Lifting tables

UWM UWM 2000 big

Kondisi: bekas, x-axis travel 800 mm y-axis travel 400 mm z-axis travel 300 mm Heidenhain digital readout Clamping surface of table 1000 x 520 mm Spindle speed range 40 to 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Cjdpfeqpl Uusx Aavori Required floor space approx. 1700 x 1600 x 1800 mm Deckel FP 2 B - Skew bed in travelling column design Universal swivel/tilt table including various SK40 holders, draw-in thread S20x2 Collet chuck holder Machine was overhauled at a cost of approx. €24,000.00

Kondisi: sangat baik (bekas), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm Equipped with control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg Cjdpfshmvawsx Aaveri

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar total: 6.400 mm, panjang total: 7.800 mm, tinggi total: 2.500 mm, berat keseluruhan: 30.000 kg, Brand new machine Machine for die-cutting, embossing, waste stripping and blank separation Specification: Max. sheet size: 830 x 1,150 mm Min. sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300 t) Speed: 7,000 sheets/h Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Manual non-stop feeder Automatic stack alignment at feeder 10" display at feeder Automatic non-stop roll-up delivery Stripping station Blank separation station Centerline Automatic separator sheet inserter for stack stabilization Crsdpfxet H Nhhs Aavoi Quick-clamping frame for top stripping tool and central stripping board Quick-clamping frame for blank separation station upper and lower tool Pneumatic locking frames and die-cutting plate locking APC 1 – automatic die-cutting pressure system APC 2 – platen tilting at platen exit 1x 4 mm die-cutting plate incl. 10x 1 mm make-ready plates 2x 5 mm die-cutting plates 1x Quicklock locking frame 2x locking frames without Quicklock QTM fine adjustment for make-ready plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, HYDRAULISCHE HOCHLEISTUNGS-BANDSÄGE-ANLAGE Hersteller: BEHRINGER Modell: HBM 440 A Credpjxw T Ugjfx Aavoi Baujahr: 2023 Zustand: wie neu – nur 82 Betriebsstunden Technische Daten: - Schnittbereich rund: 440 mm - Schnittbereich flach B x H: 440 x 440 mm - Minimal rund/flach: 15 mm / 12 x 12 mm - Sägebandabmessung: 6700 x 54 x 1,1 mm - Antriebsleistung: 11 kW - Schnittgeschwindigkeit: 15 – 150 m/min - Materialnachschublänge je Hub: 600 mm - Mehrfache Nachschublänge: max. 5400 mm - Maschinengewicht: 4600 kg - Abmessungen (L x B x H): 4900 x 2650 x 2700 mm - Transporthöhe: 2700 mm Ausstattung: - Kühlmittelanlage 200 l - Vollverkleidung der Säge - Späneförderer - BEHRINGER BT 65 Touch Control + Auto Feed Control - Automatischer Stabwechsel (max. 3000 kg) Zufuhrseitig (Einlaufseite): - Magazin KM 45 F-VR / 60-6.200 mm - Rundmaterial: 50 – 440 mm - Flachmaterial: 40 x 20 – 400 x 400 mm oder 440 x 430 mm - Schneidgutlänge: 600 – 6200 mm - Angetriebene Rollenbahn: 6100 mm - Materiallager nutzbar: 3000 mm - Schutzzaun Abfuhrseitig (Auslaufseite): - Metallband, Auswurfplatte, Ablagetisch Metallband: - Zum Transport von Zuschnitten, Gutteilen und Reststücken - Bandbreite: 550 mm - Bandlänge: 4200 mm - Beidseitige Führungen über 1000 mm Seitliche Auswerfer für kurze Stangen - Ablagetisch für Schnitte und Material: max. 1000 kg / Länge 2400 mm / nutzbare Tiefe: 1500 mm Zwischenverkauf vorbehalten ENGLISH TRANSLATION: HYDRAULIC HIGH PERFORMANCE BAND SAWING LINE Make: BEHRINGER Model: HBM 440 A Year of manufacture: 2023 Condition: as new – only 82 operating hours Technical Data: - Sawing capacity round: 440 mm - Sawing capacity flat WxH: 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Sawing band dimension: 6700 x 54 x 1.1 mm - Power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed each stroke: 600 mm - Material feed (multiple): max. 5400 mm - Machine weight: 4600 kg - Dimensions (L x W x H): 4900 x 2650 x 2700 mm - Height for transport: 2700 mm Equipment: - Coolant device 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + Auto Feed Control - Automatic bar changer (max 3000 kg) Infeed side: - Magazine KM 45 F-VR / 60-6,200 mm - Round material: 50 – 440 mm - Flat material: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Length of bars: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material stock: 3000 mm - Safety fence Outfeed side: - Metal belt, ejection plate, deposit table Metal belt: - For transport of cut-offs, finished and remnant parts - Belt width: 550 mm - Belt length: 4200 mm - Guides attached on both sides over 1000 mm length Side ejection device for short bars - Table for material/cut parts: max. 1000 kg / length 2400 mm / usable depth: 1500 mm Subject to prior sale —— Note: Translated/rewritten for professional listings on machine trading platforms, using industry terminology and specifications.

