Flensa chuck

unbekannt Ø 200 mm

Kondisi: baik (bekas), planscheibe_200 Ksdpexuflfofx Aahsnf

Kondisi: bekas, Hydraulic Scissor Lift Table GRUSE Type ELS 0.5-8-1-G-SO Serial No.: 124984 Year of Manufacture: 2017 Load capacity: 300 kg Platform size: 1250 x 800 mm Useful lift height: max. 785 mm Table height - lowered: 345 mm Table height - raised: 1130 mm Motor power: 0.8 kW Power supply: 400 Volt, 50 Hz - Foot switch for lifting and lowering, with emergency stop and key switch for control activation - Single scissor with one lifting cylinder - All-round safety contact strip with limit switches under the upper frame - Adjustable limit switch for upper lift limitation - Table surface with sturdy wooden worktop and airliner rails with lashing eyes Ksdpoixq Hnefx Aahjnf - Hydraulic power unit with tank mounted under the table - Feet positioned under the table corners, can be moved with pallet truck Net weight: 250 kg Very good condition, almost as new

Kondisi: baik (bekas), Flensa chuck, dudukan flensa, flensa chuck bubut, flensa penggerak, flensa antara, piringan muka chuck - Flensa chuck: untuk chuck tiga rahang, chuck empat rahang, piringan muka - Diameter luar: Ø 200 mm Knodpfx Aaexrk T Nshjf - Pola baut: Ø134 mm - Dudukan: short taper 6, tirus Ø 101 - 106 mm - Dimensi keseluruhan: Ø 200 x 145 mm - Berat: 7,6 kg

Kondisi: baik (bekas), Four-jaw chuck Kjdpemxpvbofx Aahjnf - Four-jaw chuck: Chuck size Ø 200 mm - Through-hole: Ø 60 mm - Bolt circle: Ø 175 mm - Weight: 13.8 kg

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 24.300 h, Perlengkapan: penggerak semua roda, en-Caterpillar 988H (approx. 2012) – Technical Data Below is a comprehensive overview of the key specifications: Engine & Performance * Engine Model: Cat C18 ACERT, 6-cylinder, turbocharged * Displacement: approx. 1,104.5 cu in (approx. 18.1 l) * Rated Power (net): 501 hp (approx. 374 kW) according to ISO 9249 or EEC 80/1269 * Gross Power: approx. 555 hp (approx. 414 kW) * Additional info: ISO 14396 Net: 540 hp, ISO 3046-2 Gross: 520 hp Weight & Capacities Knsdpfx Asxar Hyjahjf * Operating Weight: approx. 128,328 lb (approx. 58,209 kg) * Rated Payload: approx. 27,558 lb (approx. 12,500 kg) * Maximum Bucket Capacity: approx. 10 yd³ (approx. 8 m³), heaped; 8 yd³ (6 m³), struck; 6.9 yd³ (5.3 m³) Dimensions & Volumes * Length with bucket on ground: approx. 40.08 ft (approx. 12.2 m) * Width over tires: approx. 11.75 ft (approx. 3.58 m) * Cab Height: approx. 13.42 ft (approx. 4.13 m) * Bucket hinge pin height (max. lift): approx. 19.18 ft (approx. 5.85 m) * Clearance at maximum lift: approx. 6.66 ft (approx. 2 m) * Ground clearance: approx. 1.67 ft (approx. 0.55 m)

Kondisi: baik (bekas), Roda beban berat, roda tugas berat, ban, ban dengan pelek, ban beban berat, ban forklift -Roda beban berat: 4 buah, dari forklift listrik -Ban: Ø 200 x 80 mm -Napel: Ø 65 x 45 mm / Ukuran lihat foto Kjdpfxexbylts Aahjnf -Pengiriman/harga: lengkap -Dimensi per unit: Ø 200 x 170 mm -Berat: 10,5 kg/unit

Kondisi: bekas, Three-jaw chuck - Chuck size: Ø 200 mm - Through-hole: Ø 60 mm - Weight: 14.5 kg Knodpfx Aod I Ucyjahsf

