2011 VAN HOOL 3B0072 | RANGKA BAJA GALVANIS | VELG ALUMINIUM | REM CAKRAM BPW | TUV APK: 11-04-2026

VAN HOOL 3B0072 | GALVANISED STEEL CHASSIS | ALU RIMS |B...

Kondisi: bekas, pendaftaran pertama: 03/2011, warna: lain, Tahun pembuatan: 2011, SEMITRAILER BAGUS DAN RAPI DENGAN ATAP BARU DAN TÜV / APK YANG MASIH BERLAKU Fodpfxexrz Rfj Adtspb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed Fsdpfxovwlqqs Adtspb - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 11/2012, warna: lain, Tahun pembuatan: 2012, Berat kosong: 8.290 kg As roda 1: kiri 14 mm, kanan 14 mm As roda 2: kiri 14 mm, kanan 14 mm Fpodpfx Ajxt Hwtedtsb As roda 3: kiri 14 mm, kanan 14 mm

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 10/2025, warna: lain, Tahun pembuatan: 2011, Bobot kosong: 7,955 kg Gandar 1: kiri 6 mm, kanan 6 mm Gandar 2: kiri 10 mm, kanan 10 mm Fjdpfx Ajxr Aqgodtepb Gandar 3: kiri 10 mm, kanan 10 mm

Kondisi: bekas, Tahun pembuatan: 2003, Technical details: Pressing force: 40 t Hopper opening: 1200 x 730 mm Material: Cardboard, plastic – e.g., PET bottles Voltage: 400 V / 50 Hz Total power requirement: 16.4 kW Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fsdpfxou Nw Ezo Adtjpb Fully automatic hydraulic CHANNEL BALER for recycling applications – Incl. feed unit/conveyor belt, LxW: 4500 x 1000 mm, motor-driven – Equipped with automatic 3-fold tying unit – Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm with 1.2 m³ volume Bale size (LxWxH): 300–1500 x 800 x 800 mm Bale weight: 250–450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; Filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; Fill height: 2500 mm

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 01/2012, warna: lain, Tahun pembuatan: 2012, Berat kosong: 7,005 kg Poros 1: kiri 14 mm, kanan 14 mm Poros 2: kiri 14 mm, kanan 14 mm Fsdpfxsxr Abfs Adtepb Poros 3: kiri 14 mm, kanan 14 mm

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 03/2011, warna: lain, Tahun pembuatan: 2011, Berat kosong: 7.865 kg As 1: kiri 8 mm, kanan 8 mm Fsdpsxqxq Hofx Adtjpb As 2: kiri 10 mm, kanan 10 mm As 3: kiri 8 mm, kanan 8 mm

Tahun pembuatan: 2003, jam operasional: 43.000 h, Kondisi: perlu perbaikan (bekas), nomor mesin/kendaraan: HBC 140 2x75kW 2003 (W230-005), nl-naar-en Fpsdpfskcgynsx Adtob

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 03/2011, warna: lain, Tahun pembuatan: 2011, Berat kosong: 7.260 kg As roda 1: kiri 10 mm, kanan 10 mm As roda 2: kiri 10 mm, kanan 6 mm As roda 3: kiri 10 mm, kanan 10 mm Fpodpfxoxr Ambe Adtsb

Tahun pembuatan: 2008, Kondisi: bekas, 20081 Fpodpfsw Ia Ngjx Adtob