Meja putar horizontal dan vertikal

VERTEX HV-4

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard - Splash guard - Machine light - Electrical diagram Iiodpfx Asrtd Uwoahok - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Maximum pressing length approx. 2,750 mm Maximum gluing width approx. 1,750 mm 10 freely movable support arms, each equipped with a hydraulic pressing cylinder and one counterpressure unit adjustable in increments Iiedpfx Asww Awgeahjk Pressing cylinders can be freely positioned on the support arms Support arms are suspended from above, allowing for quick transfer from one side to the other Dimensions of pressing unit cylinder: 115 x 50 mm Dimensions of counterpressure unit: 115 x 50 mm Maximum cylinder stroke approx. 30 mm Gluing rack can be moved on rollers Installation dimensions (L x W x H): 3.1 x 1.0 x 2.25 m Pressing cylinders have been pressure-tested in stock.

Kondisi: sangat baik (bekas), various steady rests Iedpfx Aod E Tb Esaheik

Kondisi: baru, Sheet thickness: 1.6 mm Iedpfeftd Uaox Aahoik Pressing force: 4 t Blade length: 156 mm Angle adjustable: from fixed to fixed degrees Table area: 450 mm x 305 mm Total power requirement: manual operation Machine weight: approx. 95 kg Dimensions (L x W x H): 530 x 380 x 480 mm

Kondisi: baru, Tahun pembuatan: 2025, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Isdpsi Dfidjfx Aaheik Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, - Digital display. - Accessories included. Centers Center height: 170 mm Center distance: 650 mm Swing diameter Over bed: 350 mm Over cross slide: 196 mm In the gap: 535 mm Width in front of face plate: 165 mm Spindle Spindle bore: 42 mm Spindle nose: D1-4" Camlock Taper in sleeve: No. 3 MT Spindle speeds 3 speed ranges: 0 – 3,250 rpm Main motor: 7.5 kW (10 HP) Iiedpfjtr Ud Sex Aahsk Bed Slideway width: 318 mm Guideway type: V and flat Cross slide Width and length: 180 - 850 mm Travel: 250 mm Top slide Width: 90 mm Travel: 130 mm Tool holder: 20 x 20 mm Quick change toolpost: Dickson No. 2 Tailstock Quill diameter (nominal): 63 mm Travel: 145 mm Taper: No. 4 MT Offset: ±12 mm Leadscrew Diameter: 32 mm Thread: 6 mm pitch or 4 T.P.I. Threads Metric pitch: 0.2 – 14 mm (51) Inch thread T.P.I.: 2 - 56 (56) Module pitches: 0.2 – 3.5 (20) Diametral pitch (D.P.): 8 – 56 (20) Feed Metric (R10 series): 0.018 – 1.2 mm/rev Inch (R10 series): 0.0007 – 0.048 "/rev Face feed = approx. half of longitudinal values Machine height Floor to spindle center: 1,070 mm Overall length 1,250 mm between centers: 2,500 mm Overall width: 1,100 mm Overall height: 1,300 mm Coolant pump Type: AQ 3MG Headstock oil pump Type: Interlube three-phase 27662-131 Weight 1,250 mm between centers: approx. 1,450 kg

Kondisi: baru, Diameter 200 mm Height 105 mm Iijdpshuxbrefx Aahjk Machine weight approx. 25 kg Required space approx. 400 x 280 x 150 mm

Tahun pembuatan: 1972, Kondisi: siap digunakan (bekas), Table diameter: 300 mm Height in horizontal position: 155 mm Iodpfxod Rlifo Aaheik Width: 500 mm Depth: 500 mm

Kondisi: baru, Diameter 200 mm Height 105/265 mm Centre height 105 mm Iijdpfx Aajupxd Rshek Machine weight approx. 41 kg Required space approx. 400 x 330 x 310 mm

Kondisi: bekas, with mounted three-jaw chuck Iiedpfx Aasda I Rvshek Table diameter: 200 mm Bore approx.: 18 mm Height: 100 mm Total height with chuck: 165 mm Width: 270 mm Length: 320 mm