Unit peledakan pasir

TURBOTECNICA DELTA GR 7-10

Kondisi: diremajakan ulang (bekas), SCHLATTER MG24 Welded Wire Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Cross wire length: min. 900 mm Cross wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Minimum spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Adjustable via cutting device (0–1) Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Maximum number of longitudinal wires: 24 MG 24.1/8C MESH WELDING MACHINE – Basic configuration including: - 1 Machine base frame - 1 Upper support for reception of press units, continuously adjustable by handwheel - 1 Magnetic support unit with holding magnets and cross wire monitoring - 1 Row of pneumatic solenoid valves for operation of the press units - 1 Air and water installation - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front section: 25 – 250 mm, adjustable via cutting device (0–1) Hedpfx Aswu Tu Dohwei - 1 Feed trolley with panel lifting device - 1 Tool kit for machine adjustment WELDING SECTION including: 8 Type C transformers Rated power per transformer: 100 kVA Secondary open-circuit voltage: 7.1 V Rated secondary current: 14 kA 8 ES 130 thyristor contactors 12 Welding presses: 5.0 kN 12 Longitudinal wire current bridges for wire spacing: 50–100 mm 12 Longitudinal wire current bridges for staggered wires: 100 mm 10 Longitudinal wire current bridges for wire spacing: 100–150 mm 8 Longitudinal wire current bridges for staggered wires: 150 mm 6 Longitudinal wire current bridges for wire spacing: 150–200 mm 6 Longitudinal wire current bridges for staggered wires: 200 mm 24 Bottom copper electrode holders with standard angled electrodes, each with a water-cooled current cable, width: 58 mm 24 Wire clamping jaws Panel width: max. 2,500 mm Cross wire length: min. 900 mm Cross wire length with QF5 dispenser: min. 300 – 1,600 mm Max. spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Min. spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Max. number of longitudinal wires: 24

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hedpfjfzktzex Ahwji Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: sangat baik (bekas), IMM 72780 Double-Sided Polishing Machine Like new condition, the machine has seen very little use. TECHNICAL DATA Hsdpfju Hanysx Ahwsi Polishing disc: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness or timeliness of the information provided.

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Kammer innen 2000 x 1250 x 1250 mm Innenvolumen 2344 Liter Hedouqkwfjpfx Ahwji Bis zu 400 °C (Leistung 33 kW) Vorheizen / Trocknen für manuelle, zyklische und CNC-Bearbeitung bis hin zur interaktiven Konturbearbeitung Abgedeckte Führungsbahnen (DGP) für hohe Langzeitpräzision Direktantrieb vom Motor zur Hauptspindel für laufruhigen Betrieb Ölumlaufschmiereinheit mit Filterung zur Schmierung des Präzisionshauptspindellagers Kombinierte Steuereinheit für wirtschaftlich vorteilhafte Programmierung und Maschinenbetrieb sowie optimalen Zugang zum Arbeitsbereich Länge: 2500 mm Breite: 2015 mm Höhe: 2900 mm Gewicht: 4000 kg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Oven Powder Coating Elektrostatik Tipe Box: Panjang: 500cm, Lebar: 250cm, Tinggi: 300cm - Booth Powder Coating dengan Filter: Panjang: 300cm, Lebar: 220cm, Tinggi: 270cm Hsdpfjv Nvndex Ahwji - Peralatan Powder Coating Elektrostatik: Model: HMK MULTICOLOR, Jenis Penggunaan: Manual

Kondisi: baik (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: MS 1153, Angbot 23158 Hjdpfx Ajllvr Dohwoi Technical Data (approx.): - Passage to blasting chamber: W 370 x H 170 mm - Blasting nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery - Separate control panel - Space requirement for blasting system: 1600 x 2000 x H 1750 mm - Space requirement for blast media vessel: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan: MUNK - SCHMITZ - Airflow: 700 – 1500 m³/h - Extraction fan power: 3 kW - Space requirement for filtration unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Kondisi: baru, Tahun pembuatan: 2025, de Hjdpfxohv U U Ds Ahwji

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Model: 470-15-25K-HP Design: Side beam guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Hedpfxjqakbre Ahwei Purchase or Rental: Systems can be inspected at our facility by appointment. Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you.

Kondisi: bekas, Tahun pembuatan: 2010, Palettes: 2 Hodoqn A Rkopfx Ahwei Number of axes: 4 pcs. Tool holder: HSK 63 Tool stations: 60 Weight: 9,600 kg Spindle speed: 18,000 rpm Coolant filtration system: Yes Chip conveyor: Yes

Tahun pembuatan: 2012, Kondisi: baik (bekas), nomor mesin/kendaraan: ENOG, Demag KBK overhead crane rail system, approx. 8x4m Load capacity / lifting capacity: 250 kg - 0.25 t Technical data of the system: - Crane runway made of Demag KBK1+2 rails System is delivered complete: - KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Incl. Demag DC-COM 250kg electric chain hoist Crane has been dismantled and is immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Hsdpsmqf Nfsfx Ahwsi Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125kg to 1,600kg Please inquire about your crane rail with desired load capacity and dimensions.