Kondisi: bekas, Pillar drilling machine, column drilling machine, upright drilling machine, multi-spindle head, multi-spindle drilling head, drilling gearbox - with twin-spindle drilling head by Sigloch Schrieder, type: V602 - Drive power: 1.02/0.88 kW - Adjustable drill spacing: 18-110 mm - Max. drill diameter: 2x Ø 6 mm - Table size: 275 mm - Spindle taper: MK3 Knodpfoc Rpnnjx Aahsf - Throat depth: 220 mm - Speed range: 100-2900 rpm - Columns: Ø 100 mm - Spindle stroke: 75 mm - Gearbox - Dimensions: 900/400/H1910 mm - Weight: 230 kg

Kondisi: baik (bekas), 4-jaw chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic power chuck Knjdpfx Asv Uwqkeahsf - Power chuck: Chuck size Ø 200 mm - Type: LK 200 A72-2163-132 - Thread: M20 - Pitch circle: Ø 140 x 17 mm - Jaw width: 23 mm - Through-hole: Ø 32 mm - Dimensions: Ø 200 x 170 mm - Weight: 18.8 kg

Kondisi: bekas, Chuck flange, flange mount, lathe chuck flange, drive flange - Chuck flange suitable for: three-jaw chuck, four-jaw chuck, faceplate - Outer diameter: 200 mm - Pitch circle: Ø 132/M16 - Price: per piece Knedpfx Aajd N Uy Tjhsf - Quantity: 3 pieces - Dimensions: Ø 200/H51 mm - Weight: 7.9 kg

Kondisi: bekas, Clamping table, angle plate, T-slot table, rotary table, milling machine table Kjdpfx Aasqddi Ushenf - Clamping table: Milling machine table - Table surface: 600 x 220 mm - Y-axis: 130 mm adjustable, handwheel with fine adjustment, see photos - T-slots: Slot width 12 mm, slot spacing 45 mm - Overall dimensions: 690/490/H300 mm - Weight: 72 kg

Kondisi: bekas, Chuck flange, flange mount, lathe chuck flange, drive flange - Chuck flange suitable for: three-jaw chuck, four-jaw chuck, face plate - Outer diameter: 200 mm Knsdpjd Rakrjfx Aahof - Bolt circle: Ø 120/Ø 12 mm - Dimensions: Ø 200/H37 mm - Weight: 7.5 kg

Kondisi: bekas, Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, wall penetration sealing - Pipe sealing cushion - Outer/inner diameter: 200/142 mm - Height: 20 mm - Bolt circle: Ø 171/7 mm - Delivery of steel/stainless steel cover plates possible - Quantity: 192 cushions available - Price: per piece - Weight: 0.3 kg/piece Ksdpfx Aod Ta Nyjahenf

Kondisi: baik (bekas), Tahun pembuatan: 2016, Bosch Rexroth Linear Cylinder Machine The machine is a custom-made unit for Bosch, designed for in-house use in their production process. The machine includes: - Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-phase synchronous permanent magnet motor - Festo DGC-40-650-KF-Y5R-A 532449 H608 - Rexroth EMC-063-NN-2 - Schischke MY_1106 E2 – Voltage 380-480 V, 6 bar, 1300 kg, year of manufacture 2016 Condition: used Knsdpfx Aehufcleahjf Complete factory closure, large selection of mezzanine floors, pallet racking, shelving systems, vertical carousels. High-quality industrial machines, lathes, grinding machines, hand tools. You can find more new and used items in our shop! International shipping costs on request!

Kondisi: bekas, Chuck flange, flange mount, lathe chuck adapter, drive flange - Chuck flange suitable for: 3-jaw chuck, 4-jaw chuck, faceplate - Outer diameter: 200 mm - Pitch circle: Ø 176/Ø 11 mm - Pitch circle: Ø 114/4 x M10 Knsdod Rakhepfx Aahsf - Dimensions: Ø 200/H20 mm - Weight: 3.4 kg