Tempat pelepas cepat

unbekannt** 120/106/H85 mm

Kondisi: perlu perbaikan (bekas), Machine number: 1464 Type / Model: FUW 250/IV Travel (X-Y-Z): 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping surface: 700 x 300 mm Ledpfx Asd Hl Stoahota Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Feed range longitudinal: 6.3 to 1,250 mm/min Feed range cross: 6.3 to 1,250 mm/min Power connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Manual Plus control Turning diameter: 260 mm Swing diameter: 475 mm Centre distance: 1,000 mm Turning length: 880 mm Spindle speed: 3,000 rpm 4-position tool post Tailstock Ltjdpfx Aaot T T Urshsa

Kondisi: baik (bekas), Centre height: 205 mm Centre distance: 1500 mm Swing diameter over bed: 410 mm Spindle bore: 47 mm Ljdpjv Du Ixofx Aahjta Spindle mount: Size 6 Tailstock taper: 4 MT Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/cross 0.03-1.3 / 0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Kondisi: bekas, Palet dengan slot T, cocok untuk DMG DMC 100 H dan DMG DMC 100 U. Beberapa palet masih tersedia. Ltodpfsqx Uh Nsx Aahoa

Kondisi: bekas, Tahun pembuatan: 1987, de-katalog-2024-001 Ledpfxsw Ny S Do Aahota

Kondisi: bekas, Swing diameter over bed: 480 mm Swing diameter over support: 280 mm Turning length: 1100 mm Swing diameter in gap: 500 mm Spindle speeds: 18 - 900 rpm Center height: 240 mm Spindle bore: 52 mm Total power requirement: 7.5 kW Machine weight approx.: 1.9 t Ltjdpfoupxyrex Aahsa Space requirement approx.: 2.7 x 1.5 x 1.7 m Lead and feed screw lathe - Forkardt 3-jaw chuck F250 mm - Multifix quick-change tool post incl. 3 cassettes - Coolant system - Machine lamp - Chip guard - Chip tray - Centre point

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, de_to_hu_it_lt_001 Lsdpfx Aexbzqqeahsta

Kondisi: baik (bekas), Dengan tampilan digital Dengan kepala bor dan frais Perjalanan 330 x 400 x 475 mm Area penjepitan meja 650 x 245 mm Kepala spindle ISO 40 Kecepatan spindle 63-2.800 rpm Berbagai aksesori Lsdpfew Nnutsx Aahsta MARCELS MASCHINEN CH

Kondisi: bekas, Tahun pembuatan: 1974, diameter pembubutan di atas alas geser: 480 mm, lebar di tengah: 1.500 mm, Lead and Feed Screw Lathe Manufacturer: Heidenreich & Harbeck Model: Hanseat 480 Completely overhauled in 2012 Technical Data Manufacturer: Heidenreich & Harbeck Model: Hanseat 480 Year of manufacture: 1974, completely overhauled in 2012 Control: conventional Centre distance: 1,500 mm Swing over bed: 480 mm Swing over cross slide: 295 mm Spindle speed: 20 – 2,190 rpm Dimensions (L x W x H): 3.50 x 1.20 x 1.55 m Machine weight: 1,200 kg Equipment Ltjdpfxswm D Ils Aahea - 3-jaw chuck D 250, mounted - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information subject to change. A demonstration under power is possible at any time in our showroom.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Rectangular vertical table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed angle table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 250 mm Ledpfx Aew Uc Npoahota Universal tilting table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 350 mm Swivel range in three planes, either side: 30°- 45°- 30° Spindle taper: - Horizontal spindle head: Iso 30 (40) - Vertical spindle head: Iso 30 (40) - High-speed universal head: SV E20+ES20 Swiveling in the vertical plane: Vertical spindle head: 360° Longitudinal travel (manual/automatic): 320/300 mm Vertical travel (manual/automatic): 375/355 mm Cross travel (adjustment handwheel): 150 mm Quill stroke: 60 mm Micrometer drum reading accuracy: 0.02 mm Main motor kW-rpm: 1.5/1500 Rapid traverse/feed motor kW-rpm: 0.45/3000 Coolant pump motor kW-rpm: 0.15/3000 Spindle speed range: - 1st range rpm: 58-375 - 2nd range rpm: 330-2000 Working feeds – longitudinal or vertical, mm/min: 12-400 - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical), mm/min: 1200 Unless stated otherwise, all technical data provided is without commitment and subject to possible errors or omissions.