Kondisi: bekas, Adhesive application Crjdpfx Aajcht Nyevji Glue application Adhesive dispensing - Glue application for package heights up to 300 mm using 1 applicator roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Dimter accessories

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 150258, Offer 24348 Credpsut Uiqefx Aavei Technical Data: - Adjustable pressing force: 15 t - Infinitely variable stroke: 150 mm - Mandrel bending device up to: 6000 mm - Mandrel bending angle: 180° - Drive: 400 V / 4 kW - Required space (approx.): W 1500 x H 1200 x D 1100 / 7500 mm - Weight (approx.): 1500 kg Bending Capacity: - Flat bar horizontal bending: up to 120 x 10 mm - Tube bending (pressing method): up to approx. 1 1/2" - Mandrel bending: up to 42 mm Tooling: - Press brake tools - Tube bending tools for horizontal bending - Mandrel bending tools (steel): approx. 21.3 R 50; 26.9 R 57; 30 R 67; 33.7 R 72.5; 42.4 R 92.5 mm - Mandrel bending tools (plastic): approx. 10 R 60; 12 R 65 + 85; 17.2 R 100; 28 R 65; 33.7 R 120; 36 R 100 mm

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Screw Pump Manufacturer: Busch Type: Cobra DS 600 E Condition: very good condition Cedod Rafbepfx Aaveri Availability: ex-stock

