Menjepit piring

unbekannt 801/502/H930 mm

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Hnedjuz If Njpfx Ab Seu Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Maschine ist in gutem Zustand. Die gezeigten Einzelteile werden nicht mitgeliefert. Schneidwerkzeuge sind nicht im Lieferumfang enthalten. Hnedporpk Rmofx Ab Sou

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 585 mm, jarak lintasan sumbu Y: 185 mm, jarak gerak sumbu Z: 320 mm, tinggi total: 2.245 mm, lebar total: 1.340 mm, panjang total: 1.140 mm, lebar meja: 240 mm, panjang meja: 1.000 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 100 rpm, berat keseluruhan: 1.000 kg, jangkauan kerja: 650 mm, tegangan masuk: 400 V, jarak meja ke pusat spindel: 370 mm, frekuensi input: 50 Hz, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Kapasitas bor baja ----- 50 mm Kapasitas frais baja ----- 25 mm Kapasitas frais keliling ----- 100 mm Perpindahan memanjang (X) ----- 585 mm Perpindahan melintang (Y) ----- 185 mm Perpindahan tinggi (Z) ----- 320 mm Motor horizontal ----- 1,5 KW Motor vertikal ----- 2,2 KW Spindel frais horizontal ----- 60 ~ 1350 rpm (9) Spindel frais vertikal ----- variabel 100-600 / 350-2000 rpm Koneksi spindel ----- ISO 40 Meja kerja ----- 1000 x 240 mm Berat ----- 1000 KG INCLUDE * Inverter frekuensi DELTA * Pembacaan digital 3-sumbu SINO * Meja kerja dengan umpan otomatis memanjang dan melintang * Penerangan LED * Sistem pendingin Hnedpfoga Twfjx Ab Ssu * Panel kontrol mewah * Kepala frais dapat dimiringkan kiri/kanan 0 - 45 derajat * Meja kerja dapat diputar * Berbagai holder dalam koper

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.200 kg, diameter spindel: 6.995 mm, jenis arus masuk: tiga fasa, diameter rol: 210 mm, kecepatan spindel (maks.): 20 rpm, kecepatan spindel (min.): 60 rpm, tinggi total: 1.900 mm, panjang total: 2.700 mm, lebar total: 1.600 mm, lebar rol: 175 mm, tahun perombakan terakhir: 2026, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, Thread rolling machine - thread rolling machine ORT RP18 2-roller Overhauled - new Siemens PLC See video The machine is located in our warehouse in Gussago BS, under power Test run possible Mimu machine tools Hnjdevxa Dbjpfx Ab Ssu Thread rolling is a mechanical process without material removal, which can be carried out cold or hot, serving the purpose of improving surface finish (and thus fatigue behavior).

Kondisi: baik (bekas), Tahun pembuatan: 1994, Foldable latch Hjdpec Nw N Njfx Ab Ssnu

Kondisi: baru, Tahun pembuatan: 2024, de_001 Hnodpeu Nyxwofx Ab Sou

Kondisi: bekas, Hydraulic Low-Profile Scissor Lift Table FLEXLIFT FLUNDER Type 1500 / 100 (without hydraulic power unit) Year of manufacture: 1991 Rated load capacity: 1,500 kg Lifting capacity (practically tested): 1,000 kg (at approx. 350 bar) Platform size: 2,100 x 1,400 mm Lift height (max): 930 mm Lowered installation height: 100 mm (with mounting frame) Raised installation height: 1,030 mm Hydraulic operating pressure: 350 bar = lifting capacity 1,000 kg Hydraulic motor power: 1.5 kW Power connection: 400 Volt, 50 Hz - Mechanical-hydraulic safety limit switches stop lowering when the safety bar is activated - Without hydraulic power unit - Without electric control unit Mounting frame length: 2,270 mm Mounting frame width: 1,580 mm Mounting frame height = installation height (lowered): 100 mm Net weight of lift table: 500 kg Hnjdpfx Aol Nbqcjb Ssu Good condition

Kondisi: bekas, KA_GB 10.14.14/d Hnedodyvipopfx Ab Ssu

Kondisi: bekas, Tahun pembuatan: 1996, Maximum core drilling diameter: 25 mm Drilling depth: 1000 mm Swing diameter: mm Total power requirement: 25 kW Machine weight approx.: 12.5 t Space requirements approx.: m T B T CNC-controlled horizontal deep hole drilling machine Type: BWP 250 Year of manufacture: 1996, mechanically and electrically overhauled in 2006 Working area: - X axis = Drill carriage travel: approx. 2,000 mm - Z axis = Drill carriage stroke: approx. 1,200 mm - Drilling depth with 2 steadies: approx. 1,000 mm - Y axis = Drill carriage vertical travel: approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity – solid material: approx. 4 – 25 mm diameter Tool holder: HSK 50 Spindle speed: 1,260 – 15,000 rpm Feeds / rapid traverse for Z/X/Y axes continuously variable: 100 – 10,000 / 15,000 mm/min Hnodpet Hw Ayofx Ab Sju Feed drive power: 27 Nm / 1,000 daN Spindle drive power: 7 kW Total drive approx.: 30 kW – 400 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Equipment: - Ideal machine for complete machining of larger workpieces, moulds, and plates using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, keyway milling up to Ø 30, spiral drilling/enlarging up to Ø 30, countersinking, and thread tapping up to M 24 x 3. - SIEMENS 840 D 4-axis CNC control with process monitoring, etc. - High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds - Pneumatic workpiece-contact drill sleeve carrier (200 mm), dual-swivel - Fixed 12-pocket tool changer by MIKSCH, Type CTM 40 with 800 mm travel, suitable for spiral drills, end mills and tapping tools; changing from ELB deep hole drills to standard tools is manual - The table is stationary, designed for high workpiece weights and accurate drilling - Mounted on the table: FIBRO CNC rotary indexing table Type RTN 400 = 420 x 420 mm as B-Axis - Optional: Hydraulic FIBRO rotary indexing table, Ø 1,000 mm, for division 3–144 or angle degrees 2.5–120° - Large coolant system approx. 11 kW pump with scraper belt chip conveyor and various filters - 2 support steadies for supporting the deep hole drill shafts - Full machine enclosure with side and front access Condition: very good – a truly rare opportunity, can be demonstrated under power soon Delivery: ex stock here Payment: strictly net upon receipt of invoice We look forward to your order. For further information, please do not hesitate to contact us.

Kondisi: baru, Table size: 800 x 800 mm Table load capacity: 1500 kg Swivel range: 0 - 105 degrees Rotational speed: 0.15 - 1 rpm Height adjustment: 672 - 1180 mm Hollow spindle diameter: mm Welding current: 500 Ampere Torque at faceplate: 3000 Nm Total power requirement: 0.75 kW Hsdpfx Aofv Azpjb Sjnu Space required: approx. 1560 x 1120 x 750 mm Features - Made in EU - Self-locking gearbox prevents overrun and lag with eccentric loads - Hydraulic height adjustment allows for almost unlimited positioning options - Electronic components from Schneider/Siemens/Delta - Frequencz-controlled stepless turntable speed - High stability due to heavy-duty, compact design - CE certificate - Excellent price-performance ratio - Standard version delivered with remote control and dual foot pedal - 3-year warranty (see warranty conditions) - Hydraulic height adjustment with locking system (for fall protection) Price on request