Lain

Valtra T 235 V, Frontgewicht, 50 km/h,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 50 l, warna: merah, berat keseluruhan: 2.600 kg, berat kosong: 2.500 kg, daya angkat: 1.000 kg/m, tinggi angkat: 3.310 mm, kondisi ban: 100 persen, konfigurasi gandar: 2 gandar, jumlah tempat duduk: 1, volume sekop: 0,4 m³, lebar bucket penggalian: 160 mm, Tahun pembuatan: 2025, kapasitas angkut: 980 kg, Perlengkapan: boom yang dapat disesuaikan, garpu palet, hidrolik, kabin, kopling trailer, kunci diferensial, lampu depan tambahan, pelindung kepala, penggerak semua roda, sekop standar, The H&R 2210-T telescopic loader is equipped with the new 3-cylinder Perkins turbo engine, offering 18.5 kW (built in Mannheim, Germany), which meets the Euro 5 standard even without a diesel particulate filter. The new turbo engine is exceptionally economical, and with the 2-stage hydrostatic drive, it achieves a top speed of approx. 16 km/h. Thanks to its generous steering angle of 42° and tight turning radius, it is highly maneuverable even in confined spaces. The 2210T wheel loader with telescopic boom comes standard with a quick-attach pallet fork and a standard bucket, allowing you to start work immediately. The additional hydraulic circuit enables the use of various attachments for the farm loader. The telescopic arm gives the 2210-T excellent reach. The electronic gear control (E-Gang) on the joystick makes operation particularly comfortable. H&R loaders are thoroughly optimized both technically and visually at our facility and undergo comprehensive quality checks. In addition, each machine receives extensive corrosion protection treatment. Our loaders are CE-compliant in accordance with the EU Machinery Directive. TUV Süd certification for individual operating approval in accordance with §21 StVZO (road approval / operating permit as self-propelled work machine) is available for our machines. Advantages of the H&R 2210T Telehandler: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic boom • Heated comfort cabin • Incl. pallet fork • Incl. standard bucket 150 cm • Joystick with float position and E-Gear • Auxiliary hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Rear-view camera with display • Rotating beacon • LED work lights front & rear • Wide tyres 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE-compliant to EU Machinery Directive Price Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Optional: 2-year warranty: €590.00 TÜV road approval / operating permit as workplace machine: €595.00 Transport within Germany & Austria upon request Technical Specifications Engine: 3-cylinder Perkins turbo Power: 25 hp Emission class: Euro 5 Lifting capacity: 980 kg Lift height: 3310 mm (underside of standard pallet fork) Dumping height: 2796 mm (underside of standard bucket tipped) Lift / Lower time: 4.0 / 3.5 seconds Hedpfx Agsul Af Ds Reni Wheelbase: 1.6 m Dimensions (L x W x H): 3710 x 1496 x 2340 mm Weight: 2430 kg Tyres: 31 x 15.5 - 15 Accessories and spare parts available from us. When making inquiries, please provide your phone number!

Kondisi: baik (bekas), Tahun pembuatan: 1972, Scissor lift table, scissor lifting table, scissor lift platform, single scissor lift table Hnedpfemghawex Ag Roi -Manufacturer: Lödige, scissor lift table -Load capacity: 1,000 kg -Platform: 3,000 x 2,000 mm -Lowered height: 390 mm -Lifted height: 2,000 mm -Hydraulic power unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3,000 x 2,000 x H390 mm -Net weight: 2,100 kg

Kondisi: bekas, Hydraulic Low-Profile Scissor Lift Table FLEXLIFT FLUNDER Type 1500 / 100 (without hydraulic power unit) Year of manufacture: 1991 Rated load capacity: 1,500 kg Lifting capacity (practically tested): 1,000 kg (at approx. 350 bar) Platform size: 2,100 x 1,400 mm Lift height (max): 930 mm Hnsdjl Nbqcjpfx Ag Rji Lowered installation height: 100 mm (with mounting frame) Raised installation height: 1,030 mm Hydraulic operating pressure: 350 bar = lifting capacity 1,000 kg Hydraulic motor power: 1.5 kW Power connection: 400 Volt, 50 Hz - Mechanical-hydraulic safety limit switches stop lowering when the safety bar is activated - Without hydraulic power unit - Without electric control unit Mounting frame length: 2,270 mm Mounting frame width: 1,580 mm Mounting frame height = installation height (lowered): 100 mm Net weight of lift table: 500 kg Good condition

