Ban berjalan

Unbekannt Förderband

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm Ledpfog Ey Rfsx Aahsta (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: bekas, Tahun pembuatan: 2018, Plant: Decanter Type: Flottweg C4E-4/454 Complete Dewatering System in Container Year of Manufacture: 2018 Sludge Throughput: approx. 0–40 m³/h Solids Capacity: max. 1.2 t DS/h Features: Front double door, side access door, fan heater, lighting, power sockets, etc. Bowl: max. speed 3650 rpm Drum Diameter: 470 mm System: Containerized plant with swap body system for mounting subsequent system components. Fully piped and wired, operational as a functional unit. Container Design: Frame construction, clad with sandwich panels, mounting points for swap body transport systems. Accessories: FHM PolyMix 4000SP polymer preparation unit, measuring equipment, control panel. Feed Pump: Seepex BN 52-6LS Lodpfx Aasu R Icmjheta Discharge Conveyor: Dual-trough screw conveyor SS D320 Dimensions: L 7820 mm x W 2500 mm x H 3880 mm Unladen Weight: 14,500 kg Operating Weight: 15,000 kg Voltage: 400 V Current Draw: 142 A Max. Power Consumption: 70 kW Fusing: 250 A Frequency: 50 Hz Sludge Inlet: DN 100 Centrate Outlet: DN 200 Solids Discharge: Screw conveyor Further Information: see photos

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Parts cleaning machine / spray cleaning system type L102 Ltodpehymmgsfx Aahoa Automatically operating hot-water parts washer with basket drive via geared motor, two stainless steel wash pumps (manufacturer: Lowara), two circulating three-sided spray systems. - Basket diameter: 910 mm - Working height: 520 mm - Max. load weight: 200 kg - Spray pressure: 2 x 3 bar - Tank capacity: 175 litres - Heating: electrically adjustable (RT - 90°C) - Machine dimensions (LxWxH): 1,300 x 1,250 x 1,990 mm - Empty weight: approx. 300 kg - Wash timer freely adjustable (minutes and hours) - Complete cleaning machine (interior and outer cladding) made of stainless steel 1.4301 - Water circulation system and loading basket made of stainless steel 1.4301 - Bath cover with fine filter (2,000 micron) - 2 suction filters for pump protection - Steam and vapour extraction with condensate return This is a demonstration unit from the Glogar Technology Center.

Tahun pembuatan: 2011, Kondisi: hampir baru (bekas), For sale: 1 roller conveyor, each including a geared motor. Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details, see type plate image) Ljdpfx Aaoihpn Nohjta Three out of four roller tracks are equipped with a wooden side wall along the entire length. One roller track has a wooden side wall for a length of 5.20 m. Two out of four roller tracks are each equipped with 3 lateral removal systems (see pictures).

Tahun pembuatan: 1997, Kondisi: diremajakan ulang (bekas), 2 pieces process design volute casing pumps 1 unit fully overhauled; pump and motor bearings replaced with new ones. Mechanical seal overhauled by specialist company. All gaskets replaced. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: Double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: Closed two-channel impeller Impeller diameter: 277 mm Bearing type: Rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: Oil Oil level monitoring for lubrication Materials: Pump casing: Duplex stainless steel Noridur 1.4593 (9.4460) Wear plate: Duplex stainless steel Noridur 1.4593 (9.4460) Discharge cover: Duplex stainless steel Noridur 1.4593 (9.4460) Shaft: Tempered steel C45+N Impeller: Duplex stainless steel Noridur 1.4593 (9.4460) Bearing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex stainless steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Nominal pressure (suction): PN 10 Nominal pressure (discharge): PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Rated power (P2): 7.50 kW Insulation class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Ltjdpfoiuznujx Aahea Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is particularly suitable for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang umpan sumbu Y: 6.000 mm, Tipping trough for logs up to 6 m in length. Available from September 2024. Ledpsr Iig Dsfx Aaheta

Kondisi: baik (bekas), The debarker is perfectly suited for processing both hardwood and softwood logs. - Trolley made of heavy-duty steel construction - 5 pairs of drive wheels - Milling arm constructed from heavy-duty steel - Hydraulic milling head - 22 kW motor Please note: The log feeder visible in the photo is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR. Ltsdpfxjtuyr Ie Aahsa

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): Ljdjg Ezaropfx Aaheta 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm Ljdpferigxysx Aahsta 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: sangat baik (bekas), Storti RM 500 Edger - Manufactured in Italy - Year of manufacture: 1993 - Electric saw blade spacing adjustment TECHNICAL SPECIFICATIONS: - Max cutting width: 435 mm - Max cutting height: 170 mm - Motor power: 2 x 22 kW Ltsdpfx Aok Talpjahea - Max element width: 600 mm - Minimum material length: 800 mm - Max saw blade diameter: 600 mm - Spindle diameter: 40 mm - Two upper feed rollers - One upper pressure roller - Feed rollers motor power: 2 x 1.1 kW - Automatic pneumatic roller pressure - Seven lower toothed feed rollers - Electric saw blade positioning - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers D100 mm - Feed drive motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3500 kg