Gunting guillotine

Vöest Alpine BT 5x2000

Kondisi: bekas, Tahun pembuatan: 2007, Technical data: Speed: 2800 rpm Saw blade: ø 380 mm Ksdperwlwvofx Adwjnd Motor output: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Kondisi: baik (bekas), Tahun pembuatan: 1991, Kapasitas pemotongan 4 mm, panjang potong 2550 mm, stopper belakang bermotor, lengan penyangga 700 mm dengan penggaris, penyesuaian celah potong, penahan jari, pedal kaki, penahan pelat pneumatik Knedpfsq Tqwrjx Adwed

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), BSTA 60 HL, with BBV 202/120 Kodeizkmtspfx Adwend CE certification possible Contact us!

Kondisi: bekas, Tahun pembuatan: 2020, gaya penjepit: 90 kN, volume langkah: 113 cm³, tekanan injeksi: 2.400 batang, berat keseluruhan: 7.500 kg, jam kerja: 4.200 h, diameter konveyor sekrup: 30 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Knsdpfx Asv S H N Rodwjd Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, lebar meja: 700 mm, panjang meja: 2.000 mm, Control: HEIDENHAIN TNC-426 Travel distance X-axis: 2000 mm Ksdpfx Adsvfr Hbowend Travel distance Y-axis: 800 mm Travel distance Z-axis: 800 mm Spindle taper: ISO 50 Speed range: 20 - 3000 rpm Spindle power: 17 kW

Kondisi: baru, Pressure: 28 t Stroke: 180 mm Table size: 300 x 550 mm Piston diameter: 130 mm Knodpfogvkmrsx Adwod Working speed min.: 2 m/s Working speed max.: 9.8 m/s Return speed: 20 mm/s Maximum pressure: 200 bar Machine weight approx.: 0.65 t Total power requirement: 4 kW Space requirement approx.: 1.15 x 0.75 x 1.1 m • The Profi Press horizontal bending and straightening press is a versatile hydraulic press, specifically designed for carrying out bending, profiling, and straightening operations. The machine's applications are varied and depend on the accessories installed on the worktable, tool holder, and in the holes and pin holes. • The HB-28 model is equipped with an angle scale on the worktable for light bending measurements. The press can also be supplied with tools (such as block punches) that can be mounted on the tool holder, as well as tools installable in the holes and pin holes to perform a variety of operations. • The hydraulic system can be adjusted using the pressure and flow control valves, which influence the press force and the speed of the press. The press is equipped with a built-in pressure gauge. • The control panel is used to operate and display the piston stroke, and to select between manual or automatic operation. The HB-28 model is also fitted with an integrated memory for up to 4 different programs. • Operation is via electric foot pedals.

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 75 t Outreach: 300 mm Stroke: 8 - 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram area: 430 x 230 mm Pass-through opening in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, featuring new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for mounting tool change consoles - 2 roller rails in the table - mechanical overload in ram (rupture plate) The following work will be carried out on the machine / partial overhaul: - Machine will be completely disassembled, checked, seals replaced, defective parts exchanged, etc. - Machine will be newly painted Kodpfx Aed Nl E Uedwjnd - new Balluff cam switch mechanism - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - current UVV (accident prevention regulation) inspection with brake time measurement

Kondisi: baru, Tahun pembuatan: 2024, Ring bending machine Zopf - incl. digital display - three driven rolls with smooth surface - manual adjustment of the upper roll - Working position horizontal and vertical - Model ZB 30/3 MD - Shafts supported by tapered roller bearings - Use of replaceable slide rails on the guide carriage - Roller diameter 76-86 mm - Shaft diameter 20 mm - Shaft speed 11 rpm Knjdpjdktnvsfx Adwod - Drive motor 0.18 kW - Bending capacity: round tube 30 mm - Flat bar 25x6 mm - Angle iron 20x20x4 mm - Weight 80 kg

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: 5255, Press force: 30 t Strokes per minute: 100-600 spm Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left-hand side Adjustable stroke: 16-40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Kedocxxu Njpfx Adwjnd Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, equipped with air cooler, stroke counter, separate control cabinet, pneumatic clutch, left-hand BRUDERER precision double-roll feeder.

Kondisi: baik (bekas), Tahun pembuatan: 1977, Pressing force 250 t Upright distance 1,120 mm Knodpsx Ug Dsfx Adwod Stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface 1,100 x 900 mm Table height above floor 950 mm Lateral upright clearance 700 mm Ram surface 1,100 x 900 mm Speed down mm/s Speed up mm/s Working speed mm/s Oil capacity 730 l Drive power 56 kW Weight 25 t Space requirements (WxDxH) 2.3 x 1.55 x 3.96 m Additional Information with electro-hydraulic drive, hydraulic (20) and electrical control system according to UVV, light curtain (Sick), upper and lower stroke limit, pressure- and travel-dependent controllable, cut shock absorber, short-stroke control, new control (Mitsubishi), safety control (PNOZ Multi), screen control with touch screen, control cabinet