Kondisi: baru, Lifting capacity in kg: 1,000 kg Reach: 4,000 mm Height: 3,000 mm (underside of jib) Total column height: 3,790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable system - Drag cable, cable sag approx. 800 mm Hedexak Hxjpfx Ag Rsni - Floor-controlled operation via pendant controller Includes: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-fall - Painted in RAL 5017 traffic blue - Lifting capacity: 1 t - Hook path: 3,000 mm - Maximum hook position: 2,442 mm - Calculation basis: FEM 9.901 - Mechanism group: 2m / M5 - Lifting, 2-stage (pole-changeable): 1.3 / 5 m/min - Lifting power: 0.22 / 0.9 kW - Duty cycle: 60% ED - Switching frequency: 360 cycles/hour Overload protection The crane system meets the requirements of the Machinery Directive 2006/42/EC and the currently applicable accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set), size LS 200 - Comprising 8 pcs. M27 mm x 800 mm with 1 steel template (500/8) - For foundation mounting, incl. grouting accessories For the alignment of the slewing jib crane, an assembly gap between the base of the column and the building floor must be provided. This assembly gap is to be grouted by the customer after approx. 4 weeks of crane operation. The illustration shows a similar crane system.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, tinggi total: 1.060 mm, berat kosong: 4.300 kg, kapasitas angkut: 4.000 kg, berat keseluruhan: 4.300 kg, panjang total: 6.000 mm, lebar total: 3.000 mm, lebar meja: 3.000 mm, tinggi meja: 1.063 mm,

Kondisi: bekas, Hydraulic Scissor Lift Table TREPEL - L. A. VAN EIJLE & Co. Year of manufacture: approx. 1980 Load capacity: approx. 5 tons Platform size: 1700 x 1100 mm Lift height (max.): 515 mm Hnedpfx Agsd I Nrpo Roi Table height when lowered with rail wheels: 535 mm Table height when lowered without rail wheels: 480 mm Table height when raised with rail wheels: max. 1050 mm Table height when raised without rail wheels: max. 995 mm Travel speed of rail carriage: approx. 8.5 m/min Motor power: 4 kW Power supply: 400 V, 50 Hz - Pendant control for up/down operation - Safety limit switch - Hydraulic unit with reservoir integrated in the base frame - Scissor lift equipped with two lift cylinders - The table is rail-mounted and movable, fitted with 4 wheels on the base frame, Ø 200 mm - Rail wheels driven by SEW geared motor and chain Required space (L x W x H): 2070 x 1350 x 1050 mm Net weight: approx. 1.3 tons Good condition

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Table dimensions: 200x100 cm Load capacity: 5 t NO HYDRAULIC PUMP Hjdpfxopq Imne Ag Rjni price per piece

Kondisi: bekas, 2 palettenplattformhubtische mit besonders niedriger Bauhöhe Modell HY1501 Tragkraft 1.500 kg Spannung 240 Volt Plattformmaß 1.600 mm x 800 mm Niedrige Bauhöhe: nur 100 mm vom Boden Sicherheitsleisten Auffahrrampe inklusive Elektro-hydraulisches Aggregat Bediensteuerung In ausgezeichnetem Zustand Hnjdpjh Rkmwefx Ag Rei

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, - Gesamtlänge: 8,1 m - Gesamtbreite: 1200 mm - Höhe: 950 mm Hydraulischer Hub, Hubkraft ca. 1 Tonne. Hnedpfx Agotddw Ae Rei

Kondisi: sangat baik (bekas), Gruse Steinbock Type: ELD 1-16-1 SO Gruse Lift Table ELD 1-16-1 Effortless lifting of heavy loads Scissor Lift Table: Double Scissor Lift Table Lift Table ELD Type Description: Model Designation: ELD Load Capacity: 1000 kg Closed Height: 350 mm Effective Lift: 1600 mm Max. Height: 1950 mm Table Dimensions: 1250 x 800 mm Base Frame: 1250 x 750 mm Lifting Time: approx. 21 sec. Motor Power: 2.3 kW Weight: approx. 600 kg Condition: used Scope of delivery: (see image) (Technical specifications subject to change and errors excepted!) Hnedpfxerhkimj Ag Rei If you have any further questions, we are happy to assist you by phone.