Jembatan derek Hall derek Derek landasan pacu Derek

Vetter Stahl 4000KG 4t 6,5m x 2,6m Kranhimmel Portalkran + Stahlbau + Kran

Tahun pembuatan: 2023, Kondisi: baru, * Year of manufacture: 2023 (brand new); * Prime Power (PRP): 32 kVA / 26 kW; * Rated Standby Power (ESP): 33 kVA / 26 kW; * Rated voltage: 400V; * Rated frequency: 50Hz; Dodpfx Ajl Iyyujhuour * Equipped with terminal strip (without external sockets) * Dimensions: 2,225 x 970 x 1,185 mm (LxWxH) – Weight without fuel: 137 kg

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. Djdpfsqt Dmysx Ahuour The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: bekas, Mount: MK 4 Duedpob N Ezrefx Ahuer

Kondisi: bekas, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtain-sided low-bed trailer, heavy-duty trailer, low-loader for machinery transport Dodpet N Antefx Ahusur First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Deck height: 840 mm Loading height under curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (can also be used with the curtain frame removed and the tarpaulin pushed forward) - Spare wheel mounted at front bulkhead - Separate lifting and lowering of front and rear axles - Middle axle designed as lift axle - Towing drawbar – telescopic, multi-stage extension - Extremely robust lashing eyes on the outer frame and in vehicle center - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is from first ownership. The trailer has been de-registered since 2025.

Kondisi: bekas,

Tahun pembuatan: 1980, Kondisi: baik (bekas), A very well-maintained, used cycle-controlled lathe from Weisser Heilbronn with SIEMENS control. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel, X-axis: 350 mm Travel, Z-axis: 1850 mm Spindle nose: DIN 55022, size 8 Number of spindle speeds: 18, 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. permissible torque at spindle: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Multifix quick-change toolpost in front of the centre, size 'C' 4-position turret behind the centre Tool holder Dujdogyy I Aopfx Ahuer Coolant system Travelling steady, pneumatically operated Technical data and dimensions subject to change. A video conference via WhatsApp is possible by appointment.

Kondisi: bekas, Scrubber dryer, floor cleaning machine, sweeper - Handover in as-is condition as inspected - Machine is without battery, brush, and squeegee - Working width: 500 mm - Charger Duodpec R S E Ssfx Ahuor - Quantity: 1 unit available - Dimensions: 1150/520/H950 mm - Weight without battery: 66 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, diameter putar di atas sled silang: 340 mm, panjang pembubutan: 2.000 mm, diameter pembubutan: 570 mm, lubang spindel: 83 mm, Weiler Voest Alpine E50 Drehmaschine Djdpfxon Hp T As Ahuour Inklusive 3-Backenfutter und 6 Multifix-Werkzeughaltern

Tahun pembuatan: 1981, Kondisi: bekas, Translation: Pressing force: 40 t Upright spacing: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H 7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Duodpeb U Hw Tefx Ahuer Hydraulic cushion pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min With hydraulic draw cushion, speeds: Rapid advance speed: 240 mm/s, steplessly adjustable

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jenis kontrol: Kontrol NC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: hidrolik, produsen pengendali: MG, model controller: 4-AXIS, jumlah rol: 4, diameter roller (bawah): 245 mm, diameter rol atas: 265 mm, diameter roll samping: 185 mm, diameter rol: 280 mm, panjang rol: 2.550 mm, lebar kerja: 2.500 mm, tinggi kerja: 700 mm, ketebalan lembaran (maks.): 14 mm, ketebalan pelat baja (maks.): 12 mm, ketebalan maksimum lembaran baja tahan karat: 10 mm, berat keseluruhan: 7.500 kg, panjang total: 4.200 mm, lebar total: 1.500 mm, tinggi total: 1.600 mm, daya: 18 kW (24,47 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, jumlah tampilan digital: 3, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, rol atas yang dapat berputar, rol yang dikeraskan, sistem pelumasan terpusat, en-to-de Dusdpfoxw S Eqjx Ahujr