Mesin bor radial cepat

UNBEKANNT radialbohrmaschine

Kondisi: bekas, Tahun pembuatan: 1968, Technical details: Bdjdpfx Aovpfzysbvsh Drilling capacity in steel (diameter): 40 mm Throat depth: 380 mm Drilling stroke: 240 mm Spindle taper: MT 5 Spindle speed: n/a rpm Feed rate: 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev (manual + automatic) Max. distance spindle/table: 200 – 800 mm Table clamping surface: 540 x 730 mm Table swivels: 360° Drill table adjustment: 600 mm (manual) Column diameter: Ø 220 mm Base plate clamping area: W: 510 x L: 510 mm Total power requirement: 4.0 kW Machine weight approx.: 1300 kg Machine dimensions approx. LxWxH: 1.2 x 0.95 x 2.35 m Operation via control panel and/or footswitch Mechanical thread cutting Including vice

Kondisi: bekas, Tahun pembuatan: 1962, Frequency 50 Hz Bsdpfxsrxg S Te Abvodh Operating voltage 380 V Control voltage 220 V Connected load 2.6 kVA Rated current 6.1 A Machine weight approx. 1 t

Kondisi: baik (bekas), Tahun pembuatan: 1984, nomor mesin/kendaraan: 332, Offer 24130 Technical specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drilling spindle taper: MK 4 - Quill stroke: 150 mm Bdedotxzrwopfx Abvoh - 12 spindle speeds: 102 – 2,000 rpm - 3 feed rates: 0.1 – 0.3 mm - Min./max. spindle-table distance: 310 / 610 mm - Drilling radius min./max.: 380 / 1,200 mm - Table height: 720 mm - Table size: 1,200 x 500 mm - Drive: 400 V / 2.0 / 2.4 kW - Required space approx.: W 1,200 x H 2,800 x D 2,300 mm - Weight approx.: 1,500 kg - Equipped with: - Thread-cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the rear machine side

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1980, Meja kerja 500mm x 1200mm Pergerakan lengan 600mm Penjepit alat MK 4 Kapasitas pengeboran 32mm pada baja Bodpfex N Ih Iex Abvodh Perangkat pembuat ulir Perangkat pendingin Pelindung pada bor Direkondisi total pada 2026

Kondisi: bekas, Tahun pembuatan: 1976, Technical details: Drilling capacity in steel (diameter): 32 mm Throat depth: ./x. . 400 / 50 mm Horizontal travel of drilling head: 400 mm Drilling head vertically adjustable: 400 mm Quill stroke: 150 mm Spindle taper: MK 4 Bdjdpfx Ajwi Iqvsbvoh Grinding spindle speed: 100 - 2000 rpm Spindle outreach: min./max.: approx. 400 / 50 mm Vertical arm adjustment: 850 mm Horizontal arm adjustment: 400 mm Arm length: 1360 mm Arm horizontal: swiveling mm/min Drill spindle speed range: 100...2 step rpm Feed rates: 0.1 / 0.2 / - step mm/rev Table size: 00 x 510 mm Distance table - lower edge of spindle: min./max.: 350 / 800 mm Total power requirement: 2.4 kW Approximate machine weight: 1.8 t Machine dimensions approx. LxWxH: 1.3 x 1.3 x 2.25 m Equipment: 2x base rails Possibility to mount a vertical table Accessories: various clamping devices

Kondisi: bekas, Tahun pembuatan: 1970, Radial drilling capacity in steel (diameter): 32 mm Arm reach: 1000 mm Maximum workpiece height: 1400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space requirement: approx. [missing value] WEBO Radial drilling machine Model: BR 32 V Year of manufacture: approx. 1970 Serial no. _____ Drilling capacity in cast iron/steel (solid): max. 40 / 32 mm Boring (with 50% pre-drilling): 60 / 80 mm Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 ranges/stepless: 60 - 1,850 rpm Base plate: 1,200 x 930 mm Installation height under the spindle: 200 - 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Horizontal movement of drilling saddle: 1,640 mm 9 feed rates: 0.06 – 1.0 mm/revolution Spindle drive: approx. 3 / 4 kW Total drive: 6 kW - 380 V – 50 Hz Weight: approx. 3.7 t Accessories / special equipment: • Manual mechanical clamping of arm and spindle box via hand lever • Automatic feed with depth stop via vernier • Stepless speed control within three gearbox ranges and two motor speeds, adjustable via hand lever • Right and left hand rotation • Electro-motorized vertical adjustment of the arm via cross switch • Ammeter for drilling motor • Coolant system with integrated coolant pump • Fixed drilling table, approx. 800 x 600 x 600 mm (height), vice, etc. Ideal machine for steel construction, toolmaking, and mechanical engineering! Condition: Older but good to very good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Bdsdpfx Abet H Smyovoh

Kondisi: sangat baik (bekas), de-1 Bsdjywzlpepfx Abvjdh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1982, G 30 Plate Bending Machine - Maximum sheet thickness: 30 mm - Maximum working length: 3,150 mm - Roll diameter: 500 mm - Main motor power: 37 kW Bdedpfx Abonfu S Djveh

Tahun pembuatan: 1968, Kondisi: baik (bekas), nomor mesin/kendaraan: 00248, 22311 Technical Data: - Max. working width: 3100 mm Bedpfx Absh U Sd Hjvsdh - Max. cutting capacity (St 40): 8 mm - Motorized back gauge: 10 – 750 mm - Front angular stop - Strokes per minute: up to 30 rpm - Drive: 400 V / 2 x 6.5 kW - Space requirement incl. back gauge, without front support arms: approx. W 4250 x H 1500 x D 2450 mm - Weight: approx. 11,000 kg

Kondisi: bekas, Tahun pembuatan: 1976, nomor mesin/kendaraan: 761907, General / Technical Data: Heavy-duty mechanical swing bending machine made from a robust welded construction, in very good condition Working width: 2000 mm Maximum material thickness for steel ST 50: 20 mm Upper beam (clamping beam) opening: max. 475 mm Bending beam adjustment: 200 mm, motorized height adjustment Bending angle: Adjustable up to 130° via electric rotary angle input Upper beam speed: 6 mm/sec Bending beam rotation speed: 1.25 rpm (approx. 90 sec for a 90° bend) Backgauge: Motorized adjustment from 50 to 999 mm, with digital length display Machine dimensions (H x W x D): 3600 x 4350 x 4400 mm (without pit / with bending beam platform) Control cabinet dimensions (H x W x D): 1800 x 1200 x 400 mm Bending drive motor output: 30 kW Upper beam (clamping beam) drive motor output: 22 kW Power supply: 500 Volt 50 Hz / Control voltage 220 Volt Weight: 24,500 kg Accessories / Special Equipment: • 5 sets of bending tools, each consisting of clamping and bending rails: R 8, R 12, R 15, R 20, R 40 • Folding backgauge • Central lubrication system • Machine documentation Notes: Bdjdpfxocvtbyj Abvsh • The machine comes from a maintenance operation • A pit with a depth of 900 mm (foundation) is required for the machine; the substructure of the swing drive visible in the pictures is intended solely for test runs and demonstration purposes.