Tahun pembuatan: 2001, Kondisi: bekas, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We are offering a 25,000-litre storage tank for the storage of water and wastewater as follows: The tank is a 30 cbm (cubic metres) steel storage tank. Material: S235JRG2 steel. Includes manufacturer’s certificate according to DIN standards and type plate. The tank has been cleaned internally and externally insulated with bitumen. Suitable for both underground and above-ground storage. Tank dimensions: Length: approx. 8,390 mm Diameter: approx. 2,000 mm Weight: approx. 4,500 kg Shape: cylindrical Fittings: according to customer requirements For use as a fire water storage tank, we can additionally supply a suction line with A-type fixed coupling (to DIN standard). Of course, you can also design your tank system together with us! All our installations are thoroughly inspected and checked by selected staff in our company. We can also offer cost-effective delivery on request. You are welcome to inspect our installations at any time. Further tanks for above-ground and underground storage are available in all sizes and can be viewed at our premises. Have we convinced you with our offer? If you have any questions or requests, simply give us a call – one of our experienced employees will be happy to advise you. General information: All offers are ex works Warstein, loaded free of charge. Delivery can be offered at low cost for an additional charge. Delivery time: immediately. Cedpfec Nkyzex Aavsri You will receive an invoice with VAT shown separately. We also purchase existing tank installations and, as a certified specialist company according to the Water Resources Act (WHG), we can professionally empty, clean, dismantle, and remove these systems. Best regards from Warstein, Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jam operasional: 50 h, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, jenis laser: laser serat, produsen sumber laser: MAX Photonics, jam kerja laser: 10 h, daya laser: 3.000 W, panjang gelombang laser: 1.070 nm, ketebalan pelat baja (maks.): 22 mm, ketebalan maksimum lembaran baja tahan karat: 12 mm, tebal plat aluminium (maks.): 12 mm, ketebalan lembaran kuningan (maks.): 5 mm, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jenis pendinginan: air, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, MESIN PAMERAN Di sini kami menawarkan mesin pemotong laser presisi tinggi dengan daya laser 3000 Watt. Tipe: LG-1313/3kW HaiCut Premium Line - Dilengkapi dengan fitur maksimal - Sistem peralihan 3 gas inovatif (Tekanan dan jenis gas dapat dikontrol melalui perangkat lunak) Memotong dengan N2, O2, gas campuran (udara terkompresi) - Pintu depan otomatis - Rangka mesin dilapisi dengan chamotte - Rangka mesin dan sumbu diukur dan disetel dengan Interferometer Renishaw Tujuan kami adalah menawarkan mesin laser terbaik, paling stabil, dan paling terjangkau yang saat ini tersedia di pasar. Mesin kami ideal untuk bengkel dan perusahaan perbaikan. Perpustakaan parameter pemotongan yang dirancang dengan sempurna juga termasuk dalam cakupan pengiriman, serta layanan kelas satu di lokasi. Harap perhatikan juga penawaran sewa/beli yang menarik dari kami. Mesin baru, Kami akan dengan senang hati mendemonstrasikan mesin tersebut di tempat kami. Jarak perjalanan: sekitar 1300 x 1300 mm Ukuran meja: sekitar 2500 x 1300 mm (artinya ada ruang di dalam mesin untuk pelat berukuran sedang) Meja pemotong yang dapat ditarik Untuk memotong logam dengan presisi tinggi Semuanya sudah terpasang dan disetel Perangkat lunak pemotongan dalam bahasa Jerman Termasuk modul kotak Sangat mudah dioperasikan Cukup nyalakan dan mulai Sumber laser dari Max Photonics (versi G5/CE) dengan daya 3000 Watt Langkah-langkah perlindungan tabrakan elektronik dan mekanis yang ekstensif pada kepala pemotong Jendela pelindung laser yang besar di pintu depan Pintu depan otomatis Tirai pengaman cahaya untuk perlindungan operator yang maksimal Memotong baja tahan karat hingga 12 mm Memotong baja hingga 22 mm Memotong aluminium hingga 12 mm Memotong kuningan hingga 5 mm Kualitas industri yang berat Sistem lengkap / siap digunakan Pencahayaan area kerja LED Koneksi pipa 200 mm untuk pembuangan asap Termasuk kipas pembuangan Opsi berikut juga tersedia: - Pengubah nozel otomatis (Opsional) - Pemusatan nozel otomatis (Opsional) - Deteksi pelat mentah dan penataan bagian melalui sistem kamera CypVision (Opsional) - Membaca file 3D (.stp) dan pengembangan (Opsional) Credpfoi Igaujx Aavji - Membaca langsung dari SolidWork, SolidEdge, Inventor, dll. (Opsional) - Penataan, kalkulasi, pengelolaan sisa pelat, dll. (Opsional) - Sistem ERP dapat dikombinasikan dengan semua mesin pemrosesan lembaran logam Anda yang lain (Opsional) Penyewaan atau pembelian dengan angsuran dimungkinkan melalui mitra keuangan kami. Apakah Anda memerlukan kinerja atau ukuran meja yang berbeda? - Bukan masalah, kami memiliki beberapa mesin di stok atau tersedia dalam waktu singkat. Penjualan hanya dilakukan kepada pengusaha. Pengiriman/konsultasi/penjualan hanya di Jerman/Austria/Swiss. Dimensi mesin sekitar: Lebar: 3,5 m, Tinggi: 2,1 m, Kedalaman: 3,5 m Berat total: sekitar 3,5 ton

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Crsdpfxji Hn Srs Aavsi Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)