjang total: 12.125 mm, lebar total: 5.150 mm, berat keseluruhan: 8.000 kg, masa garansi: 12 bulan, tinggi dalam: 5.000 mm, panjang dalam: 12.000 mm, lebar dalam: 5.000 mm, Perlengkapan: kabin, pencahayaan, EN: PAINT BOOTH 12x5x5M Model from the EZ Series: - LED ceiling lighting - LED side lighting - RIELLO oil burners - Four fans, including: ‎ ㅤ- 2x supply air fans ‎ ㅤ- 2x exhaust fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm should be considered – can be positioned on the right or left side. - Structure: Galvanized steel frame construction - Heat exchanger: High-quality stainless steel - Panels: Filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibrations and the air thrust effect from the main supply air duct. Dual-layer roof: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: radial fan 7.5 kW – 2 units - Exhaust system: radial fan 7.5 kW – 2 units Air filtration system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Fodpfx Ajxm U Exebhsfu Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 angled fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burners: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heat-up time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the roof of the cabin - Insulated roof - Pass-through doors - Water wall - Color according to RAL color chart - EX version (explosion-proof) available

Kondisi: baik (bekas), Maschine Typ Hakenstrahlanlage 250 kg TOSCA TS-250 Typ: Hakenstrahlanlage Max. Werkstückdurchmesser: 1000 mm Max. Werkstückhöhe: 1500 mm Max. Werkstückgewicht: 500 kg Maschinenöffnungsbreite: mm Anzahl Turbinen: 2 Turbinen-Typ: 360 Turbinenraddurchmesser: 360 mm Turbinenleistung: 7,5 kW Max. Turbinenförderleistung: 105 kg/min Fördergleistyp: Y Reinigertyp: Luftabscheider Fundament: nicht erforderlich Ffodovpgq Nepfx Abhju Gehäuseschutz: Mangan + Gummi Erforderlicher Luftdurchsatz: 3.000 m³/h Max. installierte Anschlussleistung: ca. 19 kW Gesamtgewicht der Maschine: 0 kg Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm Die Maschine befindet sich in einer vollständigen Generalüberholung. Sämtliche beschädigten Komponenten werden durch Neuteile ersetzt, Turbinen werden komplett überholt, neue Lackierung RAL 7037/2000. Die Maschine wird in einem Zustand ausgeliefert, der einem Neugerät entspricht. !!! ZUSTAND WIE NEU !!!

Tahun pembuatan: 1988, Kondisi: baik (bekas), Kompletter Atlas Copco Kompressor inklusive Donaldson Ultra-Filter und Behälter, in gutem Betriebszustand. Fsdpfx Abehpx U Ajhjfu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 680 kW (924,54 hp), Perlengkapan: unit pendingin, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant content: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Fedpfx Abjvllxdehsfu Operating pressure: 28 bar / -1 bar (Capacity depends on operating parameters) Number of fans: 5, diameter 900 mm Airflow rate: 162,500 / 131,000 m³/h Motor power consumption: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically tested and is fully functional.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after prior configuration. In addition, the software can read variable data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. Use of a handheld scanner is also possible. Ffodpju Smd Eofx Abheu Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral arms for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064nm • Marking field size: 150x150mm (optional larger) • EZCAD marking software in German/English • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measurement system • Optional: Autofocus system – automatic determination of focus distance • Optional: Extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower to indicate machine status • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard shelf • Frame made of aluminum profile • Air cooled • Door width approx. 700mm / Door pass-through height: 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: bekas, Tahun pembuatan: 2010, 1 Fjdoxz Hh Ijpfx Abhofu

Kondisi: bekas, Tahun pembuatan: 1996, Drill diameter: 3 - 50 mm Fodsp Raizopfx Abhofu Drill length: 500 mm Point angle: 90 - 140° Operating voltage: 380 V Machine weight approx. 120 kg Space requirements approx. 0.80 x 0.60 x 1.30 m - Factory No.: 2374 - Drill grinding machine without drill chuck and setting gauge