Susunan pelat / panel penjepit

UNBEKANNT / UNKNOWN AP 1500x1250x250

Kondisi: bekas, Tahun pembuatan: 1996, Technical Details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm Control unit: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding processes - In plunge-cut mode the maximum plunge length is 160 mm. Blodpfju Ngyzex Abvon - Workpiece discharge is automatic via rail (the function and operation of which is not known to WMW AG) - Main grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, entry angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system Condition: Reference run not possible The machine does not operate in automatic mode Accessories: Various grinding and regulating wheels available on request

Kondisi: bekas, Tahun pembuatan: 1983, Bohrleistung_in_Stahl Bledjtv Iklepfx Abvjn

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 1.400 mm, panjang umpan sumbu Y: 630 mm, panjang umpan sumbu Z: 500 mm, jarak pergerakan sumbu X: 1.800 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 450 mm, kecepatan spindel (maks.): 1.800 rpm, kecepatan spindel (min.): 1.800 rpm, jarak gerak quill: 100 mm, gerak cepat sumbu X: 4 m/menit, pergeseran cepat sumbu Y: 4 m/menit, pergerakan cepat sumbu Z: 1 m/menit, tinggi total: 2.500 mm, lebar total: 3.350 mm, panjang total: 3.060 mm, lebar meja: 630 mm, panjang meja: 1.800 mm, posisi kepala milling: VERTIKÁLNÍ/HORIZONTÁLNÍ, jenis arus masuk: tiga fasa, beban meja: 1.500 kg, berat keseluruhan: 6.500 kg, FGS5063-EN-2025 Bsdexpugnopfx Abvsln

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Bjdpfx Abow D Aq Tevjln Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories

Kondisi: bekas, Tahun pembuatan: 1961, de2c1c73 Bedowwl I Iopfx Abveln

Kondisi: bekas, Tahun pembuatan: 1968, Roll diameter 500 mm Throat depth 1050 / 485 mm Workpiece height 300 mm Saw blade length 3920 - 4050 mm Cutting speed 15 - 940 m/min Table height 1040 mm Table surface 750 x 800 mm Table tilt 15 degrees Total power requirement 4.0 kW Machine weight approx. 1750 kg Space requirements approx. 2100 x 1000 x 2100 mm Blsdoiqp Erepfx Abvon - Unique mitre range left/right up to 30° acute angle - Mitre setting via lockable indexing every 15° - Adjustable saw blade for optimal entry angle - Hydraulic vice on both sides - Electronic blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating linear guides - Additional table 450 x 450 mm - Machine lamp

Kondisi: siap digunakan (bekas), Fungsionalitas: fungsi terbatas, daya: 103 kW (140,04 hp), daya angkat: 4.000 kg/m, tinggi angkat: 7.000 mm, Tahun pembuatan: 2012, jam operasional: 3.380 h, Perlengkapan: kabin, komputer bawaan, penggerak semua roda, sekop standar, Telehandler MERLO P40.7 Turbofarmer Tahun produksi: 2012 Menurut jam operasional: 3.380 jam Kapasitas angkat: 4 ton Ketinggian angkat: 7 meter Tenaga: 103 kW Bljdpfjyg A Tljx Abvjn - Cat asli - Ban baru - termasuk bucket Harga jual: 25.900,-- netto Pengiriman ekonomis juga memungkinkan

Kondisi: baik (bekas), Manufacturer: STANKO Model: 7D430 Bjdpfx Aowpud Aebvsln Year of Manufacture: 1994 Table rotation: 360° Head tilting capability up to 10° Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric | Imperial Table diameter: Ø 630 mm Table load capacity: 1,000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Throat depth: 500 mm Stroke range: 3 - 38 m/min Power: 12 kW Approximate Dimensions Length: 3,000 mm Width: 2,200 mm Height: 3,000 mm Weight: 6,150 kg Please Note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute any representation or contractual terms. We recommend verifying all critical details.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8153336470, berat keseluruhan: 616 kg, laju aliran volumetrik: 399 m³/jam, tekanan (min.): 4 batang, tekanan (maks.): 13 batang, tingkat kebisingan: 67 dB, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, We are a company specializing in the compressed air industry for over 20 years. Our professional service level and the high-quality products we offer—market-proven—guarantee a successful partnership with you. We offer a NEW Atlas Copco GA37VSDs FF rotary screw compressor (variable speed drive, with integrated dryer). This machine is equipped with a frequency inverter (VSD), built with the latest technologies, which translates into greater efficiency and performance: - On average, 20% lower specific energy consumption (SER) than previous GA VSD series models. - The eco-friendly and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models operating on idle. - Additionally, performance increase (FAD) of up to 12% regardless of energy savings. - Efficient fan motor (ERP 2015 compliant) reduces energy usage and noise level. - The highest efficiency iPM motor (up to 94.5%), exceeding IE3 efficiency levels. Built to work hard for your success. The GA series oil-injected rotary screw compressors provide market-leading efficiency, high productivity, and low maintenance costs—even under the toughest conditions. Technical Data: - Capacity at 4 bar: 15.69–13.75 l/s / 0.94–7.85 m3/min - Capacity at 7 bar: 15.67–129.35 l/s / 0.94–7.76 m3/min - Capacity at 10 bar: 15.68–110.79 l/s / 0.94–6.65 m3/min - Max pressure: 10 bar (13 bar version available on request) - Voltage: 400 V - Motor: 37 kW - Noise: 67 dB(A) - Weight: 616 kg - Motor with internal permanent magnets (iPM) - Compression element Blodpfxswlp Hdj Abvjn - Direct drive - Innovative fan - Durable oil separator/filter - Electronic condensate drain with zero compressed air loss - Elektronikon controller - Inlet valve - VSDs module - OEM code: 8153336470 If you are unsure whether this machine is suitable for you, or can’t find the right compressor, CALL US! We can advise you on choosing the right equipment. Feel free to check out our full product range.

Kondisi: bekas, EN: Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0–40 mm / Ø Continuous feed: 0–40 mm / Ø Table swivelling range: ±6.5° Table longitudinal travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece max. weight (unsupported): 130 kg incl. clamping Maximum transverse movement: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, state-of-the-art and future-proof CNC control. Photo shows a machine already delivered with special options. - Operation via touchscreen panel is extremely user-friendly. - The icons on the control panel are practically identical to the original control, so no re-training is necessary. - Diagnostic function with display of PLC messages and digital I/O - Infeed dressing function can be extended or modified as per customer requirements. - Optional indexed spindle stop for the workpiece spindle available. - New maximum infeed travel: 40 mm (can be further increased on request). - Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment not possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Bjdouxftrepfx Abvoln Further accessories on request. Machine is equipped with an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal feed and rapid traverse. Highly versatile for external and internal cylindrical grinding, or for external, face and internal grinding of single parts in a single clamping. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - In-process measuring control Please note: At present, the machine does not comply with the essential safety and protection requirements as required under BetrSichV 2015 (German Ordinance on Industrial Safety and Health). An increase of the minimum required safety target must be determined through a risk assessment in accordance with BetrSichV.