Unit hidrolik untuk chuck daya

unbekannt 11 kW

Tahun pembuatan: 1986, Kondisi: bekas, Extraction system for halls, chip filter unit, filtration unit, chip extraction, wood chip extraction, radial fan, chip extraction blower, fan, extraction system, chip blower - Unfortunately, no conveying data available Ljdpfx Asfxx Nnec Ajhp - Motor: MEZ type 4AP80-2 - Motor power: 1.1 kW - Speed: 2,840 rpm - Inlet connection: Ø 60 mm - Outlet connection: Ø 400 mm - Chassis: on rollers - Dimensions: 940/540/H1510 mm - Weight: 74 kg

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Lhjdped Ab H Hsfx Ac Ajp Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Tahun pembuatan: 2009, Kondisi: baik (bekas), 0812de82 Lhodpfx Acodq U S Ie Ajp

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Seilproduktionslinie / Litzen-Umspullinie REDAELLI Linie FÜR SPANNBETONLITZEN AUS STABILISIERTEM BETON 3-adrige und 7-adrige Litzen, die bei Trägern mit großen Spannweiten, Brückenelementen sowie großen vorgespanntelementen wie Deckenelementen, Pfählen sowie für vorgespannte und nachgespannte Bauwerke eingesetzt werden. - Baujahr: 1979/2005 Lhjdpfxot Iq Hbo Ac Asp - Spulengröße: 800x900 mm - Produktionsbereich für Litzen: - 3/8 - 1/4 - 1/2 - 5/16 - 6/10 - 7/16 - 7/10 - 9/16 - Coilgewicht: 4.000 kg - Produktionsgeschwindigkeit: 40-60 m/min - Hochkohlenstoffdraht - PC-Litzengrößen: - 6,4 / 6,9 / 9,3 / 21,5 mm - Elektrische Versorgung: 400 kW Linienumfang: - Drahtabwickler - Verseilmaschine - Ofen - Kühlsystem - Zugrollen - Seilaufwicklung

Kondisi: baru, Load capacity 5 t Workpiece diameter 250–2500 mm Drum diameter 250 x 100 mm Feed rate 100–1000 mm/min Total power requirement 0.75 kW Lsdpefv A A Ujfx Ac Ajhp Features • Self-aligning for multiple diameters • Electronic quality components from Schneider/Siemens/Delta • Infinitely variable drive unit speed • Polyurethane-coated drive rollers • Optimum load distribution (4 rollers/unit), especially gentle on workpieces with thin walls and sensitive surfaces • Wired remote control and dual foot pedal • CE certificate • 3-year warranty (see warranty conditions)

Kondisi: baik (bekas), Technical Data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Lhedpfx Acjwkaals Ajp Maximum pre-bending: 4.0 mm Top roll diameter: 210 mm Side lower roll diameter: 210 mm Central lower roll diameter: 210 mm Conical bending device by tilting both side rolls Hydraulic drop-end bearing Swiveling control panel with digital display Dimensions (Length x Width x Height): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine’s visual appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Tahun pembuatan: 1969, Kondisi: sangat baik (bekas), For sale: Schratze-Wirtz WE2W0DS mandrel tube bending machine. The machine is fully operational and comes with a comprehensive set of tooling. Year of manufacture: 1969 Length: 9,600 mm Width: 3,500 mm Height: 2,000 mm Tooling for tube bending includes: - Ø83 mm – R300 - Ø88.9 mm – R300 - Ø101.6 mm – R250, R400 - Ø108 mm – R450 - Ø114.3 mm – R550 - Ø133 mm – R400 - Ø137 mm – R500 Lodspxkwljpfx Ac Ashp - Ø168 mm – R700 - Ø193 mm – R600 - Ø219 mm – R640, R800 Contact for additional information or to arrange an inspection.

Kondisi: baik (bekas), Hydraulic power unit, hydraulic pump, piston pump -Housing material: stainless steel -Drive power: 11 kW -Speed: 1,750 rpm -Pump: Vickers PVB10 RSV31 CG20 -Flow rate: approx. 36 L/min Lodpfx Acjb A Hcns Aehp -Pressure: 210 bar -Hydraulic valve -Filter -Hydraulic tank dimensions: 500/450/H370 mm -Dimensions: 520/330/H600 mm -Weight: 320 kg

Kondisi: bekas, Hydraulic spreader and press device with hydraulic power unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreading tongs, hydraulic spreader Year of manufacture: 1988 / 1986 Hydraulic power unit type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 liters Spreader - tongs WEBER type SP30 / 059 198.0 Reach = arm length 340 mm Spreading width max. 810 mm Spreading force in working area max. 132 kN Closing force 99 kN Lodpfx Aodzp S Roc Aohp - Dual hose with quick coupler Rated power 0.9 kW Power supply 220 Volt, 50 Hz Weight of hydraulic unit approx. 40 kg Weight of spreader approx. 25 kg Very good condition Hydraulic fire-fighting rescue set with hydraulic power unit and a spreader. The spreader is used to create rescue openings after road traffic accidents by spreading apart components. Also suitable for compressing or lifting loads. Versatile in use thanks to the multifunctional spreader jaws made of drop-forged and hardened steel.

Tahun pembuatan: 1962, Kondisi: baik (bekas), Manufacturer: VEB Model: RV16 Workable cross-section: 120 x 140 mm Weight: 2.7 t Ledpjltiy Tsfx Ac Aohp