Gearbox 1:30

unbekannt 150/145/H175 mm

Kondisi: baru, Tahun pembuatan: 2016, 1 piece of overhauled, unused industrial bevel helical gear unit from ASUG. TGL 21815 All gearbox components have been replaced except for the housing! Jaw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil filling: 170 kg Input speed: n1 = 1400 rpm Output speed: n2 = 17.5 rpm Weight: 1450 kg Tsdpfogwlrdjx Abvec Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1170 mm !! Gear unit is not equipped with oil cooler !!

Kondisi: baru, Tahun pembuatan: 2026, Wood Splitter LUP7T CORMAK is an electric log splitter with a splitting force of 7 tons, designed for preparing firewood and kindling. This model handles logs up to 520 mm in length and 250 mm in diameter, making it ideal for household use. The machine features a 230 V / 2200 W motor, hydraulic cylinder with automatic return, two-handed operation, a safety cage for the working area, and comes equipped with a wheeled stand. Choose the CORMAK LUP7T if you need a compact 230 V splitter for regular firewood preparation around the home. Applications of the CORMAK LUP7T Splitter The CORMAK LUP7T log splitter is the right choice wherever firewood is regularly prepared, but there is no need for a large industrial machine or a model with a stand. Recommended uses: - Households - Farms - Wood-heated homes - Fireplace and stove users - Small firewood preparation businesses - Agritourism facilities and guesthouses - Workshops and maintenance areas - Users handling both seasoned and green wood The LUP7T is suitable for users seeking a faster and more convenient method for preparing firewood, minimizing the manual effort of splitting logs. Who should consider a 7-ton log splitter? The CORMAK LUP7T is ideal for users who require a compact, easy-to-operate firewood splitter. The 7-ton splitting force, 230 V power supply, and small frame (without a stand) make it well-suited for household, farm, or small commercial use. A good choice for: - Homeowners with wood heating - Fireplace users - Farms preparing their own firewood - Those wishing to reduce manual log splitting - Smaller firms and facilities with regular firewood requirements - Users seeking a splitter that’s easier to store than stand-mounted versions The CORMAK LUP7T is equipped with a two-handed operation system, increasing safety and control over the splitting process. Both hands are required to operate the machine, minimizing the risk of accidental contact with the work area. An additional safety feature is the protective cover over the splitting area. This is especially important for regular operation, letting users work in a safer, more organized, and predictable manner. Stepless Adjustment of Splitting Range The splitter offers stepless adjustment of the splitting length, allowing precise adaptation for the length of wood being processed. This reduces unnecessary cylinder travel and increases efficiency during continuous operation. Tedpfx Aszarp Nobvjc This function is especially practical when splitting uniform pieces for stoves, fireplaces, or boilers. Technical Specifications - CORMAK LUP7T: Splitting force: max. 7 T Maximum log diameter: 250 mm Maximum log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: Mains electricity Length: 950 mm Width: 325 mm Height: 510 mm Warranty: 2 years Stand: Not included Standard Equipment - CORMAK LUP7T hydraulic log splitter - Hydraulic cylinder with automatic return - Two-handed control system - Protective cage for the working area - Robust splitting wedge - 230 V / 2200 W motor - Powder-coated steel frame

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1976, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months, single-shift operation from delivery, on the mechanics overhauled by us. The electrical and electronic components are excluded, as they were only tested for functionality. For machines located outside our North Bavarian sales region, travel expenses are to be borne by the customer. Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system Todpfx Abjmhfrrjvoc - Operating manual Used, as seen Technically, the machine corresponds to the standard of its original year of construction.

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. Todpfx Asftm Hrsbvoc *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Kondisi: bekas, CNC-TOK-4601250 Tedpexwp Ebsfx Abvoc

Kondisi: sangat baik (bekas), Planer Thicknesser, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle adjustment, dimensions 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutter block speed: 5000 rpm 4-knife cutter block, diameter 120 mm Max. depth of cut: 8 mm Dust extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table lifting and lowering with foot pedal Numerical depth of cut indicator Noise reduction combs on the cutter block Star-delta start Emergency stop button CE-compliant Includes all documentation Knife setting gauge NEW V-belts NEW cutter block bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight: approx. 900 kg Todjy Emf Repfx Abvsc Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location and include loading! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machines at the location. • Special agreements are only valid in written form. (We will only answer enquiries including your address and telephone number!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Geared motor, electric motor, geared electric motor, helical geared motor -Manufacturer: SEW-Eurodrive, helical geared motor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i 18.24 -Speed: 1474/81 rpm at 50 Hz, see photo of nameplates Tjdpfxst Drkye Abvsc -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Kondisi: baru, Tahun pembuatan: 2025, Yanigav Bor Tanah TAM 245 • Penambatan tiga titik yang sederhana • Rangka sangat kokoh, dilas • Gearbox serbaguna dan bertenaga, dari 30 hingga 90 HP • Diameter mata bor tanah yang dapat digunakan: 10 cm hingga 80 cm dengan tinggi maksimal 1,80 m Todpfx Aber Eznievsc • Pergeseran 1,30 m di setiap sisi sumbu • Rangka dengan panjang 245 cm • Koreksi kemiringan auger (depan/belakang dan kanan/kiri) • Bor tidak termasuk

Kondisi: baik (bekas), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, mid-mower lift cylinder - Hydraulic cylinder: stroke 105 mm - Piston rod: Ø 23 mm - Mounts: Ø20 x 22 mm - Cylinder: outside Ø 58 mm - Dimensions: 475/70/H75 mm Todpfx Aegv Dinjbvoc - Weight: 5.7 kg

Kondisi: bekas, Mesin Frais Alat Universal DECKEL Tipe FP 1 No. Mesin 51265 Tahun Pembuatan sekitar 1967 Perjalanan sumbu X: 300 mm Y: 150 mm Z: 340 mm Ukuran meja 600 x 200 mm Taper spindle SK 40 - S20 x 2 Kecepatan spindle 40-2000 rpm, 16 tingkat Daya motor 1,0 dan 1,6 kW, bisa pengalih kutub Koneksi listrik 380 Volt, 50 Hz - Feeding pada sumbu X dan Z - Kecepatan spindle melalui 2 kecepatan motor dan 8 tingkat transmisi - Gerakan pinol pada kepala frais vertikal 60 mm - Meja sudut dapat diputar, diputar-putar, dan dimiringkan - Pompa pendingin di kaki mesin - Lemari kontrol terpisah Tsdpfsghtvaox Abvoc Dimensi ruang yang dibutuhkan P x L x T 1100 x 1100 x 1600 mm Berat 690 kg dalam kondisi baik